Filters
Accessories
Brand
Capacity
Component
Level
Model
Part Type
Parts Category
Sensored
Type
Voltage
ALL TRAXXAS
TRA7150 Half shafts, left or right (internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)
TRAXXAS
These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...
View full details
TRA7061 Shocks, GTR composite (assembled, without springs) (2)
TRAXXAS
This is the Traxxas pair of Composite GTR Shocks for the Traxxas Rally VXL.Features: Black in color Composite construction Fully assembled - with ...
View full details
TRA6869 Wheel adaptors, 12mm hex, 6061-T6 aluminum (blueanodized)
TRAXXAS
This is the Traxxas set of four 12mm Blue Anodized Aluminum Hex Wheel Adapters. With Traxxas’ new hex wheel adapters it’s now possible to add the s...
View full details
TRA6858 Springs, rear (white) (progressive rate) (2)
TRAXXAS
This is a pair of Rear Progressive Rate White Shock Springs forthe Traxxas Slash 4x4 Vehicles. Features White in colorSteel constructionProgressive...
View full details
TRA6760 Driveshaft assembly, front, heavy duty (1)
TRAXXAS
This is the Traxxas Front Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and s...
View full details
TRA6758 Differential output shaft
TRAXXAS
This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement work...
View full details
TRA6735 Bumper, front/ skidplate, front (black)
TRAXXAS
This is a replacement Traxxas Front Bumper/Skidplate Set, and is intended for use with the Traxxas Stampede 4X4. Features:Factory Replacement Set I...
View full details
TRA6733 Suspension arm guards, rear (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
TRAXXAS
This is the rear suspension arm guards for the Stampede and Slash 4x4.Features: Black plastic constructionIncludes: Two Rear suspension arm guards...
View full details
TRA6715 Body mount (1)/ body mount post (2) (front)
TRAXXAS
TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...
View full details
TRA6556 Mount, telemetry expander
TRAXXAS
This is the Traxxas Telemetry Expander Mount for the XO-1, E-Revo and Summit.Features: Made of durable material For the Traxxas XO-1, Traxxas E-Re...
View full details
TRA6555 Mount, telemetry expander (fits Slash 4X4, Stampede 4X4, Rally, Jato)
TRAXXAS
This is the Traxxas Telemetry Expander Mount for the Slash, Stampede 4x4, and Rally.Features: Made of durable material For the Traxxas Slash, Trax...
View full details
TRA6534 Telemetry trigger magnet holder/ magnet 5x2mm (1)
TRAXXAS
TRA6534 Telemetry trigger magnet holder/ magnet 5x2mm (1)
TRA5854 Hub retainer, 17mm hubs, M4 X 0.7 (4)
TRAXXAS
Traxxas package of four 17mm hub retainers. This is the new hub retainer pin that is used on the new TRA5853X & TRA6856X 17mm wheel adapter ass...
View full details
TRA5777 Stuffing tube (assembled with liner)
TRAXXAS
Traxxas Stuffing Tube (Assembled w/Liner) DCB M41Features:Holds propeller shaft/flex cable in placeMetal constructionIncludes:Stuffing Tube with Liner
TRA5668 Linkage, shift
TRAXXAS
Shift Linkage (Includes: Ball Collar, Spring, Ball Cup, Servo Horn, Linkage Wire)/ Shift Servo Mount/ 3x8mm BCS (2) Replacement Part For: Summit...
View full details
TRA5646 Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch)
TRAXXAS
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...
View full details
TRA5640 Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch)
TRAXXAS
Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw 14-tooth pinion gear (32-pitch) fits 5...
View full details
TRA5622X Chassis, E-Revo & Summit/ foam pad
TRAXXAS
This is the chassis for the Traxxas E-Revo 4WD Monster Truck RTR.Features: Nylon construction that’s grey in color Installed foam pads Also fits t...
View full details
TRA5543 Steering bellcranks/ servo saver/ servo saver spring/ steering support/ 4x7x2.5 PB (4)/ 5x0.8mm NL (1)
TRAXXAS
This is the steering bellcrank set for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s gray in colorIncludes: Left and Ri...
View full details
TRA5539X Turnbuckles, aluminum (red-anodized), camber links,58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and hollow balls)/ aluminum 5mm wrench (red-anodized)
TRAXXAS
Traxxas’ new aluminum turnbuckles make it possible for R/C hobbyists to dress up their Jato™ and save weight at the same time! These turnbuckles co...
View full details
TRA5460X Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/o springs) (4)
TRAXXAS
This is the Traxxas set of four Assembled Anodized GTR Shocks for the Traxxas Revo/E-Revo/Summit. Features: Fully assembled TiN coated shafts Hard...
View full details
TRA5458X Yokes, differential and transmission (2)/ 4x15mm screw pins (2)
TRAXXAS
These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...
View full details
TRA5396X Primary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/disc spring
TRAXXAS
Traxxas primary forward and reverse gears for the Traxxas T-Maxx 3.3. Gears are constructed of steel and plastic. This package includes;One Plasti...
View full details
TRA5383 Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input gears, hardware)
TRAXXAS
This is the optional two speed close ratio gear set for the Traxxas Revo. Only Revo offers the ability to custom tailor the 2-speed gear ratios for...
View full details
TRA5363X Fuel tank, 150cc (complete)
TRAXXAS
This is a 5.1oz (150cc) complete fuel tank from Traxxas. Holds and distributes the fuel to the carb.Features: Plastic construction Tight spring on...
View full details
TRA5360 Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)
TRAXXAS
TRA5360 Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)
TRA5338 Toe link, 5.0mm steel (front or rear) (2)
TRAXXAS
Toe link, 5.0mm steel (front or rear) (2) Pair of steel toe links fit front or rear. Rod ends sold separately. Replacement part for these models:...
View full details
TRA5325X Electronics box, left/ box cover
TRAXXAS
This is the Traxxas left electronics box for the Traxxas Revo 3.3.Features: Constructed of plastic Holds the high torque and micro servos for the ...
View full details
TRA5315 Guards, steering servo (2)
TRAXXAS
Guards,Steering Servo:Revo, Revo 3.3,SLY (2) These are the replacement Steering Servo Guards forthe Traxxas Nitro Revo Monster Truck. Features Nylo...
View full details
TRA5143 Turnbuckles, toe links (5.0mm steel) (rear) (2)
TRAXXAS
These are the rear turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Rear T...
View full details
TRA5141 Turnbuckles, toe links (5.0mm steel) (front) (2)
TRAXXAS
These are the front turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Front...
View full details
TRA4994X Forward only shaft and gear
TRAXXAS
This is a forward only shaft and gear for the Traxxas T-Maxx. This converts the T-Maxx to forward only.Features: Black and white in colorIncludes: ...
View full details
TRA4982 Diff gear set: 13-T output gear shafts (2)/ 13-T spider gears (2)/spider shaft (1)/ 6x10x0.5mm PTFE-coated washer (1)
TRAXXAS
Traxxas stock replacement differential gear set for the T-Maxx. Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be r...
View full details
TRA4962 Big Bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum)
TRAXXAS
This is the Traxxas set of X-Long Big Bore Shocks for the Traxxas T-Maxx. These shock bodies and shock caps are made of hard anodized, Teflon coate...
View full details
TRA4939 Suspension screw pin set (T-Maxx, E-Maxx)
TRAXXAS
These are the replacement hinge pin screws for the Traxxas T/E-Maxx. The hinge pins hold the suspension arms to the bulkheads.Features: Durable ste...
View full details
TRA4917R Shock tower (for rectangular body posts)
TRAXXAS
This is the shock tower for the all versions of the Traxxas T-Maxx. This is for rectangular body posts.Features: Plastic constructionIncludes: Shoc...
View full details
TRA4472R Spur gear, 72-tooth (0.8 metric pitch, compatible with 32-pitch)
TRAXXAS
Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
TRA4124 Clutch bell, (24-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
TRAXXAS
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
TRA4122 Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm
TRAXXAS
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
TRA3771A Tires & wheels, assembled, glued (2.8")(All-Star black chrome wheels, Ribbed tires, foam inserts) (electric front) (2)
TRAXXAS
TRA2662 BIG BORE SHOCKS(XX-LONG)
TRAXXAS
Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
TRA2660 Big Bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum)
TRAXXAS
Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2) Set of two long Big Bore shocks p...
View full details
TRA2596 Screws, 4x25mm button-head machine (hex drive) (6)
TRAXXAS
Screws, 4x25mm button-head machine (hex drive) (6)