This is the Traxxas Ring gear, differential/ pinion gear, differential (metal). This is Traxxas part number 7683Part Number: 7683 / TRA7683FitsLaTr...
View full details
This is a pair of Wheels for the LaTrax Teton Monster Truck from Traxxas.FEATURES:Plastic construction, black in colorINCLUDES:Two Wheels for the L...
View full details
These are the LaTrax slick tires by Traxxas.Features: Made of black rubberIncludes: Two tiresSpecs:Inner Diameter: 34mm (1.33")Outer Diameter: 43mm...
View full details
This is a replacement LaTrax Aluminum Center Driveshaft. This package also includes one driveshaft pin. Features: Aluminum Construction Light Wei...
View full details
Bulkhead, front & rear / differential housing, front & rear Front and rear bulkheads with front and rear differential housing covers Repl...
View full details
This is a replacement LaTrax Front & Rear Body Mount Set. Package includes the plastic front and rear body mount components. Features: Factor...
View full details
This is a pack of two replacement Traxxas Green Wheels, and are intended for use with the Traxxas 1/10 Rally Racer. These wheels can be used ...
View full details
This is the Traxxas Front Skidplate for the 1/10 scale Rally VXL.Features: Black colored Made of plastic For the Traxxas Rally VXL Includes:One T...
View full details
BULKHEAD, REAR Rear bulkhead for vehicles equipped with the low-CG 4X4 chassis. Does not fit standard chassis. For a complete chassis conversion, ...
View full details
These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...
View full details
These are the front and rear toe links for the Traxxas Grave Digger off-road truck.Features: Molded composite plastic construction that is green in...
View full details
These are the front and rear toe links for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that is red in colorIncludes: F...
View full details
This is the white wing and decal sheet for the 1/16 Traxxas E-Revo and E-Revo VXL. Features: Nylon construction White in color Includes: (...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
This is a set of four Traxxas Molded Composite Push Rods in Green with eight Hollow Balls. Note:Fits the following models:1/16 E-Revo VXL1/16 E-Rev...
View full details
These are the pushrods and hollow balls for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Molded composite construction that’s red in colorI...
View full details
TRA7097 Owner's manual, 1/16 Slash 4WD (model 7005)
These are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full details
Traxxas half shafts for use on the 1/16 Slash VXL and Brushed Vehicles. Constructed of black nylon. Fits left or right. This package includes; Two ...
View full details
This is a set of replacement Traxxas molded composite toe links, and are intended for use with the Traxxas 1/16 Slash. Features: Plastic In...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
Bulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1) Left and right front bulkhead halves with 3x10 mm screws (4) Replaceme...
View full details
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
This is a pair of Traxxas Aluminum Front/Rear Bulkhead Tie Bars in Blue with a 2.5x6mm Cap Screw for the 1/16 Scale Slash 4WD, E-Revo, E-Revo VXL, ...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
Stub axles, rear, heavy duty (2)/pins (2) Pair of rear heavy-duty stub axles with pins (2) Replacement part for these models: Ford Fiesta® ST Ra...
View full details
SHOCK TOWER, FRONT Replacement front shock tower Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Rally Slash 4X4 Ultim...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One rear shock towerRequires:Installation on chassisTechnical Specifications:Length: 8...
View full details
This is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full details
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
This is a replacement Traxxas Wheelie Bar Mount/Rear Skidplate Set, and is intended for use with the Traxxas Stampede 4X4. Features: Factory Repla...
View full details
Traxxas Half Shaft Internal Splined XO-1 Features: Hardened steel construction Includes: Internal Splined Half Shaft Fits: Traxxas XO-1 Traxxa...
View full details
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details
This is the stock Battery Hold Down for the Traxxas Stampede 4x4 VXL. Features Composite constructionHolds stock 7-cell battery supplied with vehic...
View full details
GEAR, 34-T PINION (1.0 METRIC PITCH), FITS 5MM SHAFT
Features:Dense foam absorbs minor impactsIncludes:Foam Front Bumper for the Traxxas XO-1Specifications:Width: 10.1" (258mm)Thickness: 0.98" (25mm)
This is the Splitter Extension for the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Molded plastic constructionINCLUDES:Splitter Extension with two ...
View full details
These are the red shock springs for the Traxxas Slayer.Features: 2.3 lb/in tension Red coating Includes: Two Shock SpringsRequires: Assembly onto...
View full details
These are the GTR red shock springs for the Traxxas Slayer.Features: 2.0 lb/in tension Red coating Includes: Two GTR Red Shock Springs for the Tr...
View full details
These are the Red Shock Springs for the Traxxas Slayer. Features 1.8 lb/in tensionRed coating Includes Two Shock Springs Requires Assembly onto the...
View full details
This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit.FEATURES: Plastic construction, gray in color ...
View full details
This is the Blue Lower Chassis for use with the Low CG Conversion Kit. Features: Plastic construction Blue in color Fastens under front section...
View full details
Lower chassis, low CG (black) Change up the color on your low-CG-equipped 2WD Slash with this accessory lower chassis. Does not fit standard chass...
View full details
