This is the Traxxas Anodized Aluminum Antenna Crimp Nut. This Antenna Crimp Nut is red colored and compatible with the Traxxas Slash 4x4, Stampede ...
View full details
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
This is the Rear Bumperfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Plastic constructionBlack in colorINCLUDES:One Rear Bumper.
Traxxas Flat Wrench 8mm Blue Revo Features: Aluminum Construction Blue anodization Etched "Traxxas" and "8mm" logos Drilled hole on one end of ea...
View full details
Traxxas flat, open-end 5mm wrench for the Revo. Traxxas flat, open-end 5mm wrench for the Revo is constructed of aluminum. with blue anodization. E...
View full details
These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...
View full details
This is the Brake Yoke w/Pins for the Traxxas Revo.It is use on the Center/Front Driveshaft Assembly.FEATURES:Plastic Brake YokeSteel Brake Pins(ea...
View full details
This is a pair of replacement drive yokes for the Traxxas Revo. These yokes attach to the half shaft assemblies.Features: Black plastic constructio...
View full details
Traxxas Gear Center Differential Revo Features: Nylon construction Includes: Gear, two ring seals, gasket and instruction sheet Fits: Traxxas ...
View full details
FEATURES: Black plastic and steel wire construction INCLUDES: One ball link One straight linkage rod One coiled linkage rod One servo horn
This is the front and rear differential housing for the Revo from Traxxas.Features: Durable black nylon constructionIncludes: One diff housing (2 p...
View full details
This is the Transmission Input Shaft for the Traxxas Revo.FEATURES:Steel constructionBlack in colorINCLUDES:One input shaft, Part #5366SPECS:Length...
View full details
This is the small rod end set for the Traxxas Revo.Features: Plastic construction that’s black in color Metal Pivot Balls Includes: Six Rod Ends ...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
This is the steering linkage for the Traxxas Revo.Features: Connects between servo horns and steering armsIncludes: Two 3x30mm steel turnbuckles, f...
View full details
Linkage, Steering: Revo 3.3,SLY This is the Steering Linkage for the Traxxas Revo 3.3. Features Connects between servo horns and steering arms Incl...
View full details
Traxxas 5325R Servo Mount Throttle 4x10mm BCS (2) Revo Nitro Slayer This is the 4x10mm BCS Throttle Servo Mount from Traxxas.Features: Nylon const...
View full details
Guards,Steering Servo:Revo, Revo 3.3,SLY (2) These are the replacement Steering Servo Guards forthe Traxxas Nitro Revo Monster Truck. Features Nylo...
View full details
Traxxas 90º pressure fitting is constructed of polished aluminum and threaded at one end. This is the pressure fitting that is used on the Tuned Pi...
View full details
TRA5281 Control box battery cover w/ belt clip (EZ-Start 2)
TRA5245X Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)
Traxxas tune pipe coupler and exhaust deflector set for the Revo. Allows for a connection between the Exhaust Header and the Tune Pipe. Silicone co...
View full details
This is a replacement Idle Mixture Screw for theTraxxas TRX 2.5 Carb (TRAG5252).FEATURES:Pre-installed gasketINCLUDES:One NeedleSPECS:Length: 13.8 ...
View full details
Screw pins, 4x13mm (with threadlock) (4) Set of four 4x13 mm screw pins with hex-drive heads and threadlock Replacement part for these models: R...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
Ball bearings, blue rubber sealed (6x12x4mm) (2) Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full details
Ball bearings, blue rubber shield (5x10x4mm) (2) Pair of 5x10x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full details
TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)
These are the wheelie bar wheels for the Traxxas 3.3 T-Maxx.Features: Constructed of hard plastic Axles constructed of steel Includes: Four wheel...
View full details
TRA4965 Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
Bumper Mounts,FR & R:EMX,TMX,2.5,3.3 This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.These mounts attach the bum...
View full details
Traxxas throttle and brake servo mounts for the T-Maxx 3.3 is constructed of gray plastic. Includes: Two servo mounts Specs:Length: 1-3/8" (36mm)Wi...
View full details
Traxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts Specs:Length: 1-1/2" (38mm)Widt...
View full details
Traxxas optional 45T spur gear is constructed of black nylon. INCLUDES: One 45T spur gear. This is listed in the manual as the 1st gear.
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full details
Features:Painted whiteSteel construction Includes:Two springs Technical Specifications:Length: 3.11" (79mm)Inside diameter: .61" (15mm)Outside diam...
View full details
This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full details
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...
View full details
Differential gear (45-tooth)/ side cover plate & screws Replacement part for these models: Nitro Rustler® Nitro Slash
Exhaust tip, rubber (7mm i.d. for N. Stampede) (1) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® Pro .1...
View full details
