TRA6845A Traxxas Drag link, machined 6061-T6 aluminum (blue-anodized)
TRAXXAS
This is an optional Traxxas Aluminum Drag Link, intended for use with Traxxas Slash 4x4, Rustler 4x4 and Stampede 4x4 models. This machined alumin...
View full details
This is an optional Traxxas Aluminum Drag Link, intended for use with Traxxas Slash 4x4, Rustler 4x4 and Stampede 4x4 models. This machined alumin...
View full details
This is a replacement Traxxas Front Bulkhead, and is intended for the Traxxas Rustler 4x4 and Slash 4x4 vehicles. Features: Factory Replacement Pa...
View full details
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
This is a Traxxas TRX-4 Two Speed Conversion Kit. This is a replacement part for any TRX-4 equipped with a 2 speed transmission, as well as an opti...
View full details
TRX-4 SPORT LIGHT KITS Hit the Trail Day or Night with Rock-Solid Reliability  Genuine Traxxas LED light kits for the TRX-4 Sport are engineere...
View full details
This is a 3-in-1 wire harness for your LED light kit, this is made of high quality plastics and wire, makes a great accessory for the TRX-4 kit, TR...
View full details
Traxxas Rubber Tires Wheelie Bar Wheels (2) Features: Constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls ...
View full details
This is a pack of four replacement Traxxas 4-Tec 2.0 Shock Caps. These caps feature installed eyelets.Â
This is a replacement Traxxas Front Driveshaft for the 4-Tec 2.0.
This is a pack of two replacement Traxxas 4-Tec 2.0 Steering Blocks. Features:Factory Replacement Part Includes:(2) Steering Blocks
This is a pack of two replacement Traxxas 4-Tec 2.0 Rear Driveshafts.Â
This is a set of four Traxxas Y-Spoke chrome mounted Pro-Trax on-road tires and wheels. They come with superb pre-glued racing tires with contoured...
View full details
Accessory part for these models: Bigfoot© No. 1 Officially Licensed Replica Bigfoot© Officially Licensed Replica Ford F-150 Raptor Nitro Slash Ru...
View full details
This is the Front and Rear Ball Bearing set for the Traxxas 2.5 nitro engine.FEATURES:Steel ConstructionINCLUDES:One Front BearingOne Rear BearingS...
View full details
Features:Steel constructionFastens lower rear suspension arms to chassis Includes:Two 4x85mm Suspension Pins Specifications:Diameter: 0.16" (4mm)Le...
View full details
These are the Traxxas Stub Axle Carriers for the LaTrax Teton Monster Truck.Features: Black colored Made of plastic For the LaTrax Teton Monster T...
View full details
This is the front foam body bumper for the 1/18 scale LaTrax Rally. Features: Foam construction Fastens to front bulkhead and protects front of...
View full details
These are the optional pivot ball caps for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Hard anodized aluminum Replaces stock p...
View full details
Stub axle, front, steel-splined constant velocity (1) Replacement steel front stub axle for Traxxas steel CV driveshafts (6851R). Accessory part ...
View full details
This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features:  Plastic and metal construction  Includes:  (3) Different plasti...
View full details
This is an optional Traxxas "Short" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects o...
View full details
GEAR, 34-T PINION (1.0 METRIC PITCH), FITS 5MM SHAFT
Tire & wheel assy, glued (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD Front) Pair of SCT off-road ti...
View full details
This is a replacement Traxxas Half Shaft Joint Re-Build kit, intended for use with the Traxxas Summit Monster Truck. This kit contains the hardware...
View full details
Gear, 18-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw 18-tooth pinion gear (32-pitch) fits 5...
View full details
This is the chassis top plate for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in color and holds receiver and th...
View full details
Rod ends (GTR shocks) Set of six rod ends for GTR shocks. Replacement part for these models: E-Revo® VXL Brushless Jato® Revo® Slash 4X4 Ultim...
View full details
This is a pair of 5.9 rate (blue) shock springs for the Traxxas Revo.Features: Metal construction that’s red in color (small blue square indicates ...
View full details
VXL-3m Electronic Speed Control, waterproof (brushless)
Wiring harness for RX Power Pack, Revo® (includes on/off switch and charge jack) Wiring harness for Revo and Slayer rechargeable receiver power pa...
View full details
Servo case/gaskets (for 2056 and 2075 waterproof servos)
Sold out
When strength becomes an issue and breaking parts gets expensive, you can always count on RPM to come to the rescue! Our Shock Tower & Body Mou...
View full details
RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Check out this laundry list of awesome features: ...
View full details
Description In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-ar...
View full details
Product Specifications Gear Pitch 1.0 Module Gear Type Pinion Part Type Gears Tooth Count 24 Tooth
Product Specifications Part Type Gears Tooth Count 21 Tooth Gear Pitch 1.0 Module Gear Type Pinion
Overview The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. ...
View full details
Overview The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. ...
View full details
Overview 32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears the...
View full details
This is a replacement Losi Desert Buggy XL Spindle, Spindle Carrier & Hub Set. Package includes two spindles, two spindle carriers, four spindl...
View full details
Aluminum Sway Bar Mount Set Kraton Outcast
Aluminum Shock Upgrade Kit: X-Maxx
Transmission Plastic Gear Set: 1:10 2wd All-In Store Only
We invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS