Products

Pushrod Set w/Ball Links: Super Timber 1.7m

The E-flite Eratix 3D SWS (Sport Wood Series) 1.6m (64”) is a larger version of the popular Eratix 3D FF (Flat Foamy) 860mm that features the benef...

Wing and Horizontal Tail Carbon Tubes: Super Timber 1.7m

Hands-Free Connector Assembly: Super Timber 1.7m

Servo Covers: Super Timber 1.7m

Battery Tray w/Straps: Super Timber 1.7m

LE Wing Slats: Super Timber 1.7m

Wing Slat Cover Clips: Super Timber 1.7m

Wing Lock Assembly w/Cover: Super Timber 1.7m

Float Landing Gear Wires: Super Timber 1.7m

Float Linkage Clips: Super Timber 1.7m

Water Rudder Linkage: Super Timber 1.7m

Inflatable Tire Air Pump w/Needle

Hubcaps, Locking Screws, Axle Spacers; Tundra Bead-Lock 120-150mm Tires

Tundra Bead-Lock Replacement Rubber Tire; 120mm-150mm

This Wing Set for the E-flite Viper 64mm EDF Jet includes left and right wing panels, left and right flaps, left and right ailerons, all hinges, (2...

This replacement part for the E-flite Viper 64mm EDF Jet includes a fuselage, Aileron and Flap servo leads routed and mounted to the Hands-free pla...

Horizontal Stabilizer with Elevators, (2) Elevator Control Horns with Ball Link Balls, and (2) Ball Link Securing Screws for E-flite Viper 64mm EDF...

Clear painted canopy, painted foam canopy structure, painted pilot and installed in the front seat, front and rear instrument panel decals installe...

Nose Cone with magnets installed in proper direction for E-flite Viper 64mm EDF Jet.In The Box (1) Nose Cone Magnets

Left and Right Winglets with navigation light lens with painted frame to match wing color scheme for E-flite Viper 64mm EDF Jet.In The Box (1) Left...

(2) Aileron Pushrods, (2) Flap Pushrods, (2) Elevator Pushrod, (1) Rudder Pushrod, (9) Pushrod Ball Links, (1) Nose Wheel Steering Pushrod, (1) Nos...

(2) Aileron Control Horns, (2) Flap Control Horns, (2) Elevator Control Horns, (1) Rudder Control Horn, (9) Ball Link Balls, (8) Ball Link Ball Sec...

In The Box (2) Main Wheels (1) Nose Wheel

(6) Wing securing screws, (3) Horizontal Stabilizer Securing Screws, (2) EDF Securing Screws, (4) Motor Mounting Screws, (1) EDF Rotor Cone Screw, ...

(2) Left and Right Ventral Fins for E-flite Viper 64mm EDF Jet.In The Box (1) Left Ventral Fin (1) Right Ventral Fin

Full set of decals for E-flite Viper 64mm EDF Jet.

Left (red) and right (green) wing tip LEDs with (2) Lens Covers Painted to match wing, (2) Left and Right Wing Landing LEDs (white) with leading ed...

Painted pilot for E-flite Viper 64mm EDF Jet.

Nose Gear Strut, Main Gear Strut Left, Main Gear Strut Right, (1) Nose Gear Steering Arm, (1) Nose Gear Steering Bearing, Nose Gear Strut Thumb Scr...

This Servo Arm Set for the E-flite Viper 64mm EDF Jet includes (2) Aileron Servo Arms, (1) Elevator Servo Arm, (1) Rudder Servo Arm, (1) Nose Wheel...

(1) Left Aileron Servo Cover, (1) Right Aileron Servo Cover, and (2) Flap Servo Covers for E-flite Viper 64mm EDF JetIn The Box (1) Left Aileron Se...

The E-flite Airbus A320neo Twin 64mm EDF is an officially licensed replica of one of the most popular airliners in the world today. It's packed wit...

The E-flite Airbus A320neo Twin 64mm EDF is an officially licensed replica of one of the most popular airliners in the world today. It's packed wit...

In The Box (1) Wing (Painted) (1) Foam Nacelle (R) (1) Foam Nacelle (L) (2) Air Inlets (2) Fiberglass Blade Spars (2) Linkage Balls (2) Control Hor...

In The Box (1) Fuselage (Painted) (2) Carbon Supports (1) Screw (1) Magnet (2) Mounting Plates (1) Nose Landing Gear Steering Shaft (1) Arm (1) Cow...

In The Box (1) Vertical Tail (1) Horizontal Tail (3) Control Horns (3) Mounting Plates (3) Screws (1) Fiberglass Blade

In The Box (2) Nose Wheel Pushrods (1) Rudder Pushrod (2) Elevator Pushrods (2) Aileron Pushrods (1) Nose Wheel Carbon Rod (5) Adjustable Ball Link...

In The Box (1) Cockpit (1) Hatch Cover (1) Carbon Support (1) Magnet (1) Pilot (1) Plastic Cover (1) Mounting Plate

In The Box (1) Nose Wheel (2) Main Wheels (3) Landing Gear Wires (3) Screw Nuts (3) Washers (3) Landing Gear Plastic Parts

In The Box(1) Decal Sheet

In The Box (5) Control Horns (5) Mounting Plates (5) Screws

In The Box (2) Motor Extensions (2) Servo Extensions

In The Box (1) Wing (painted) (2) Machine gun (2) Landing gear mountings (1) Wing mounting (2) Servo base (1) Fiberglass blade spar (1) Servo wire ...

In The Box (1) Wing (painted) (1) Machine gun (2) Landing gear mountings (1) Wing mounting (2) Servo base (1) Fiberglass blade spar (1) Servo wire ...

In The Box (1) Horizontal tail (painted) (1) Horizontal tail mounting (1) Horizontal tail joiner (1) Fiberglass blade spar (1) Wire joiner (1) Cont...

In The Box (1) Hatch cover (painted) (1) Plastic hatch "lip" (2) Plastic hatch grip (1) Magnet (1) Magnet holder