TRA3994X SHAFT LIGHT OUTPUT/IDLE
TRAXXAS
Traxxas 3994X Shaft Low Idler Gear Shaft E-Maxx This is the Lightweight Output/Idler Gear Shaft for the Traxxas E-Maxx.This shaft is located in th...
View full details
Traxxas 3994X Shaft Low Idler Gear Shaft E-Maxx This is the Lightweight Output/Idler Gear Shaft for the Traxxas E-Maxx.This shaft is located in th...
View full details
This is a set of two optional aluminum idler gear shafts from Traxxas. These idler shafts support the idler gears inside the transmission.
These are the Replacement 20 Tooth Idler Gears for the Traxxas E-Maxx Truck.These gears are located in the gearbox.FEATURES:Plastic constructionINC...
View full details
This is the replacement 20-tooth idler gear and shaft for the Traxxas E-Maxx 4WD RTR.Features: Steel construction that’s gun metal in color Replac...
View full details
This is the optional single motor plate for the Traxxas E-Maxx 16.8V RTR.Features: Aluminum construction that is blue in color Designed for a clea...
View full details
Traxxas Traxxas Pro.15 w/o Ps, w/Long Crank
Overview The Pro.15 race engine offers a level of nitro performance excitement to satisfy demanding drivers, who believe you can never have too ...
View full details
Traxxas Traxxas Pro.15 Std Crank w/ P/Starter
6x10x12 Roller Clutch One-way starter bearing for the TRX® Pro.15 nitro engine Replacement part for these models: TRX® Pro .15
Gasket, back plate Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
4026 - Wrist pin/ G-spring retainer (wrist pin keeper) (1)
Brake support bracket/ brake band/ 3x25mm roundhead machine screw (1)/ 3x16mm cap hex screw Replacement part for these models: TRX® Pro .15 Marine
Gaskets, head (aluminum) (2) Replacement part for these models: TRX® Pro .15
Cylinder sleeve/ piston (w/ oil ring ) (matched set) Replacement part for these models: TRX® Pro .15
Wrist pin/ G-spring retainer (wrist pin keeper) (1) Replacement part for these models: TRX® Pro .15
Carburetor, Pro (complete, assembled for TRX Pro.15) (6.0mm bore) combine with cooling head (4032) to upgrade TRX .15 to Pro .15 performance. Repl...
View full details
Stud & nut, carburetor attachment Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
Needle screw, idle mixture Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
Dust boot, throttle Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
Spring, throttle return (2) (Nitro 4-Tec) Accessory part for these models: TRX® 2.5R TRX® 3.3 TRX® Pro .15 TRX® Pro .15 Marine
Spring, throttle return (2) (Revo) Replacement part for these models: Revo® Slayer® Pro 4X4 Accessory part for these models: TRX® 2.5R TRX® 3.3
O-ring set: for carb base/ air filter adapter/high-speed needle (2)/ low-speed spray bar (2) Replacement part for these models: TRX® Pro .15 TRX®...
View full details
Low-speed spray bar Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
High-speed needle valve & seat assembly (w/ securing nut) Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
Spring, throttle return (2) (Jato, T-Maxx 2.5R, 3.3) Replacement part for these models: Jato® T-Maxx® TRX® 2.5R Accessory part for these models:...
View full details
Air filter (complete with rubber base & foam insert) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® ...
View full details
Air filter (foam insert only) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® Pro .15 Marine
This lightweight and durable recoil starter is ideal for racing because it removes a considerable amount of weight over the complete EZ-Start syste...
View full details
Backplate (for recoil start engines) Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
Starter shaft Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® Pro .15 Marine
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Bumper (rear)/ battery box/ body clips (2), EZ-Start mount, 3x10CST (2) Replacement part for these models: Nitro Rustler®
Shock tower, rear Replacement part for these models: Nitro Rustler® Nitro Slash
Flywheel (N. Rustler/Sport/Stampede/T-Maxx/Revo/Jato/Slayer) Replacement part for these models: Nitro Rustler® Revo® T-Maxx® TRX® 2.5R TRX® 3.3 T...
View full details
This new, light weight, silver anodized machined aluminum flywheel is 40mm in diameter, perfect for using a starter box with the Revo & Slayer....
View full details
Adapter nut, clutch (not for use with IPS crankshafts) Replacement part for these models: TRX® 2.5R TRX® 3.3 TRX® Pro .15
Clutch shoes (2)/ spring (N. Rustler/N.Sport/N.Stampede) Replacement part for these models: Nitro Rustler® Nitro Slash TRX® 2.5R TRX® 3.3 TRX® Pr...
View full details
Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec) Replacement part for these models: Jato® Revo® Slayer® Pro 4X4 T-Maxx® TRX® 2.5R TRX® 3.3...
View full details
Nuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®
Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck. Accessory part for th...
View full details
Exhaust header Replacement part for these models: TRX® Pro .15
Exhaust hanger, metal Replacement part for these models: TRX® Pro .15
Exhaust tip, rubber (7mm i.d. for N. Stampede) (1) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® Pro .1...
View full details
Engine mount, 2 piece, aluminum (w/ screws) (N. Stampede) Replacement part for these models: TRX® 2.5R TRX® 3.3 TRX® Pro .15
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS