This is a package of 3X20mm Flat Head Countersunk Hex Screws by Traxxas.FEATURES:Flat head countersunk screw with a hexagon drive insertINCLUDES:Si...

Traxxas Cap Head Machine Screw 3x32mm (6) Features: Black finish Steel construction Cap head design Includes: (6) 3X32mm cap head machine screws...

Screws, 4x18mm countersunk machine (hex drive) (6)

Traxxas Lenses, Headlight (2), Tail Light (2) (Fits TRA9710 Body)

Traxxas brake disc set for the 3.3 T-Maxx RTR is constructed of steel Includes: Brake Disc for the 3.3 Traxxas T-Maxx RTR COMMENTS: Fits the 3.3 ve...

Screws, 3x30mm cap-head machine (hex drive) (6) 3x30 mm cap-head machine screws with hex drive heads. Set of six.

Spd Control Mount Plate Rust

Servo mounts

his is the Traxxas fuel bottle rebuild kit.Features: Clear plastic bottle lid Black rubber dispensing fuel cap Includes: One fuel bottle lid and ...

Spring, throttle return (2) (Revo) Replacement part for these models: Revo® Slayer® Pro 4X4 Accessory part for these models: TRX® 2.5R TRX® 3.3

Traxxas six pack of 3X28mm cap head screws have a zinc finish and metal construction. Includes: (6) 3X28mm cap head screws(6) lock washers(6) washe...

Slipper tension spring/ spur gear bushing & locknut

Screws, 3x25mm countersunk machine (hex drive) (6)

Nuts, 2.5mm nylon locking (12) Set of twelve 2.5 mm nylon locking nuts. Replacement part for these models: E-Revo® VXL Brushless Jato® Revo® Sla...

These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...

Header screws, 3x23mm cap hex screws (6)

This is a Replacement Slide Carb Bellcrank Link for the Traxxas T-Maxx. This part is connected to the engine throttle linkage.

TRA6464 Housing, cush drive (front & rear halves)

TRA4978 Screws, 3x21mm button-head machine (hex drive)

Fittings, inlet (nipple) for fuel or water cooling (2)

Suspension pins, 48mm (2) w/ E-clips

Cylinder head bolts, marine 3x20mm CS (6) (TRX 2.5)

Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3) 3x12 mm cap-head machine screws with hex drive heads. Set of six. Repl...

Baffle cone, exhaust (1) (aluminum)

Traxxas Speed Control Mount Plate

Traxxas Screws 3x36mm Hex (6) Features: Metal construction Black in color Countersunk types Screw Includes: Six 3mm x 36mm Countersunk Machine S...

Screws 3x4mm Cap-Head Machine (6)

Body clips (12) (standard size) Standard-duty body clips. Sold as a pack of 12. Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®...

Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1) Keep your receiver antenna wire safe with this black antenna tube and vinyl cap...

These are the differential and transmission gaskets for the Traxxas Nitro Jato Stadium Truck.Features: Rubber construction that’s black and blue in...

TRA3742 Shoulder screws, steering bellcranks

This is the optional glow plug wrench from Traxxas.Features: Features aluminum construction and a dull silver color Will work on 7mm and 8mm glow ...

Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)

Traxxas Brake Brackets Features: Silver aluminum construction Includes: One inner bracket One outer bracket  Part Compatibility: Traxxas Nitro...

Water pick-up, backing plate and tee-fitting for Villain EX series for water cooling. Accessory for other boats.

Traxxas Wheel Adapter  Features: Allow the use of Aftermarket Wheels to be Used. Includes: Four Wheel Adapters Part Compatibility: Traxxas Nit...

This is a Metal Hanger for the Tuned Pipe on the Traxxas Revo.FEATURES:Metal constructionPrebent hanger wireINCLUDES:One metal hanger wireOne 4X10m...

CS 3x10 flathead (hex drive) Set of four 3x10 mm flat-head machine screws with hex drive heads Replacement part for these models: 4-Tec® 2.0 AWD...

Mounts, suspension arm (rear) (+/- 1-degree) (l&r)

Screws, 3x12mm roundhead self-tapping (6)

Screws, 3x18mm roundhead machine (6)

Turnbuckles, 36mm (2) Pair of 36 mm turnbuckles. Includes spacers. (rod ends sold separately) Replacement part for these models: Drag Slash 1967...

Screws, 3x8mm washerhead self-tapping (6)

Screws, 3x12mm roundhead machine (6)

Screws, 4x12mm countersunk machine (100-degree) (6)

Screws, 2x8mm countersunk machine (6)