TRA5342 Tuned pipe, aluminum, blue-anodized (dual chamber with pressure fitting)/ 4mm GS
TRAXXAS
TRA5342 Tuned pipe, aluminum, blue-anodized (dual chamber with pressure fitting)/ 4mm GS
TRA5342 Tuned pipe, aluminum, blue-anodized (dual chamber with pressure fitting)/ 4mm GS
TRA5339 Insert, threaded steel (replacement inserts for Tubes) (includes (1) left and (1) right threaded insert)
FEATURES: Black nylon construction INCLUDES: One upper rear and one lower rear suspension arm REQUIRES: Removing stock suspension arms Adjusting ca...
View full detailsSuspension Arms, Right: Revo, Revo 3.3 This is the Upper and Lower Right Suspension Arm Set used in theRevo Adjustable Suspension Arm Set, TRAC534...
View full detailsThese are the front and rear red aluminum bulkhead tie bars for the Revo from Traxxas.Features: Blue anodized aluminum (2.5mm thick)Includes: One f...
View full detailsTraxxas 90º pressure fitting is constructed of polished aluminum and threaded at one end. This is the pressure fitting that is used on the Tuned Pi...
View full detailsThis is a package of flat head countersunk machine screws from Traxxas.Features: Silver metal construction Flat head Phillips drive Includes: Six...
View full detailsTRA5146 Hanger, metal (T-Maxx/S-Maxx) (TRX 2.5, 2.5R)
These are the optional lightweight 112mm toe links with rod ends for the Traxxas Maxx models.Features: 30% lighter than stock steel toe links 4 ti...
View full detailsTRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
This is the 26 tooth Reverse Output Gear Assembly for the Traxxas T-Maxx4WD Radio Control Monster Truck.This reverse output gear installs on the ou...
View full detailsTraxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...
View full detailsTraxxas Gear Shaft Primary Features: Replaces stock gear shaft. Constructed of steel. Includes: One gear shaft Part Compatibility: Traxxas S-...
View full detailsFEATURES: Replaces damaged or worn 2-speed drive gearsGears are constructed of plastic and pre-installed on steel shaft INCLUDES: One 17 and 22 too...
View full detailsThis is the Replacement Drive Hub Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.This drive hub assembly fits into the spur gear a...
View full detailsThis is the Replacement Pair of 14mm Snap Rings for the Gear Hub Assembly on the Traxxas T-Maxx 4WD Radio Control Monster Truck. These are extra sn...
View full detailsTraxxas replacement gear hub assembly for the T-Maxx 4WD Radion Control Monster Truck. This is the replacement gear hub assembly. This gear hub ass...
View full detailsThis is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full detailsFeatures: Fits all Traxxas vehicles in the Revo and Maxx seriesIncludes: Two 3.8 Tires and foam insertsRequires: Installing on wheels with Tire Glu...
View full detailsThis is the set of Foam Inserts for Traxxas T-Maxx 4WD RTR Monster Truck.These foam inserts fit inside each wheel adding firmness andkeeping the ti...
View full detailsThis is the set of tires for the Traxxas T-Maxx 4WD monster truck. These tires fit on the wheels of the T-Maxx.Features: Replaces damaged or worn ...
View full detailsTraxxas throttle brake linkage for the T-Maxx is an assortment of linkage wires for the Traxxas T-Maxx. These wires connect the servos to the engin...
View full detailsReplaces stock silver pivot ball aluminum caps. Constructed of blue aluminum.
Traxxas 4934 Aluminum Caps Pivot Balls (4pcs) T-Maxx These are the Pivot Ball Aluminum Caps for the Traxxas T-Maxx4WD Radio Control Monster Truck....
View full detailsThis is a pair of Traxxas Machined Aluminum Lower Chassis Braces in Blue with Hardware for the T-Maxx. These aluminum lower braces provide the ulti...
View full detailsTRA4922X Chassis, 7075-T6 billet machined aluminum (4mm) (blue)/hardware
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
Traxxas throttle and brake servo mounts for the T-Maxx 3.3 is constructed of gray plastic. Includes: Two servo mounts Specs:Length: 1-3/8" (36mm)Wi...
View full detailsTraxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts Specs:Length: 1-1/2" (38mm)Widt...
View full detailsTraxxas 4918 Servo Mounts Front/Rear This is a pair of Steering or Shifting Servo Mounts for the Traxxas T-Maxx. These mounts are what holds the s...
View full detailsTRA4740 Tires, 2.1" Pro-Trax ribbed (front) (2)
Traxxas Ball Bearings 5x8x2.5mm. Features: Standard bearings. Includes: Eight 5mm x 8mm Bearings Requires: Assembly into the model. Specs: Height: ...
View full detailsThis is the replacement EZ start control box for the Traxxas EZ Start. This is the box that attaches to the 6-Cell battery and controls the start o...
View full detailsTraxxas easy start Starting System for Nitro Vehicles using the Traxxas TRX and TRX PRO Engines such as NITRO SPORT, NITRO RUSTLER, NITRO STAMPEDE,...
View full detailsThis is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck.
This is the Traxxas Exhaust Header Set for the Nitro Rustler.This Exhaust Set bolts to the exhaust outlet of the engineand connects to the coupler ...
View full detailsFeatures:Painted whiteSteel construction Includes:Two springs Technical Specifications:Length: 3.11" (79mm)Inside diameter: .61" (15mm)Outside diam...
View full detailsThis is a pre-assembled tuned pipe for the Traxxas Rustler.Features: Plastic Construction Pre-Installed Pressure Tap and Wire Mount 90 Degree Rubb...
View full detailsTRA4445 Fuel tank vibration cushion, rubber
Traxxas fuel tank box, servo holder is constructed of gray nylon. Specs: Length: 88mm (3.47")Width: 101mm (3.98")Height: 28mm (1.10")
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...
View full detailsThis is the Rear Grey Bulkhead for the Traxxas Nitro Stampede. Features Sturdy grey nylon construction Includes One rear bulkhead for the Traxxas N...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS