TRA2557 Cap Head Screw 3x30mm Slash (6)
TRAXXAS
Screws, 3x30mm cap-head machine (hex drive) (6) 3x30 mm cap-head machine screws with hex drive heads. Set of six.
Screws, 3x30mm cap-head machine (hex drive) (6) 3x30 mm cap-head machine screws with hex drive heads. Set of six.
Body clips, black (12) (standard size) Standard-duty black body clips. Sold as a pack of 12. Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
Screws, 3x25mm countersunk machine (hex drive) (6)
Traxxas front body mounting post set is constructed of plastic and black in color. Bottom of Mounting Posts feature a square base that inserts into...
View full details
O-ring set: for carb base/ air filter adapter/high-speed needle (2)/ low-speed spray bar (2) Replacement part for these models: TRX® Pro .15 TRX®...
View full details
Gaskets, head (aluminum) (2) Replacement part for these models: TRX® Pro .15
Stud & nut, carburetor attachment Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
This is a Replacement Slide Carb Bellcrank Link for the Traxxas T-Maxx. This part is connected to the engine throttle linkage.
Suspension pin retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. Replacement part for these model...
View full details
WHEEL HUBS, HEX (4) Set of four 12 mm hex wheel hubs Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton®
This is a replacement LaTrax 10 Tooth Pinion Gear, with set screw. This package also includes a small bracket and two mounting screws. Features:Fa...
View full details
This is a replacement Traxxas 9 Tooth LaTrax Pinion Gear, for use with the LaTrax 1/18 Desert Runner and 1/18 Teton. Features:Factory Replacement G...
View full details
This is the Traxxas 14T Pinion Gear and Set Screw for the LaTrax Rally Car.Features: Silver/grey colored Made of steel For the LaTrax Rally Car I...
View full details
This is a pair of Traxxas Pinion Gear Differentials for the LaTrax Rally Car.Features: Black colored Made of plastic For the LaTrax Rally Car Inc...
View full details
This is a replacement LaTrax Camber Links & Toe Link Set. Package includes six links that can be used in the front or rear camber link position...
View full details
Traxxas package of four each shock pistons and travel limiters for the Traxxas Rally VXL. Red plastic shock pistons with 2 x.5mm holes. Back plasti...
View full details
Cush drive key/ pin/ elastomer damper Cush drive key includes pin and elastomer damper Replacement part for these models: E-Revo® VXL Brushless ...
View full details
TRA6464 Housing, cush drive (front & rear halves)
Traxxas motor mount hinge post for the E-Revo. Constructed of black nylon. This package includes one each of the following, motor mount hinge post,...
View full details
This is the Differential Coverfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Nylon constructionBlack in colorINCLUDES:One Differential Cover
FEATURES: Nylon construction Black in color INCLUDES: Four Nylon Rear Stub Axle Spacers
FEATURES: Nylon construction Black in color INCLUDES: One Left Steering Servo Mount One Right Steering Servo Mount
This is the suspension multi-tool for Traxxas Revo. It is used to adjust the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen t...
View full details
TRA5459 Revo T-Maxx Rubber Driveshaft Boots(2) Boots, driveshaft (rubber) (2) Replacement part for these models: E-Revo Brushless E-Revo Revo T-Maxx
This is the optional heavy-duty servo saver spring for the Traxxas Revo.Features: Steel construction Chrome Plated Conical Shape Includes: One He...
View full details
This is a set of four Traxxas Cush-Drive Elements for the T-Maxx with TRX 2.5 Engine and other vehicles using the EZ-Start 2 Electric Starting Syst...
View full details
Traxxas end cap and O-ring for the carburetor is constructed of aluminum, O-ring is rubber. This end cap threads into the carburetor body on the op...
View full details
Nuts, 2.5mm nylon locking (12) Set of twelve 2.5 mm nylon locking nuts. Replacement part for these models: E-Revo® VXL Brushless Jato® Revo® Sla...
View full details
Traxxas package of replacement cover plates and seals are constructed of black plastic. These are used on the Revo 3.3 equipped with the forward on...
View full details
These are the Aluminum Front Wheel Spacersfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Aluminum ConstructionSilver in ColorINCLUDES:Four Alumi...
View full details
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full details
Traxxas Bellcrank Bushing 4x7x2.5mm Jato (4) Features: Nylon construction White in color Includes: Four 4mm x 7mm x 2.5mm White Plastic Bushing...
View full details
his is the Traxxas fuel bottle rebuild kit.Features: Clear plastic bottle lid Black rubber dispensing fuel cap Includes: One fuel bottle lid and ...
View full details
TRA4978 Screws, 3x21mm button-head machine (hex drive)
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS