TRA7668G Wheel nut washer, machined aluminum, green/3x12mm CS (4)
TRAXXAS
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
This is a set of four Traxxas Machined Aluminum Wheel Nut Washers in Red with four 3x12mm Cap Screws for the 1/18 scale LaTrax Desert PreRunner. Fe...
View full details
Traxxas 7668X Wheel Nut Washer Aluminum Orange 3x12mm CS (4) LaTrax Teton / SST These are the Wheel Nut Washers for the LaTrax Teton Monster Truck ...
View full details
WHEEL HUBS, HEX (4) Set of four 12 mm hex wheel hubs Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton®
Traxxas 7670 LaTrax Tires Teton (2)These are the Wheel Hub Hexes for theLaTrax Teton Monster Truck from Traxxas, TRAD76**.FEATURESComposite plastic...
View full details
This is a pair of Wheels for the LaTrax Teton Monster Truck from Traxxas.FEATURES:Plastic construction, black in colorINCLUDES:Two Wheels for the L...
View full details
These are the Traxxas Premounted Off-Road Monster Truck Tires on 5-Spoke Wheels for the LaTrax Teton Monster Truck.Features: Black colored Plastic...
View full details
This is a pair of Traxxas Pre-Assembled SCT Beadlock Style Dual-Profile Wheels in Blue and SCT Off-Road Racing Tires for the 1/18 scale LaTrax Dese...
View full details
This is a pair of Latrax SCT tires and wheels.Features: Plastic five spoke wheels that is orange in color Dual profile wheel design All terrain ti...
View full details
This is a pair of Traxxas Pre-Assembled SCT Beadlock Style Dual-Profile Wheels in Red and SCT Off-Road Racing Tires for the 1/18 scale LaTrax Deser...
View full details
This is the Traxxas Ring gear, differential/ pinion gear, differential (metal). This is Traxxas part number 7683Part Number: 7683 / TRA7683FitsLaTr...
View full details
Body reinforcement set (fits #7711 body) X-Maxx® body reinforcements provide added protection for your truck during extreme driving. These high-st...
View full details
This is the optional clear body for the Traxxas X-Maxx Monster Truck.Features: Molded from clear polycarbonate plastic Allows X-Maxx drivers to cr...
View full details
This is a Traxxas Rock n' Roll body that is painted with decals applied for the X-Maxx vehicle. This body comes assembled with tailgate protector.
This is a Traxxas Body X-Maxx ProGraphix Body Decal Sheet. Add some style to your Traxxas X-Maxx with this ProGraphix body and decal sheet. The gra...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
Traxxas X-Maxx Rear Body Support. Package includes replacement rear body support and hardware. Includes: Rear body Support (2) 3x15mm CS (2) 3x1...
View full details
Chassis top brace Replacement X-Maxx® chassis top brace Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2) F...
View full details
Mount, tie bar, front (1)/ rear (1) Front and rear tie bar mounts Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
This is a set of 4 Traxxas 3x18mm left and right (2 each) Battery Hold Down Mounts.Features: Molded composite plastic construction Fastens to chas...
View full details
This is a set of Traxxas Battery Hold Down and Foam Pads.Features: Molded composite plastic construction with thin foam strip to cushion battery H...
View full details
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full details
This is a pair of Traxxas Nerf Bars.Features: Molded composite plastic construction Fastens to each side of the chassis to help reduce damage from...
View full details
This is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full details
This is the Receiver Box Seal Kit for the Traxxas X-Maxx Monster Truck. Features: Replaces damaged or missing receiver box seal and cushions Si...
View full details
This is a set of Traxxas Steel upper and lower Tie Bars.Features: Steel construction Mounts upper and lower bulkhead halves in place Includes: On...
View full details
Bulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2)) Rear upper and lower X-Maxx...
View full details
This is a pair of upper suspension arms for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction for reduced weight F...
View full details
Traxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full details
This is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...
View full details
This is a set of left and right caster blocks for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Supports the d...
View full details
This is a Traxxas Rear bumper mount and support for the X-Maxx. Increase the overall rigidity and structural integrity of your vehicle with this re...
View full details
Bumper, front Front bumper Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full details
Shock tower, rear (left & right halves) Rear shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Shock tower, front (left & right halves) Front shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set) Hardened ste...
View full details
Features:Steel constructionFastens lower rear suspension arms to chassis Includes:Two 4x85mm Suspension Pins Specifications:Diameter: 0.16" (4mm)Le...
View full details
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
Suspension pin retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. Replacement part for these model...
View full details
This is a Traxxas front and rear Skidplate.Features: Molded composite plastic construction and reduces damage to underside of chassis and other com...
View full details
This is the Traxxas X-Maxx Replacement Center Skidplate.Features Molded composite plastic construction Reduces damage to underside of chassis and ...
View full details
This is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full details
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo) The stiffer heavy-duty servo saver spring and steel stee...
View full details
This is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS