Traxxas transmission gear set for use on the 1/16 E-Revo and Slash VXL Vehicles. Nylon input and output gears. Steel idler gear. This package inclu...
View full details
Traxxas differential gear set for use on the 1/16 E-Revo and Slash VXL Vehicles. Constructed of steel. This package includes; Two Output GearsThree...
View full details
These are the SCT dual profile off-road tires for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Rubber construction Dual profile Includes: ...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full details
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles.Features: Plastic construction Allows installation and removal of the receiver wi...
View full details
Features:Metal and black plastic constructionAssembled, with ball joints Includes:Two upper suspension armsTwo lower suspension arms
This is the rear linkage sway bar set for the Slash 4x4 from Traxxas.Features: Nylon and steel constructionIncludes: Two Rod ends Two Ball studs T...
View full details
This is a replacement Traxxas Front Sway Bar Linkage Set, and is intended for use with the Traxxas Slash 4x4 1/10 scale truck. This set includes tw...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong an...
View full details
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The heavy-duty rear driveshaft comes ...
View full details
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The front heavy-duty driveshaft come...
View full details
This is the Traxxas Rear Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and st...
View full details
This is the Traxxas Front Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and s...
View full details
This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement work...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal...
View full details
These are the Traxxas Front/Rear Left/Right Suspension Arms for the Telluride 4x4.Features: Black colored Made of tough plastic Fits the front and...
View full details
This is the Traxxas Clockwise Motor with a High Output Red Connector for the Latrax Alias Quadcopter.Features: Color of connector indicates rotati...
View full details
TRA6585 Mounts, sound output module, Slash (front & rear)
This is the Traxxas Telemetry Expander Mount for the XO-1, E-Revo and Summit.Features: Made of durable material For the Traxxas XO-1, Traxxas E-Re...
View full details
This is the Traxxas Telemetry Expander Mount for the Slash, Stampede 4x4, and Rally.Features: Made of durable material For the Traxxas Slash, Trax...
View full details
This is the Traxxas Splitter Extension and Canards. These Splitter Extension and Canards are compatible with the Traxxas XO-1 Car.Features:Durable ...
View full details
This is a replacement Traxxas Front & Rear Body Mount Set, and is intended for use with the Traxxas X0-1.
Rear Bumper, Rear Brace: Slayer This is the Rear Bumper for theTraxxas Slayer Pro 4WD Short Course Nitro RTR Features Nylon constructionBlack in co...
View full details
This is the Front Bumper and Mount for the Traxxas Slayer Pro 4WD Short Course Nitro RTRFEATURES:Nylon constructionBlack in colorINCLUDES:One Front...
View full details
This is a replacement Pink Rear Bumper and Mount for the 2WD Traxxas Slash. Features: Nylon construction Pink in color Includes: (1) Rear ...
View full details
This is the rear bumper and mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck.Features: Nylon construction that is black in colorInclu...
View full details
This is a replacement Pink Front Bumper and Mount for the 2WD Traxxas Slash. Features: Nylon construction Pink in color Includes: (1) Fron...
View full details
This is the front bumper and mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck.Features: Nylon construction that is black in colorIncl...
View full details
This is an optional Traxxas Single Motor Motor Plate, and is intended for use with the Traxxas E-Revo model 5605. Traxxas makes it easy to convert ...
View full details
Traxxas motor plate is constructed of blue anodized aluminum. This part holds the motors onto the truck. Requires: Installation on the E-Revo truc...
View full details
This is the rear LED lights harness for use on the Traxxas Summit Truck RTR.Features: JST ConnectorIncludes: Rear Harness Six RED LED Lights Three...
View full details
This is a replacement Traxxas Half Shaft Joint Re-Build kit, intended for use with the Traxxas Summit Monster Truck. This kit contains the hardware...
View full details
This is the CV style stub axle for use on the Traxxas Summit Truck RTR.Features: Machined steel construction that’s CV styleIncludes: CV Style Stu...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the Traxxas Rear Chassis Brace for the E-Revo and Summit.Features: Blue colored Made of durable aluminum For the Traxxas E-Revo and Traxxa...
View full details
Traxxas single speed conversion is an optional part used to convert the 2-speed transmission to a single speed. 20/31T single speed primary gearThe...
View full details
Features: Black plastic constructed one inch wheelsIncludes: One assembled wheelie bar and four 4X6mm Button Cap ScrewsRequires: The Jato model 551...
View full details
Traxxas differential gear is constructed of nylon and black in color. This package includes:One Differential Gear 38TOne Differential Side CoverOne...
View full details
These are the rear left and right suspension arms for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInclud...
View full details
These are the front left and right suspension arms for the Traxxas Nitro Jato Stadium truck.Features: Nylon construction that’s black in colorInclu...
View full details
Traxxas Front Upper & Lower Bulkheads Jato Features: Nylon Construction Black in Color Includes: One Front Upper Bulkhead One Front Lower Bu...
View full details
This is a package of Threaded Ball Studs fromTraxxas for use on the Jato 2.5.These are used for the inner camber link mounting.FEATURES:Hard anodiz...
View full details
FEATURES: Nylon construction Black in color INCLUDES: One Left Dirt Guard One Right Dirt Guard
This is the chassis top plate for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in color and holds receiver and th...
View full details
This is a Traxxas Hard-Anodized PTFE-Coated Aluminum GTR Shock Body. Hard-anodized and PTFE-coated aluminum shock bodies reduce internal friction f...
View full details
This is a pair of shock shafts for the Revo type GTR shocks from Traxxas.Features: Constructed of steel and threaded on both ends TiN coated for s...
View full details
This is the wing mount for the Traxxas Revo 3.3.Features: Nylon construction that’s black in colorIncludes: Two Wing Supports Wing Mount Four 4mm ...
View full details
