TRA5118A Traxxas 8x16x5mm Ball Bearing (2) Black Rubber Sealed
TRAXXAS
Ball bearings, black rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Ball bearings, black rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Chassis conversion kit, TRX-4® (short to long wheelbase) (includes rear upper & lower suspension links, front & rear shock towers, long fe...
View full details
Replacement gear set for 2065A and 2065Tservos. Gears do not fit 2065 or 2065X servos. Replacement part for these models: 1/18 LaTrax® Desert Pr...
View full details
Suspension pins, outer, rear, 3.5x56.7mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2) Two 3.5x56.7 mm hardened steel outer rear suspension pins ...
View full details
TRA9579R Traxxas Ring gear, differential/ pinion gear, differential (machined) (front or rear)
Wheelie bar, assembled (red) (fits Slash, Bandit®, Rustler®, Stampede® series)The patented Traxxas adjustable wheelie bar features four-position ad...
View full details
This is an optional pack of four Traxxas Fender Extensions, intended for use with TRX-4 and TRX-6 Kits. Includes: (4) Fender extensions (24) 3x8...
View full details
Sold out
Body Clip Retainer Black Spartan (4) Traxxas Body Clip Retainer Set (Black) (4) Features: Rubber construction Includes: Four Black Body Clip Ret...
View full details
Wheel hubs, splined, 17mm (orange-anodized) (4)/ 4x5mm GS (4)/ 3x14mm pin (4) Set of four 17 mm orange-anodized aluminum wheel hubs combine high-...
View full details
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Red Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped with...
View full details
This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for for 2WD Slash, Stampede, and R...
View full details
Just like the heavy-duty suspension arms, X-Maxx roof skid plates use the toughest composite material. Whether you're sending it at the skate park,...
View full details
This is the replacement Rear Differential Ring Gear and Differential Pinion Gear for the Traxxas Maxx. Includes: (1) Differential Ring Gear (1)...
View full details
This is a replacement Traxxas Front Bumper Mount, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper ...
View full details
Driveshaft, center, 6061-T6 aluminum (green-anodized) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong a...
View full details
Gearbox halves (L&R) (grey) w/ idler gear shaft Gray gearbox halves (L&R) for Magnum 272 transmission. Includes idler gear shaft. Will not...
View full details
Accessory part for these models: Rustler©Bandit VXLBanditFord F-150 RaptorNitro SlashRustler© VXLSlash 2WD Unassembled KitSlash VXLSlash
Traxxas 39mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
Traxxas 49mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive Traxxas precision-ground, hardened-steel hex bits fit jus...
View full details
WideMaxx® Kit Ultimate Handling for Extreme Performance The Traxxas Maxx offers more power than ever before into a 1/10 scale monster truck plat...
View full details
This is the Traxxas TQi 2.4GHz 2-Channel Radio System. This TQi transmitter is compatible with the Traxxas Link Wireless Module (sold separately -Â ...
View full details
This is the Traxxas Rock n' Roll painted body with decals applied for the Stampede vehicle.
This is a replacement Traxxas Center Driveshaft in blue anodized aluminum. Features: Blue Anodized Finish Aluminum Construction Light Weight Incl...
View full details
Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware Replica spare tire for the TRX-4® 1979 Ford® Bronco body. Includes mount, ...
View full details
This is the Aluminum Hex Wheel Hubs for the Traxxas X-Maxx Monster Truck. Features: Replaces Stock Plastic Wheel Hexes Blue in Color Aluminum C...
View full details
Traxxas Paddle Tires let you tear up sand, snow - and even water! These 3.8" size paddles are pre-mounted on black wheels that will fit the E-Revo ...
View full details
This is a replacement Traxxas Unlimited Desert Racer Front Right Lower Suspension Arm, with included arm insert. This arm is only compatible on the...
View full details
Dual cooling fan kit (with shroud), Velineon 1200XL motor
Spur gear, 70-tooth 70-tooth spur gear (48-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear rat...
View full details
Turnbuckles (72mm) (Tie rods or optional rear camber rods) (2)
TRA6634 LaTrax Alias Quad Rotor Motor CW/CCW(4) Â This is a replacement LaTrax Alias Motor Set, which includes four pre-wired motors, two clockwise...
View full details
This is replacement Progressive Rear Shock Springs for the 2WD Slash. Features: Metal construction Pink in color  Includes: (2) Shock Sprin...
View full details
This is the pair of two Traxxas Front/Rear Aluminum Driveshaft Assembly for the LaTrax Rally Car.Features: Blue colored Made of Aluminum replaces ...
View full details
These are the Black and Silver Pivot Balls for the Latrax Rally, SST and Teton Vehicles. Features:Black and Silver Pivot Balls Includes: (6) Black...
View full details
This is a replacement Traxxas GTR Shock Cap & Spring Retainer Set. These parts are compatible with Traxxas GTR Long and XX-Long shocks (TRA7461...
View full details
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks) The 1/10 scale GTR ...
View full details
This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short...
View full details
These are the Front and Rear Body Mounts for theTraxxas Telluride 4x4 from Traxxas, TRAD91**.FEATURES:Constructed of plastic, black in colorINCLUDE...
View full details
Traxxas pair of shock springs for the 1/16 Summit with a blue spring rate. Spring,shock(GTR) for 1/16 Summit. Requires: Installation onto shocks Sp...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
This is a pair of Traxxas SCT Off-Road Racing Tires in S1 Compound with Foams Mounted and Glued on SCT Black Orange-Beadlock Dual-Profile Wheels fo...
View full details
Springs, front (white) (progressive rate) (2) Pair of white progressive-rate springs for Traxxas long Ultra Shocks are custom-wound to provide res...
View full details
CHASSIS, LOW CG (BLACK) Change up the color on your low-CG-equipped 2WD Slash with this black chassis. Low-CG chassis do not fit standard 2WD Slas...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS