RPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. ...
View full details
If you’???re anything like we are, keeping track of which offset wheel you have lying around for your Traxxas Slash 2wd or Nitro Slash and whether ...
View full details
Description RPM¶ôǨSC10, SC10B & T4 A-arms were designed to solve critical durability issues stemming from stock rear A-arms. Our SC10, SC10B &a...
View full details
This is a set of twelve RPM 4-40 Long Shank Rod Ends. Shorter turnbuckles need long shank rod ends to compensate for the lack of turnbuckle length....
View full details
Description Stock bearings and axle carriers aren’t strong enough to handle the punishment T-Maxx, E-Maxx & MGT owners dish out. In addition, m...
View full details
Description RPM rear skid plates for the Traxxas Slash 2wd are designed to eliminate the frustration of broken skid plates and chassis. When a stoc...
View full details
This is the Shock Mount Lower and Wire RetainerFor the Traxxas Funny CarsFEATURES:Black plasticINCLUDES:One shock mountOne wire retainerCOMMENTS:Th...
View full details
FEATURES: Metal construction, red colored INCLUDES: Two shock springs COMMENTS: This spring as a rate of 0.82 and a triple orange compression.
This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas 1/8 Scale Funny Car. This set includes the necessary ...
View full details
VTR237004 5mm x 10mm x 4mm Ball Bearing (2)
This is the Traxxas Upper Chassis (Long) Battery Hold Down for the 1/18 scale LaTrax Desert PreRunner. Featrues: Molded in blue durable plasticRepl...
View full details
This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
This is the Green Body for the Latrax Rally Car from Traxxas, TRAD90GG.FEATURES:Molded polycarbonate constructionTrimmed and painted with green, wh...
View full details
This is the front bumper and mount for the Traxxas 1/16 scale Rally VXL.Features: Black plastic constructionIncludes: One Mount and BumperRequires:...
View full details
TRA7186 LED lights, light harness (4 clear, 4 red)/ bumpers, front & rear/ wire ties (3) (requires power supply #7286)
Traxxas front and rear bumpers for use on the 1/16 E-Revo VXL 4WD RTR. Plastic construction. Black chrome plated.Requires: Installation on the vehicle
This is the Input and Output Shafts for use on 16th scale Traxxas. Features: Steel construction Black in color Includes: (1) Input Shaft (...
View full details
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
This is the Traxxas Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw. This is Traxxas part number 7040Part Number: 7040 / TRA7040Fits1/16 E-Rev...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.
This is the Front Tie Bar in Aluminum for the Traxxas NHRA Funny Car, TRAD69**.FEATURES:Titanium anodized aluminum constructionINCLUDES:Front Tie B...
View full details
Traxxas pair of SCT Split Spoke Wheels in Red. Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash. Red colored wheel with...
View full details
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...
View full details
This is a replacement pair of Traxxas Pre-Mounted Rear Tires and are intended for use with the Traxxas XO-1. The tires come assembled and glued on ...
View full details
This is a replacement Traxxas Aluminum Front Shock Tower, and is intended for use with the Traxxas X0-1.
This is a pair of steering blocks for the Traxxas XO-1.Features: Aluminum construction that is anodized and blue in colorIncludes: One each Left an...
View full details
These are Traxxas Tire Wheel Assembled Glue SCT Split-Spoke Black.Features: Fits the rear of 2WD short course trucks and the front and rear of 4WD...
View full details
Traxxas pair of front springs are constructed of white steel. Specs:Length: 59mm (2.3")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56...
View full details
This is the optional Two Speed Conversion Kit for the Traxxas E-Revo, TRAC07**. **This conversion kit requires a 3-channel transmitter to shift gea...
View full details
Bulkhead, Rear (Left & Right Halves) for Summit Replacement Part For: Summit (Model# 56076-4)
This is the front bulkhead for use on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes: One Front Bulkhead ...
View full details
This is the Mamba ESC mounting plate from Traxxas.Features: Nylon construction that’s black in colorIncludes: ESC Mounting Plate Two 3x35mm Cap He...
View full details
These are front All-Star chrome front 2.8 wheels for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction Chrome plated Five spoke wh...
View full details
This is a pair of Traxxas "Alias" rear tires with foam inserts. Whether racing on a track or tearing across a back lot, the rear Alias tires are th...
View full details
This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Sl...
View full details
Traxxas engine mount and hardware is constructed of metal and silver in color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x...
View full details
These are the left and right 25 degree aluminum steering blocks for the Traxxas Nitro Jato Stadium Truck.Features: Aluminum construction in natural...
View full details
These are the rear left and right suspension arms for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInclud...
View full details
Traxxas left and right caster and steering blocks are constructed of nylon and black in color INCLUDES: One Left and Right 30 Caster Blocks One Lef...
View full details
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
Traxxas optional Wheelie Bar Mount for all versions of the Traxxas Revo. Constructed of black hardened plastic. Installs at rear of chassis to hold...
View full details
Traxxas rubber shock boots have rubber construction, blue in color and flexible material. Includes: Two Blue rubber Shock Boots and Two black Plast...
View full details
