TRA4460 Engine mount, 2 piece, aluminum (w/ screws) (N. Rustler/Sport)
TRAXXAS
Traxxas aluminum engine mounting set is constructed of aluminum. Hex drives and Phillips drive. This set has all of hardware to assemble the engine...
View full details
Traxxas aluminum engine mounting set is constructed of aluminum. Hex drives and Phillips drive. This set has all of hardware to assemble the engine...
View full details
This is the Composite Brake Disc for the Traxxas Nitro Slash SC, TRAD77**.FEATURES:Replaces worn brake discsINCLUDES:Brake DiscSteel Adapter
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full details
Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
Traxxas replacement throttle and brake rod set has pre-bent wires ready for assembly. Features solid steel construction. The diameter of the wire i...
View full details
This is the Traxxas throttle and brake rods for a slide carb.Features: Steel construction Black plastic servo horn Includes: Throttle and brake r...
View full details
This is a stock replacement part for the Traxxas Nitro Rustler (not theelectric version).Features: Steel top gear shaft with preinstalled 16 tooth ...
View full details
This is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck.
FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm S...
View full details
Traxxas easy start Starting System for Nitro Vehicles using the Traxxas TRX and TRX PRO Engines such as NITRO SPORT, NITRO RUSTLER, NITRO STAMPEDE,...
View full details
Traxxas replacement gears and shafts for the EZ-Start System. Steel main gear. Nylon and nylon/metal gears. Metal gear shafts. INCLUDED: One 29T St...
View full details
Traxxas stock replacement EZ start motor has a pre-installed pinion. Positive end is identified. This motor is what turns the engine over in order ...
View full details
Connector, wiring harness (EZ-Start® and EZ-Start® 2) Replacement wiring harness for the 4570 EZ-Start® and 5270R EZ-Start® 2 system. Replacement...
View full details
Traxxas updated wire harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Extra...
View full details
This is the replacement EZ start control box for the Traxxas EZ Start. This is the box that attaches to the 6-Cell battery and controls the start o...
View full details
This is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full details
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector) Replacement...
View full details
TRA4583 EZ-Start 2 wiring harness (for Jato)
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full details
This is a pair of ball bearings by Traxxas. Ball Bearings help to reduce friction on your vehicle.Features: Stainless steel construction that’s sil...
View full details
Traxxas replacement set of 6x12x4mm ball bearings replace worn bearings and are constructed of steel. INCLUDES: Two 6x12x4mm ball bearings for the ...
View full details
Traxxas slipper clutch set For Traxxas Vehicles which Do Not currently have the Slipper Clutch Set or Need the Current Slipper Replaced. INCLUDED: ...
View full details
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
This is a replacement slipper press plate for the Traxxas Rad2, Hawk2, Nitro Hawk, Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.Inclu...
View full details
This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
These are optional big bore red shock springs for the Traxxas E-Maxx truck.Features: 2.5 lb/in tension Red coating Includes: Two Shock SpringsReq...
View full details
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full details
This is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full details
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
This is a 48-pitch 84-tooth spur gear from Traxxas. The gear is molded from black plastic. This spur gear is for use with Traxxas' slipper clutch.I...
View full details
These are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full details
Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) 86-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
This is a 48 pitch nylon spur gear used on the Traxxas Pro-Series transmission, such as the tranny used in the TRX-1.Features: Spur is made of nyl...
View full details
Traxxas 48P Spur Gear (90T) Features: 48 pitch 90 tooth Designed for models with a slipper clutch Black plastic construction Includes: One spur...
View full details
This gear is a steel pinion gear in 48 pitch.Features: Steel pinion gearIncludes: 1 gear and 1 set screwSpecs:Pitch: 48Tooth: 25Shaft length: 3/16S...
View full details
This is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full details
This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full details
This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full details
This is a set of two Traxxas Pro-Trax 2.2 Rear Buggy Tires with Inserts. These tires feature a spiked tread design, and soft compound rubber constr...
View full details
Traxxas Pro .15 to TRX 2.5 engine conversion has a tune Pipe, bellcrank, & Throttle Servo Horn made of plastic. Linkage wire made of steel. Spe...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS