TRA6937 Steering Blocks (Left&Right):NHRA
TRAXXAS
These are the Left and Right Steering Blocksused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, black in ...
View full details
These are the Left and Right Steering Blocksused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, black in ...
View full details
This is the Servo Saver for the Traxxas Funny Car. Features: Plastic construction Includes: (1) Servo Saver (1) Screw
FEATURES: Metal construction, red colored INCLUDES: Two shock springs COMMENTS: This spring as a rate of 0.82 and a triple orange compression.
This is a pair of GTR Composite Shocks for the Traxxas NHRA Funny Car, TRAD69**FEATURES:Composite bodyAssembledINCLUDES:Two GTR Composite ShocksBot...
View full details
These are the two Wheels for the #6978 Wheelie Barused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, bla...
View full details
This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas 1/8 Scale Funny Car. This set includes the necessary ...
View full details
These are the Links, Rear Sway Bar (2) for theNHRA Funny Car Race Replica by Traxxas, TRAD69**.FEATURES:Metal and black plastic construction.INCLUD...
View full details
With the ProGraphix process, you will never see bleeding paint or over-sprays that need to be covered up with a page full of decals. Our unique Pro...
View full details
This is the Decal Sheet for use on theTraxxas 1/16 Slash VXL 4WD RTRFEATURES:Pressure sensitive, peel and stick vinyl decalsWindow, grille and ligh...
View full details
TRA7013X Decal sheets, 1/16 Slash 4WD team truck
Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full details
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series.FEATURES:Nylon and rubber constructionINCLUDES:Two Diff Gear CoversTwo L...
View full details
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.
These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
Ball bearings, blue rubber sealed (4x8x3mm) (8) Set of eight 4x8x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime ...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4) Suspension pin set includes 2x46 mm (2) and 2x14 mm (4) suspension pins. Fits front or ...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
This is a pair of Traxxas Aluminum Front/Rear Bulkhead Tie Bars in Blue with a 2.5x6mm Cap Screw for the 1/16 Scale Slash 4WD, E-Revo, E-Revo VXL, ...
View full details
This is a replacement Traxxas Front & Rear Steel Bulkhead Tie Bar Set, and is intended for use with the Traxxas 1/16 Grave Digger Monster Jam R...
View full details
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles.Features: Plastic construction Allows installation and removal of the receiver wi...
View full details
This is the Seal Kit for the Traxxas 1/16 scale Receiver Boxused in the 1/16 scale E-Revo and Slash. Features Prevents moisture and dirt from enter...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
These are the hollow balls for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black in colorIncludes: T...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
This is the rear bulkhead for use on the Traxxas 1/16 E-Revo and Slash vehicles.Features: Nylon construction that’s black in colorIncludes: Two Re...
View full details
Bulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1) Left and right front bulkhead halves with 3x10 mm screws (4) Replaceme...
View full details
Traxxas front suspension arm set for use on the 1/16 Slash VXL 4WD RTR. Constructed of black nylon. This package includes; One Upper Right Suspensi...
View full details
This is the rear suspension arm set for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Nylon construction that is black in colorIncludes: Low...
View full details
These are the pivot balls and pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Steel constructed pivot balls wit...
View full details
These are the optional pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Hard anodized aluminum Replaces stock p...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full details
This is a set of replacement Traxxas molded composite toe links, and are intended for use with the Traxxas 1/16 Slash. Features: Plastic In...
View full details
Traxxas package of two front and rear toe links are constructed of green composite material. For the 1/16 Slash and E-Revo. Fits: Traxxas 1/16 Ral...
View full details
Traxxas optional toe links for use on the 1/16 Slash Vehicles. Constructed of anodized red aluminum. Traxxas aluminum toe links are manufactured fr...
View full details
This is the Traxxas Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw. This is Traxxas part number 7040Part Number: 7040 / TRA7040Fits1/16 E-Rev...
View full details
Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front...
View full details
Traxxas 48 Pitch Spur Gears are available in 45, 50 or 55 tooth count options to fine tune the gear ratio of your model. Fits: Traxxas 1/16 E-Revo...
View full details
Spur gear, 50-tooth 50-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Traxxas half shafts for use on the 1/16 Slash VXL and Brushed Vehicles. Constructed of black nylon. Fits left or right. This package includes; Two ...
View full details
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right Includes: (...
View full details
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation.The U-joint pins are held captive by a h...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS