TRA5114A Ball bearings, black rubber sealed (5x8x2.5mm) (2)
TRAXXAS
Ball bearings, black rubber sealed (5x8x2.5mm) (2) Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
Ball bearings, black rubber sealed (5x8x2.5mm) (2) Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
These are the Traxxas 17mm Serrated Splined Wheel Nuts, replacement part for the X-Maxx and can also be used on the VXL Revo. Features: Aluminum c...
View full details
This is a replacement Traxxas 1/16 Steel Center Drive Shaft Set, and is intended for use with the Traxxas 1/16 scale family of 4WD vehicles. These ...
View full details
Springs, front (progressive, +20% rate, blue) (2) Pair of long progressive-rate springs are custom-wound to provide responsive control over small ...
View full details
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4) Set of two heavy-duty half shafts includes internal shaft...
View full details
Cush drive key/ pin/ elastomer damper Cush drive key includes pin and elastomer damper Replacement part for these models: E-Revo® VXL Brushless ...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the Traxxas set of four Anodized 17mm Splined Wheel Hubs, (4). These Splined Wheel Hubs are red colored and compatible with the Traxxas Sla...
View full details
Gear set (complete) (EZ-Start® 2) Complete EZ-Start® 2 replacement gear set Replacement part for these models: Jato® Nitro Rustler® Nitro Slash ...
View full details
Traxxas Skid Plate Front Plastic Gray Features: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color Inclu...
View full details
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth spur gear (32-pitch) fits the 6814 center ...
View full details
Cover, gear/ rubber gear cover plug/ 3x6 RM (2) Replacement gear cover for Magnum 272 transmissions. Includes clutch nut adjustment cover plug and...
View full details
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) Change the ride height on your vehicle with these spring pre-load spacers for Traxxas ...
View full details
Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench Set of six 3x10 mm cap-head machine screws with hex drive heads and lo...
View full details
TRA9576 Traxxas Wheelie bar, black (assembled)
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Extreme heavy-duty front steel CV (constant velocity) driveshafts are e...
View full details
Oil, differential (500K wt) (0.7 oz (20cc)) Thick 500k weight differential oil adds significant locking action to your differentials. Traxxas perf...
View full details
Battery, Series 4 Power Cell, 4200mAh (NiMH, 6-C flat, 7.2V) Traxxas 4000-series Power Cell NiMH battery packs provide 25% greater capacity tha...
View full details
Traxxas Motor, 2200Kv 75mm, brushless (with 6.5mm gold-plated connectors & high-efficiency heatsink)
Transmitter, TQ 2.4GHz, 2-channel (transmitter only) Switch on the power and drive! That's all there is to it with the TQ™ 2.4GHz radio. There are...
View full details
Chassis top brace Replacement X-Maxx® chassis top brace Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
This is the Spool Housing, Spool Shaft and Bushing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Molded Composite Housing & Bush...
View full details
This is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
These are the Traxxas Premounted Off-Road Monster Truck Tires on 5-Spoke Wheels for the LaTrax Teton Monster Truck.Features: Black colored Plastic...
View full details
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
This is a optional Traxxas Aluminum Steering Block Set, and is intended for use with the Traxxas Slash 4x4 truck. Precision-machined for total stee...
View full details
This is a pack of two replacement Traxxas Pre-Mounted Robby Gordon Rear Tire & Wheels, and is intended for use with the Traxxas Slash Robby Gor...
View full details
This is the black wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction that’s black in colorInc...
View full details
This is the upper & lower left front suspension arm set for the REVO from Traxxas.Features: Durable black nylon constructionIncludes: Upper and...
View full details
This is a replacement Traxxas Body Mount Set. This set includes the front and rear mount.
Velineon VXL-3m Brushless Power System, waterproof (includes waterproof VXL-3m ESC and Velineon 380 motor)
Turnbuckles, toe link, 55mm (75mm center to center) (2)
Save 26%
THE ULTIMATE STADIUM TRUCK EXPERIENCE Rustler® 4X4 VXL revolutionized the stadium truck experience with its tough-as-nails chassis and ...
View full details
Race-Inspired EngineeringExtreme 8S Power and SpeedX-Truck Size and Strength The Traxxas XRT® fuses race-inspired design and engineering with...
View full details
This is a Traxxas color-burst painted body with pre-applied decals for the 1/18 LaTrax Desert PreRunner 4WD racing truck.
This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for the 1/10 Slash 4x4 vehicles. Accessory Part For1/10 Ford Fiesta ST RallySlash 4x4 Br...
View full details
Traxxas Battery/charger completer pack (includes TRA2969 2-amp NiMH peak detecting AC charger (1), TRA2923X 3000mAh 8.4V 7-cell NiMH battery (1))
High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features....
View full details
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Spiral-cut 37-tooth ring and 13-tooth pinion front differential ...
View full details
This is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. Â Features: Fully assembled Made from 6061-T6 aluminum Black-...
View full details
This is a replacement LaTrax 10 Tooth Pinion Gear, with set screw. This package also includes a small bracket and two mounting screws. Features:Fa...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Set of front and rear bulkhead tie bars with a brilliant blue anodized finish Repla...
View full details
This is a replacement Traxxas Rear Stub Axle, and is intended for use with the Traxxas Slash 4x4, Slash 4x4 Ultimate, Rally and Slash equipped with...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
This is the suspension multi-tool for Traxxas Revo. It is used to adjust the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen t...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS