TRA1935 Turnbuckles, 36mm (2)
TRAXXAS
Turnbuckles, 36mm (2) Pair of 36 mm turnbuckles. Includes spacers. (rod ends sold separately) Replacement part for these models: Drag Slash 1967...
View full details
Turnbuckles, 36mm (2) Pair of 36 mm turnbuckles. Includes spacers. (rod ends sold separately) Replacement part for these models: Drag Slash 1967...
View full details
This is the Traxxas 14T Pinion Gear and Set Screw for the LaTrax Rally Car.Features: Silver/grey colored Made of steel For the LaTrax Rally Car I...
View full details
This is a replacement Motor Plate from Traxxas. Features: Aluminum construction Blue in color Includes: (1) Motor Plate  Requires: Inst...
View full details
This is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full details
This is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full details
This is a replacement Differential part set, intended for use with the Traxxas Summit Monster Truck. Includes: Heavy Duty Differential Carrier (1)...
View full details
Traxxas replacement GTR shock caps and spring retainers for the Revo. Replacement GTR shock retainers for the Traxxas Nitro Revo Monster Truck. INC...
View full details
This is the Traxxas pair of assembled GTR blue-anodized aluminum shocks without springs for the Traxxas Revo, E-Revo, Summit, Slayer and Jato. GTR ...
View full details
This is the replacement starter shaft for the T-MAXX 2.5 engine.Features: Steel ConstructionIncludes: One shaftRequires: Traxxas 2.5 T-MAXX engineS...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full details
These are plastic washers from Traxxas. This will work of the Nitro Rustler.Features: Plastic constructionIncludes: Ten WashersRequires: Traxxas Ni...
View full details
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) 65-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performanc...
View full details
Propeller Replacement plastic propeller Replacement part for these models: Blast
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum stub axle carriers i...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
These are non-adjustable camber link for the Traxxas Rustler and Stampede.Features: Black Plastic ConstructionIncludes: Two Short and Two Long Link...
View full details
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Replacement Big ...
View full details
Screws, 4x30mm button-head machine (hex drive) (6) 4x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias 2.2" tires)
Servo, digital high-torque (ball bearing), waterproof (X-Maxx mount)
Save 22%
PURPOSE BUILT TRX-4® Sport combines the unbeatable ground clearance and driving dynamics of Traxxas portal axles, sticky Canyon Trail™ tires...
View full details
Sold out
MODEL SPECS Name: 1/16 E-Revo with USB-C Type: Monster Truck Skill Level: 1 Scale: 1/16 Weight: 2.73 pounds (1.24 kg) Length: 12.6...
View full details
Sold out
Videos LaTrax Alias Quad-Rotor Ready-To-Fly Helicopter 2.4GHz radio system Quad-rotor thrust with auto-leveling 6-axis flight system Four ...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
Carrier, differential (aluminum)/ (requires #7783X spider gear shaft) Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket,...
View full details
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies) Front and rear fender flares for the TRX-4® 8011-series Land Rover® ...
View full details
Bumper mounts, front & rear/ screw pins (4) Replacement front and rear bumper mounts for TRX-4®. Includes screw pins (4). Replacement part fo...
View full details
This is a set of optional Traxxas Assembled Steel CV Driveshafts, and are intended for use with the Traxxas 1/16 E-Revo VXL.Traxxas Steel Constant ...
View full details
This is a replacement Traxxas Rear Suspension Arm Set. Features:Factory Replacement Suspension Arm Set Includes: (2) Upper Suspension Arms (Right...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the CV style stub axle for use on the Traxxas Summit Truck RTR.Features: Machined steel construction that’s CV styleIncludes: CV Style Stu...
View full details
This is the optional clear body for the Traxxas Summit.Features: Highly detailed body and cutting lines for the 1/10 scale versionIncludes: Clear b...
View full details
Spring, shock (GTR) (6.4 rate purple) GTR shock springs use high-quality spring steel with a durable red powder-coated finish. GTR springs are off...
View full details
This is the throttle & brake linkage set for the REVO from Traxxas.Includes: Throttle & brake linkage rods Springs Thumb nut Various other...
View full details
Wheel nuts, splined, 17mm (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Tr...
View full details
Traxxas piston and sleeve with two wrist pin clips for the Traxxas TRX 3.3 engines Traxxas piston and sleeve are made of ABC construction, Aluminum...
View full details
Traxxas high volume air filter body for the Maxx Trucks. Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber ...
View full details
Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX® 2.5, 2.5R, 3.3) Air filter housing with foam insert include ...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...
View full details
Spur gear, 68-tooth (0.8 metric pitch, compatible with 32-pitch) 68-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 20-tooth (32-pitch) pinion gear is mach...
View full details
Screws, 3x15mm flat-head machine (hex drive) (6) Set of six 3x15 mm flat-head machine screws with hex-drive heads Replacement part for these mode...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS