Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this br...

This is a pair of Traxxas Aluminum Left/Right Caster Blocks (C-Hubs) in Green. Fits the following models:Ford Fiesta ST RallySlash 4X4 PlatinumSla...

Traxxas XO-1 Mod 1 Spur Gears are available in 46, 50 or 54 tooth count options to fine tune the gear ratio of your model, this is a 46 tooth Spur ...

This is a pack of four replacement Traxxas TRX-4 Bumper D-Rings with mounting screws. Features: Factory Replacement Bumper D-Rings Red in Color I...

Shock tower, front Replacement part for these models: Hoss® 4X4 VXL Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4

Skidplate, transmission, nylon (black)/ coverReplacement part for these models:E-Revo VXL Brushless

This is a replacement Traxxas Rear Upper and Lower Bulkhead Set, for use with the TRA8622 Chassis only. This set includes the upper and lower bulkh...

FEATURES: - Water repellent Nylon mesh- Protects chassis from dirt and debris, yet is breathable and superior to Lexan covers that trap heat- Zippe...

Product Specifications Gear Type Pinion Material Steel Part Type Gears Tooth Count 18 Tooth Gear Pitch 0.5 Module

Overview The "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black a...

Overview The "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black a...

Overview The "Pro" Pinions are precision machined from aircraft aluminum, lightened and then they're coated twice with a super hard, black a...

Overview The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. ...

Overview 32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears the...

OVERVIEW: This custom designed Wheelie Bar Set is manufactured from super-tough material for long-lasting durability and performance. The perfect a...

Product Details These tough steel shock shafts will withstand the most extreme terrain, providing smooth and consistent shock absorber performa...

Product Details These high-quality set screws are the perfect parts to carry as spares in your RC tool box. Features Super-tough steel for long...

RPM A-arms for the 2.5R & 3.3 versions of the Traxxas T-Maxx are built to handle some serious abuse! We've redesigned these a-arms to compensat...

This is the Servo Saver for the Traxxas Funny Car. Features: Plastic construction   Includes: (1) Servo Saver (1) Screw

Product Details The ADS-5 SRS Servo is designed to give you fast and precise steering. Resilient to the elements and built from hard-wearing ma...

OVERVIEW: These high-quality steel washers are the perfect spare part when servicing your ARRMA vehicle. FEATURES: Super-durable steel for long-las...

OVERVIEW: These high-quality wheel axles are manufactured from strong and durable materials for maximum performance on all terrains. FEATURES: Stro...

Features:Molded plastic construction, blue in color Includes:Front and Rear Shock Tower with black plastic Braces

These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...

This is the Traxxas pair of Composite GTR Shocks for the Traxxas Rally VXL.Features: Black in color Composite construction Fully assembled - with ...

This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...

This is the rear suspension arm set for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Nylon construction that is black in colorIncludes: Low...

This is the Traxxas set of four 12mm Blue Anodized Aluminum Hex Wheel Adapters. With Traxxas’ new hex wheel adapters it’s now possible to add the s...

This is a pair of Rear Progressive Rate White Shock Springs forthe Traxxas Slash 4x4 Vehicles. Features White in colorSteel constructionProgressive...

This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement work...

TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...

This is the Traxxas Telemetry Expander Mount for the Slash, Stampede 4x4, and Rally.Features: Made of durable material For the Traxxas Slash, Trax...

This is the Telemetry Expander Seal Kit for the Traxxas X-Maxx Monster Truck.FEATURES:Seals telemetry expander box and protects components from dir...

TRA6534 Telemetry trigger magnet holder/ magnet 5x2mm (1)

This is the optional tall battery hold down retainer for the Traxxas XO-1 on-road car.Features: Allows the installation of taller multi-cell batter...

These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...

This is an optional Traxxas Center Differential Kit, and is intended for use with the Traxxas E-Revo and E-Maxx trucks. The Traxxas center differen...

These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...

Traxxas primary forward and reverse gears for the Traxxas T-Maxx 3.3. Gears are constructed of steel and plastic. This package includes;One Plasti...

This is the optional two speed close ratio gear set for the Traxxas Revo. Only Revo offers the ability to custom tailor the 2-speed gear ratios for...

This is the Fuel Cap Pull Ring/Shut-Off Clamp set for the Traxxas Revo.FEATURES:Plastic constructionSimple, squeeze-clamp restricts fuel line for e...

This is the Traxxas left electronics box for the Traxxas Revo 3.3.Features: Constructed of plastic Holds the high torque and micro servos for the ...

Guards,Steering Servo:Revo, Revo 3.3,SLY (2) These are the replacement Steering Servo Guards forthe Traxxas Nitro Revo Monster Truck. Features Nylo...

TRA5215 Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm eclip(requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

These are the front turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Front...