TRA8928 Traxxas Bulkhead, rear (upper and lower)
TRAXXAS
This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full detailsThis is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full detailsThese are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...
View full detailsTraxxas Complete GTR Long Shocks feature hard anodized PTFE coated bodies with TiN shafts. These shocks are fully assembled and ready for oil, and ...
View full detailsFeatures:Hardened plastic constructionBlack in colorIncludes:One left caster blockOne right caster blockRequires:Installation on SlashTechnical Spe...
View full detailsThis is a slipper clutch rebuild kit for the Traxxas Revo and T-Maxx.Features: Repairs damaged slipper clutchesIncludes: Spring Two Nuts Pin Metal...
View full detailsRod ends, Revo® (large) with hollow balls (12) Set of twelve large Revo®-style rod ends with hollow balls. Replacement part for these models: 4-...
View full detailsTraxxas tune pipe coupler and exhaust deflector set for the Revo. Allows for a connection between the Exhaust Header and the Tune Pipe. Silicone co...
View full detailsTRA5211R Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing)
Ball Bearing, black rubber sealed (17x26x5) (2) Pair of 17x26x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal be...
View full detailsSpur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full detailsCarrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 6x10x0.5 TW Heavy-duty differential carrier with x-ring ga...
View full detailsShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxxas...
View full detailsALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to t...
View full detailsGear, 16-T pinion (48-pitch) / set screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full detailsTelemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3) The telemetry trigger magnet holders secures the tri...
View full detailsDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2)Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxa...
View full detailsHeavy-Duty Suspension Arms Heavy-duty suspension arms for Stampede®, Rustler®, and more feature our latest proprietary composite material. Traxx...
View full detailsServo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...
View full detailsThis is the Traxxas GTR Hard Anodized XX-Long Shocks with Titanium Shafts.Features: Black colored TiN coated shafts Bodies made of alumnum Includ...
View full detailsThis is a Traxxas M0.8P, 52T spur gear.Features: M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears Includes: One M0...
View full detailsThese are replacement slipper friction pegs for all of the Traxxas kits that have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...
View full detailsThis is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full detailsThis is the optional 40 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full detailsThese are the 3x6mm flathead machine screws used on the Traxxas T-Maxx 3.3 RTR.Features: Constructed of steel that’s black in colorIncludes: Six 3x...
View full detailsShock shafts, steel, chrome finish (long) (2) Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2). Replacement pa...
View full detailsTRX-4® Deep-Terrain Traxx® Traction Redefined All-terrain Traxx with Deep-Terrain Treads provides the most significant traction upgrade you can ma...
View full detailsWheel hubs, splined, 17mm (blue-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm blue-anodized aluminum wheel hubs combine high-profile...
View full detailsThis is a replacement Traxxas Rear Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. Features: Nylon Co...
View full detailsThis is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full detailsThis is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full detailsTRA5280 Control box (complete) (EZ-Start 2)
This is a package of 6 threadlocked grubs (4mm) from Traxxas.Features: Threadlocking compound pre-applied Hardened steel construction Designed for...
View full detailsThis is a set of two optional blue aluminum steering blocks with ball bearings from Traxxas. These steering blocks mount the the front uprights, an...
View full detailsBall bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full detailsTailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full detailsThis is a Traxxas 61-Tooth Spur Gear factory replacement for the 1/18 scale LaTrax Desert PreRunner and LaTrax Teton. Includes: 1 61 tooth spur gear
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full detailsPipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...
View full detailsThis is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Blue.Features: Steel construction with blue rubber seals Used in the front and...
View full detailsDifferential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full detailsThis is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full detailsSteering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full detailsSuspension arms, left & right Replacement left & right suspension arms Replacement part for these models: BIGFOOT® No. 1 Officially Li...
View full detailsTurnbuckles, camber link, 36mm (56mm center to center)(rear)
This Traxxas Stainless Screw Kits is 100% complete. Your new kit will include everything needed to do a full conversion on a TRX-4. Stainless Steel...
View full detailsThis is the Traxxas Transmission Cush Drive Elastomer Damper for the Traxxas X-Maxx. This system requires the Cush Input Shaft (TRA7786X). Includes...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS