TRA6745 Gear, 9-T pinion (32-p) (mach. steel)/ set screw
TRAXXAS
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
Half shaft, external splined (steel-spline constant velocity) (1) Replacement steel external-spline half shaft for Traxxas steel CV driveshafts (6...
View full details
Traxxas Half Shaft Internal Splined XO-1 Features: Hardened steel construction Includes: Internal Splined Half Shaft Fits: Traxxas XO-1 Traxxa...
View full details
Traxxas External Splined Half Shaft. This is the male end half shaft that works with the CVD type driveshafts. Package includes one half shaft.
This is a replacement Traxxas Rear Stub Axle, and is intended for use with the Traxxas Slash 4x4, Slash 4x4 Ultimate, Rally and Slash equipped with...
View full details
Stub axle, front, steel-splined constant velocity (1) Replacement steel front stub axle for Traxxas steel CV driveshafts (6851R). Accessory part ...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal...
View full details
This is the Center Driveshaft for the Traxxas 1/10 scale Telluride 4x4.FEATURES:Plastic construction, blue in colorINCLUDES:Center Driveshaft with ...
View full details
TRA6757 Rebuild kit, steel-splined constant-velocity driveshafts
This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement work...
View full details
These are the Traxxas Heavy Duty External and Internal Splined Half Shafts with metal U-Joints for the Telluride 4x4.Features: Black and silver/gr...
View full details
This is the Traxxas Front Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and s...
View full details
This is the Traxxas Rear Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and st...
View full details
This is a replacement Traxxas Center Driveshaft in blue anodized aluminum. Features: Blue Anodized Finish Aluminum Construction Light Weight Incl...
View full details
This is an optional Traxxas Rustler 4X4 Aluminum Center Driveshaft, intended for use with the 4x4 and 4x4 VXL Rustler and Hoss kits. This drivesha...
View full details
Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)Accessory part for these models:Rustler 4X4 VXLRustler 4X4
This is the Traxxas Complete High Stall Clutch Gear for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and steel ...
View full details
This is a pair of Traxxas Talon EXT 2.8" Tires with Foam Inserts.
These are the Traxxas Maxx 2.8 Tires with Foam Inserts for the Stampede 4x4.Features: Black colored Made of tough material V-shaped chevron tread ...
View full details
These are the Traxxas Maxx 2.8 Tires and Wheels with Foam Inserts for the Stampede 4x4. Features: Black and silver colored Made of tough material ...
View full details
These are the Traxxas Rustler 4x4 Black 2.8" Wheels (2). These feature a standard 12mm hex, making them compatible with many other Traxxas vehicles...
View full details
Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...
View full details
Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...
View full details
Wheelie bar The Rustler 4X4 wheelie bar helps prevent backflips under full-throttle acceleration. Replacement part for these models: Rustler® 4X...
View full details
This is a replacement Traxxas Wheelie Bar Mount/Rear Skidplate Set, and is intended for use with the Traxxas Stampede 4X4. Features: Factory Repla...
View full details
This is the replacement Traxxas Rear Ring and Pinion Gear for the Stampede 4x4. This set features a 12 tooth pinion and 47 tooth ring gear, and is ...
View full details
Differential kit, center (complete) (aluminum carrier) Replace your Traxxas vehicle’s stock slipper clutch with this Pro-Built high-performance ce...
View full details
Traxxas Center differential, complete (fits Hoss 4X4 VXL)
This is the clear LED lightbar in chrome for the Traxxas Stampede 4x4 VXL.Features: Four clear LED lights in chrome finish plastic housingsIncludes...
View full details
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you ...
View full details
The Traxxas Slash 4x4 Pro-Built Rear Differential is a prebuilt replacement for Slash 4X4 Short Course Trucks. Traxxas Pro-Built parts allow you to...
View full details
Rustler 4X4 LED Light Kit Built Traxxas Tough™The Traxxas Rustler® 4X4 takes stadium truck performance to new heights. The all-new High-Output Off...
View full details
These are the decal sheets for the 1/10 scale 4x4 Traxxas Slash.Features: Full-color sponsor, body trim and Traxxas logos in various sizes Precut ...
View full details
Differential kit, center (complete) The optional center differential transfers power to the front and rear differentials independently for smooth ...
View full details
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Set of front and rear bulkhead tie bars with a brilliant blue anodized finish Repla...
View full details
This is the Traxxas set of Aluminum Anodized Front/Rear Bulkhead Tie Bars. These Front/Rear Bulkhead Tie Bars are red colored and compatible with t...
View full details
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (...
View full details
Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
This is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One left caster blockOne right caster blockRequires:Installation on SlashTechnical Spe...
View full details
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4...
View full details
This is a pair of Traxxas Aluminum Left/Right Caster Blocks (C-Hubs) in Green. Fits the following models:Ford Fiesta ST RallySlash 4X4 PlatinumSla...
View full details
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS