TRA5334R Axle carriers, left & right (1 each)
TRAXXAS
These are the optional axle carriers left and right for use on the Traxxas Revo series.Features: Nylon construction that’s black in color Allows f...
View full details
These are the optional axle carriers left and right for use on the Traxxas Revo series.Features: Nylon construction that’s black in color Allows f...
View full details
This is the optional clear gear cover for use on the Traxxas Slash 4x4.Features: Plastic construction that is clear in colorIncludes: One Clear Gea...
View full details
Springs, rear (progressive, +20% rate, blue) (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over smal...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) Left and right stub axle carriers. Required 20x32x7 bearings. Replacemen...
View full details
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
This is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full details
Traxxas updated wire harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Extra...
View full details
Suspension arms (front) (2) Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica ...
View full details
Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2) Pair of replacement 110 mm steel shock shafts wit...
View full details
These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...
View full details
Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2) Set of replacement rod ends with 16 long ends and 4 short ends. Inc...
View full details
Screws, 3x10mm cap-head machine (6) (no washer)
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
¶ MODEL 44054-1: Nitro Slash: 1/10 scale 2WD nitro short course truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with T...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
Traxxas EZ start system is a simple push-button starting for glow plug and starter motor. LED status for both glow plug and starter motor All-in-on...
View full details
Gear set, metal (for 2070, 2075 servos) Replacement high-torque metal gear set for 2075X servo. Gears may also be used to upgrade 2070, 2075, and ...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
Spur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full details
Screws, 3x18 button-head machine (hex drive) (6) 3x18 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details
This is an optional Traxxas Center Driveshaft Set, and is intended for use with the Traxxas E-Revo and Summit trucks. Traxxas Steel Constant Veloci...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx) Pair of replacement lower suspension arms for T-Maxx® and E-Maxx® trucks. Replacement part for ...
View full details
Gear, 19-T pinion (48-pitch) / set screw 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Alias® tires, foam inserts) (electric rear) (2) Alias® step-pin tires provide...
View full details
This is the Stuffing Tube with Nylon Liner for the Traxxas Spartan.Features: Brass and nylon constructionIncludes: One Assembled Stuffing TubeRequi...
View full details
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full details
This is an optional Traxxas LED Light Bar Set and is intended for use with the Traxxas Summit. Now you can blaze even brighter trails! The new Acce...
View full details
Traxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknutRequires:...
View full details
Rustler 4X4 LED Light Kit Built Traxxas Tough™The Traxxas Rustler® 4X4 takes stadium truck performance to new heights. The all-new High-Output Off...
View full details
Screws, 3x30mm button-head machine (hex drive) (6) 3x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 15-tooth pinion gear (1.0 metric pitch) fits...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS