These are the GTR Shock Springs for use on theTraxxas 1/16 Slash VXL 4WD RTRFEATURES:Steel constructionRed in colorDouble green0.88 rateINCLUDES:Tw...
View full details
Features:Steel constructionRed in color0.82 rate, double orangeIncludes:Two GTR Shock SpringsRequires:Installation on the vehicleSpecifications:Len...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
This is a set of replacement Traxxas GTR shock caps with spring retainers, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo ve...
View full details
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
These are the rod ends for the 1/16 scale Traxxas Revo and Slash series.Features: Black nylon constructionIncludes: Eight Nylon Rod Ends Eight Nyl...
View full details
These are the hollow balls for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black in colorIncludes: T...
View full details
This is the Seal Kit for the Traxxas 1/16 scale Receiver Boxused in the 1/16 scale E-Revo and Slash. Features Prevents moisture and dirt from enter...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
These are the Left and Right Steering Blocksused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, black in ...
View full details
This is the Traxxas Right/Left Rear Suspension Link Mount for the Traxxas Funny Car.Features: Black colored Plastic construction For the Traxxas F...
View full details
Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full details
This is a replacement Traxxas Rear Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. Features: Nylon Co...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknutRequires:...
View full details
This is the Suspension Pin Set for the Traxxas Slash 4X4. The hinge pins hold the suspension arms to the bulkheads.Features: Durable steel constru...
View full details
Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
This is the Center Driveshaft for the Traxxas 1/10 scale Telluride 4x4.FEATURES:Plastic construction, blue in colorINCLUDES:Center Driveshaft with ...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
This is the clear driveshaft cover for the Traxxas Stampede 4x4.Features: Constructed of clear plasticIncludes: One rear shaft coverRequires: Insta...
View full details
TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...
View full details
This is the Telemetry Expander Seal Kit for the Traxxas X-Maxx Monster Truck.FEATURES:Seals telemetry expander box and protects components from dir...
View full details
This is the Traxxas Battery Door for the TQi Transmitter.Features: Grey colored Made of plastic Fits two and four channel TQi transmitters Protect...
View full details
This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features: Plastic and metal construction Includes: (3) Different plasti...
View full details
This is the Input Shaft/ PinFor the Traxxas Cush drive outputFEATURES:Steel constructionINCLUDES:One input shaftOne pinCOMMENTS:This part is for th...
View full details
This is the 6425 Seal Kit/Receiver Box XO-1 from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models fo...
View full details
This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5923Part Number: 5923 / TRA5923FitsSlayerSlayer Pro
These are the Low CG Nerf Bars in Gray for the1/10 scale 2WD Traxxas Slash.FEATURES:Plastic construction, gray in colorFor use with the Low CG chas...
View full details
These are the Traxxas Blue Nerf Bars for the Low CG Chassis Conversion Kit on the Slash 2WD.Features: Blue colored Made of plastic For the Traxxas...
View full details
Traxxas 5833 Nerf Bars Low CG Black Traxxas Slash These are the Low CG Nerf Bars in Black for the 1/10 scale 2WD Traxxas Slash. FEATURESPlastic con...
View full details
Nerf bars, chassis (black) Pair of black chassis nerf bars Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Fo...
View full details
This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...
View full details
This is an optional Traxxas Single Motor Gear Cover, and is intended for use with the E-Revo model 5605. Traxxas makes it easy to convert from dual...
View full details
Traxxas 5677A Cover Gear 3x8mm CS Revo (1)This is the Gear Cover for the Traxxas Revo.FEATURESPlastic construction, black in colorFor the single mo...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the battery compartment vent for the Traxxas E-Revo.Features: Nylon construction that is black in color Fits left or right side Includes:...
View full details
Traxxas Seal Kit/Receiver Box Slash Features: Prevents moisture and dirt from entering receiver box Includes: Silicone rectangle shaped O-ring S...
View full details
Traxxas Brake Cam Jato Features: Aluminum construction Silver in color Includes: One Metal Brake Cam Fits: Traxxas Nitro Jato
This is an optional Traxxas Rear Suspension Hinge Pin Mount Set. These blocks feature different anti-squat angles which will alter the suspension c...
View full details
These are the rear left and right stub axle carriers for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInc...
View full details
This is the Fuel Tank Rebuild Kitfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Nylon, Rubber and Metal ConstructionBlue, Black, and Silver in C...
View full details
FEATURES: Nylon and Metal construction Black in color INCLUDES: One 3mm x 30mm Threaded Rod Two 3mm Ball Cups Two 3mm Hollow Balls One Nylon Steeri...
View full details
This is the steering drag link with screw for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorIncludes: One...
View full details
This is the shim set for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s silver in color adjusting roll centerIncludes: Fo...
View full details
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details