Suspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full details
This is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full details
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right Includes: (...
View full details
This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...
View full details
This is the rear suspension arm set for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Nylon construction that is black in colorIncludes: Low...
View full details
Traxxas front suspension arm set for use on the 1/16 Slash VXL 4WD RTR. Constructed of black nylon. This package includes; One Upper Right Suspensi...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
This is the Sway Bar Wires Set for the Traxxas Slash 4x4FEATURES:Steel constructionBlack and silver for soft and hardINCLUDES:2 front sway bars2 re...
View full details
This is a pair of SCT Split Spoke Wheels in Black from Traxxas.FEATURES:Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slas...
View full details
This is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full details
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4) Set of two heavy-duty half shafts includes internal shaft...
View full details
These are the Traxxas Heavy Duty External and Internal Splined Half Shafts with metal U-Joints for the Telluride 4x4.Features: Black and silver/gr...
View full details
Traxxas External Splined Half Shaft. This is the male end half shaft that works with the CVD type driveshafts. Package includes one half shaft.
Half shaft, external splined (steel-spline constant velocity) (1) Replacement steel external-spline half shaft for Traxxas steel CV driveshafts (6...
View full details
This is the Telemetry Expander Mount that fits the 3622 or 3622A Chassis. Includes: (1) Mount
This is the Traxxas 35mm Flywheel with Magnet.Features: For Traxxas glow powered vehicles Magnet provides an RPM sensor to read RPM data Includes...
View full details
Traxxas Stub Axle Front 6mm XO-1 Features: Hardened steel construction 6mm diameter at axle pin area Includes: Two 6mm Front Stub Axles Fits: ...
View full details
This is a pair of Traxxas Steel Rear 6mm Splined CVD Stub Axles for the XO-1.
This is the rear bulkhead for the Traxxas XO-1 on-road car.Features: Molded plastic construction Holds rear suspension arm hinge pins in place In...
View full details
This is the Dual Profile Satin Chrome SCT Split Spoke Black Beadlock style wheels for the Slayer Pro from Traxxas. Features: Fits front and rea...
View full details
These are the front satin chrome wheels for the 2WD Traxxas Slash Short Course Racing Truck RTR.Features: Plastic construction with satin chrome f...
View full details
These are the Rear Satin Chrome Wheels for theTraxxas Slash Short Course Racing Truck RTR (TRAC43**).FEATURES:Plastic constructionSatin chrome fini...
View full details
Traxxas pair of front springs are constructed of white steel. Specs:Length: 59mm (2.3")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56...
View full details
Traxxas pair of rear springs are constructed of white steel. Specs: Length: 71mm (2.8")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56"...
View full details
Traxxas package of four 17mm hub retainers. This is the new hub retainer pin that is used on the new TRA5853X & TRA6856X 17mm wheel adapter ass...
View full details
Skidplates, front & rear (black) Black front and rear skid plates Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor ...
View full details
This is a replacement Traxxas LED Light Front Harness. This package includes four clear LED's, as well as three small zip ties to help with install...
View full details
Half Shaft Set, Long (Plastic Parts Only) (Internal Splined Half Shaft/ External Splined Half Shaft/ Rubber Boot) (Assembled w/ Glued Boot) (2 Asse...
View full details
These are the short half shafts for use on the Traxxas Summit Truck RTR.Features: Plastic construction that’s black in colorIncludes: Two Short Hal...
View full details
This is the front bumper and mount for the Traxxas Summit.Features: Black plastic with mounting hardwareIncludes: Front bumper and mountRequires: I...
View full details
These are the rear chrome wheels for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction Chrome plated Five spoke wheel pattern Uses...
View full details
Traxxas Rear Twin Spoke Wheel 2.8" Chrome Jato (2) Features: Nylon construction Chrome plated Five split spoke wheel pattern Uses 12mm hex adapte...
View full details
Slipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full details
Traxxas set of assembled left or right half shafts are direct replacement parts. Rubber sealed boots. Fully assembled Includes: Two assembled half ...
View full details
FEATURES: Metal construction Black in color INCLUDES: One Left Front Wheel Spindle One Right Front Wheel Spindle
Suspension Pin Set, Front & Rear: Jato This is the Front and Rear Suspension Pin Set for the Traxxas Jato. Features Constructed of steel, 1/16"...
View full details
TRA5467A Body, GTR shock (aluminum, blue-anodized) (1)
This is a replacement GTR shock body for the Traxxas Revo monster trucks. This is the stock shock body that comes in the kit.
This is a replacement opti-drive sensor assembly for the Traxxas Revo monster truck. This is the sensor that attaches to the transmission and deter...
View full details
This is the throttle & brake linkage set for the REVO from Traxxas.Includes: Throttle & brake linkage rods Springs Thumb nut Various other...
View full details
This is the rocker arm set progressive 3 (90-T) for the REVO from Traxxas.Features: Durable gray nylon constructionIncludes: An eight piece Rocker ...
View full details
Traxxas progressive-1 rocker arm set for the Revo. They are part of the suspension and act as a cantilever system for the Front & Rear Shocks. ...
View full details
This is a long travel rocker set for the Traxxas Revo.Features: Gray plastic construction Long Travel raised lettering on top of the rocker arms ...
View full details
Traxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...
View full details
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic) Skid plate set includes front and rear skid plates. Replacement pa...
View full details
TRA5334 Axle carriers, left & right (1 each)
Traxxas replacement right side electronics box for the Revo. Part attaches directly to the chassis. Black plastic. INCLUDED: One right electronics ...
View full details
