TRA4612 Ball bearings (10x15x4mm) (2)
TRAXXAS
This is a pair of ball bearings by Traxxas. Ball Bearings help to reduce friction on your vehicle.Features: Stainless steel construction that’s sil...
View full details
This is a pair of ball bearings by Traxxas. Ball Bearings help to reduce friction on your vehicle.Features: Stainless steel construction that’s sil...
View full details
Traxxas replacement set of 6x12x4mm ball bearings replace worn bearings and are constructed of steel. INCLUDES: Two 6x12x4mm ball bearings for the ...
View full details
Traxxas slipper clutch set For Traxxas Vehicles which Do Not currently have the Slipper Clutch Set or Need the Current Slipper Replaced. INCLUDED: ...
View full details
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
This is a replacement slipper press plate for the Traxxas Rad2, Hawk2, Nitro Hawk, Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.Inclu...
View full details
This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
These are optional big bore red shock springs for the Traxxas E-Maxx truck.Features: 2.5 lb/in tension Red coating Includes: Two Shock SpringsReq...
View full details
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full details
This is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full details
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
This is a 48-pitch 84-tooth spur gear from Traxxas. The gear is molded from black plastic. This spur gear is for use with Traxxas' slipper clutch.I...
View full details
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) 86-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
This is a 48 pitch nylon spur gear used on the Traxxas Pro-Series transmission, such as the tranny used in the TRX-1.Features: Spur is made of nyl...
View full details
Traxxas 48P Spur Gear (90T) Features: 48 pitch 90 tooth Designed for models with a slipper clutch Black plastic construction Includes: One spur...
View full details
This gear is a steel pinion gear in 48 pitch.Features: Steel pinion gearIncludes: 1 gear and 1 set screwSpecs:Pitch: 48Tooth: 25Shaft length: 3/16S...
View full details
This is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full details
This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full details
This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full details
This is a set of two Traxxas Pro-Trax 2.2 Rear Buggy Tires with Inserts. These tires feature a spiked tread design, and soft compound rubber constr...
View full details
Traxxas Pro .15 to TRX 2.5 engine conversion has a tune Pipe, bellcrank, & Throttle Servo Horn made of plastic. Linkage wire made of steel. Spe...
View full details
FEATURES: Steel Construction INCLUDES: One Gear REQUIRES: Traxxas Clutch Bell SPECS: Length: 6 mm (0.243") Diameter: 17 mm (0.675") Teeth: 15
Traxxas Clutch Gear 2nd Speed 19T Features: Steel Construction Includes: One 19 Tooth Gear Specs: # Teeth: 19T Part Compatibility: Traxxas ...
View full details
FEATURES: Black nylon construction INCLUDES: One left chassis stiffener One right chassis stiffener REQUIRES: Installation onto vehicle. SPECS: Lef...
View full details
Bearing block, front (supports front shaft)/belt tension adjustment shims (front/ middle)/ screws
Traxxas tie-rods and upper camber rods are constructed of steel. Includes: Four Turnbuckles Two Draglinks. These turnbuckles are used on the steeri...
View full details
Traxxas left and right rear suspension arms are constructed of black plastic. Includes: Two suspension arms. Specs: Length: 62.0mm (2.443")Width: 3...
View full details
Driveshafts, telescopic (external-splined (2) & internal-splined (2))/ metal U-joints (4)
This is a package of 3X20mm Flat Head Countersunk Hex Screws by Traxxas.FEATURES:Flat head countersunk screw with a hexagon drive insertINCLUDES:Si...
View full details
Screws, 3x25mm countersunk machine (hex drive) (6)
CS 3x10 flathead (hex drive) Set of four 3x10 mm flat-head machine screws with hex drive heads Replacement part for these models: 4-Tec® 2.0 AWD...
View full details
Sold out
This is a Traxxas Engine Mount with Screws for the Nitro 4-Tec.Note:Compatible with the TRX 2.5R, TRX 3.3, and TRX Pro .15 engines
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS