TRA4881 DIFF FLANGED SIDE
TRAXXAS
This is the Differential Pulley and Side Cover for the Traxxas Nitro 4-Tec.FEATURES:Plastic constructionBlack in colorINCLUDES:One differential pul...
View full details
This is the Differential Pulley and Side Cover for the Traxxas Nitro 4-Tec.FEATURES:Plastic constructionBlack in colorINCLUDES:One differential pul...
View full details
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
This is the center driveshaft for the Latrax SST Stadium Truck.Features: Aluminum constructionIncludes: Center Driveshaft 1.5 x 8mm Steel Pin
These are the pivot balls and pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Steel constructed pivot balls wit...
View full details
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
This is an optional Traxxas Hardened Steel Front Drive Hub, and is intended for use with the Traxxas Slash 4x4 and other Traxxas vehicles. Includes...
View full details
This is the optional clear gear cover for use on the Traxxas Slash 4x4.Features: Plastic construction that is clear in colorIncludes: One Clear Gea...
View full details
Cover, gear/ motor wire hold-down clip Replacement gear cover with motor wire hold-down clip Replacement part for these models: Ford® F-150® Rap...
View full details
These are the Battery Cups for the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Molded plastic constructionINCLUDES:Two Battery Cup Sections
This is the a replacement Brake Cam Lever for the Traxxas Jato. Features: Nylon construction Black in color Includes: (1) Brake Came Lever...
View full details
This is a set of four Traxxas Suspension Down Stop Screws with a 2.5mm Drill Bit for the Jato. All R/C off-road racers want as much ground clearanc...
View full details
This is the Steering Bellcrank Postfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Metal constructionINCLUDES:Two Bellcrank Steering Posts
These are the front bumper for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that is black in colorIncludes: One Front Bumper
Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only) Replacement front and rear center half shafts (plastic parts...
View full details
This is package of Center Front and Rear Half Shafts for the Traxxas Revo.These parts install between the transmission and differentials.FEATURES:B...
View full details
FEATURES: Aluminum brake cam construction Plastic brake sleeve construction INCLUDES: One brake cam Part #5388 One plastic sleeve Part #5388 SPECS:...
View full details
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW Replacement differential carrier includes X-ring gaskets (2), ring gear g...
View full details
This is the steel suspension pin set for the Traxxas Revo. They are also commonly known as hinge pins.Features: Steel construction with a polished ...
View full details
This is a replacement flywheel nut from Traxxas.Features: Metal construction Used on the Traxxas TRX 2.5. engine Includes: Flywheel Nut
Traxxas optional aluminum brake adapter for the T-Maxx monster truck.; Features blue aluminum construction.; This is to be used with the heavy duty...
View full details
This is the Brake Adapter for the Traxxas T-Maxx 4WD RTR Monster Truck.This adapter fits in the center of the brake disc and fastensto the output y...
View full details
Traxxas battery box replaces damaged battery boxes. Constructed of gray plastic. This battery box mounts to the chassis and protects the battery pa...
View full details
This is the Battery Box for the Traxxas T-Maxx4WD Radio Control Monster Truck.This battery box mounts to the chassis and protects the battery packf...
View full details
This is a 10x19mm ball bearing from Traxxas. It is primarily for used in the 2-speed Spur Gear on the Traxxas T-Maxx.Features: Ball bearings reduc...
View full details
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
This is a stock replacement part for the Traxxas Nitro Rustler (not theelectric version).Features: Steel top gear shaft with preinstalled 16 tooth ...
View full details
This is the Traxxas throttle and brake rods for a slide carb.Features: Steel construction Black plastic servo horn Includes: Throttle and brake r...
View full details
This is the rubber exhaust pipe for the Traxxas Nitro Rustler.Includes: One rubber pipeFeatures: Durable black rubber constructionSpecs:Length: 3-5...
View full details
Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 6x10x0.5 TW Heavy-duty differential carrier with x-ring ga...
View full details
Cover, gear (upper & lower) (1)/ dust plug (1)/ 3x6mm CS (3) (for single motor installation, use with motor plate #3997X)
Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...
View full details
These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads.Feature...
View full details
Shock tower (rear) Replacement rear shock tower Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replic...
View full details
This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSk...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS