TRA6944 Servo Saver:NHRA
TRAXXAS
This is the Servo Saver for the Traxxas Funny Car. Features: Plastic construction Includes: (1) Servo Saver (1) Screw
This is the Servo Saver for the Traxxas Funny Car. Features: Plastic construction Includes: (1) Servo Saver (1) Screw
FEATURES: Metal construction, red colored INCLUDES: Two shock springs COMMENTS: This spring as a rate of 0.82 and a triple orange compression.
This is a pair of GTR Composite Shocks for the Traxxas NHRA Funny Car, TRAD69**FEATURES:Composite bodyAssembledINCLUDES:Two GTR Composite ShocksBot...
View full details
These are the two Wheels for the #6978 Wheelie Barused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, bla...
View full details
This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas 1/8 Scale Funny Car. This set includes the necessary ...
View full details
These are the Links, Rear Sway Bar (2) for theNHRA Funny Car Race Replica by Traxxas, TRAD69**.FEATURES:Metal and black plastic construction.INCLUD...
View full details
With the ProGraphix process, you will never see bleeding paint or over-sprays that need to be covered up with a page full of decals. Our unique Pro...
View full details
This is the Decal Sheet for use on theTraxxas 1/16 Slash VXL 4WD RTRFEATURES:Pressure sensitive, peel and stick vinyl decalsWindow, grille and ligh...
View full details
TRA7013X Decal sheets, 1/16 Slash 4WD team truck
Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full details
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series.FEATURES:Nylon and rubber constructionINCLUDES:Two Diff Gear CoversTwo L...
View full details
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.
These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
Ball bearings, blue rubber sealed (4x8x3mm) (8) Set of eight 4x8x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime ...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
This is a pair of Traxxas Aluminum Front/Rear Bulkhead Tie Bars in Blue with a 2.5x6mm Cap Screw for the 1/16 Scale Slash 4WD, E-Revo, E-Revo VXL, ...
View full details
This is a replacement Traxxas Front & Rear Steel Bulkhead Tie Bar Set, and is intended for use with the Traxxas 1/16 Grave Digger Monster Jam R...
View full details
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles.Features: Plastic construction Allows installation and removal of the receiver wi...
View full details
This is the Seal Kit for the Traxxas 1/16 scale Receiver Boxused in the 1/16 scale E-Revo and Slash. Features Prevents moisture and dirt from enter...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
These are the hollow balls for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black in colorIncludes: T...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
Bulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1) Left and right front bulkhead halves with 3x10 mm screws (4) Replaceme...
View full details
Traxxas front suspension arm set for use on the 1/16 Slash VXL 4WD RTR. Constructed of black nylon. This package includes; One Upper Right Suspensi...
View full details
This is the rear suspension arm set for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Nylon construction that is black in colorIncludes: Low...
View full details
These are the pivot balls and pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Steel constructed pivot balls wit...
View full details
These are the optional pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Hard anodized aluminum Replaces stock p...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS