TRA7057 Yokes, differential and transmission (2)/ 3x10mm screw pin (2)
TRAXXAS
This is a set of replacement Traxxas Differential And Transmission Yokes with Hardware , and are intended for use with the Traxxas 1/16 Slash, and ...
View full details
This is a set of replacement Traxxas Differential And Transmission Yokes with Hardware , and are intended for use with the Traxxas 1/16 Slash, and ...
View full details
Traxxas Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump, 8.4V) Traxxas premium 5000-series Power Cell NiMH battery packs provide the highest capa...
View full details
Suspension arms, left & right Replacement left & right suspension arms Replacement part for these models: BIGFOOT® No. 1 Officially Li...
View full details
This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.Includes: One 70 tooth gearFeatures: Tough nylon construction Drilled fo...
View full details
Steering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
Sledgehammer Extreme Terrain Tires Extreme Terrain TractionSledgehammer extreme-terrain tires provide maximum traction and control on varie...
View full details
Traxxas Cush Drive Housing. Package includes one front half and one rear half. Features:Nylon Construction Includes:(1) Front Half(1) Rear Half
This is a pack of two replacement Traxxas 55mm Toe Link Turnbuckles. These adjustable turnbuckles come assembled with rod ends and pillow balls.
Header, exhaust (tubular aluminum, silver anodized) (TRX® 2.5, 2.5R) Silver-anodized tubular aluminum exhaust header for the TRX® 2.5, 2.5R, and 3...
View full details
This is the Replacement O-ring header gasket for the Traxxas 2.5 Engine.This is located on the header of the engine.FEATURES:Red silicone construct...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a ...
View full details
This is the glow plug lead wire for the T-Maxx truck kit. This wire is attached to the glow plug that heats it while starting.Features: This is a ...
View full details
Traxxas Skid Plate Set 1/16 E-Revo/Slash VXL Fits: Traxxas 1/16 E-Revo Traxxas 1/16 Slash Traxxas 1/16 Rally Traxxas 1/16 Summit Traxxas 1...
View full details
Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and “...
View full details
These are the 3x6mm flathead machine screws used on the Traxxas T-Maxx 3.3 RTR.Features: Constructed of steel that’s black in colorIncludes: Six 3x...
View full details
Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo) The stiffer heavy-duty servo saver spring and steel stee...
View full details
Half Shaft Set, Long (Plastic Parts Only) (Internal Splined Half Shaft/ External Splined Half Shaft/ Rubber Boot) (Assembled w/ Glued Boot) (2 Asse...
View full details
This is a pack of replacement shock rebuild parts for the GTR shocks (either the stock ones or the hard anodized ones). Included are shock bladders...
View full details
This is the motor and pinion gear for the Traxxas EZ Start 2 (R) System.Features: Pre-installed 10 tooth pinion gearIncludes: Motor and Pinion Gear...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right) Upgrade your standard r...
View full details
These are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full details
Screws, 3x15mm cap-head machine (hex drive) (6) 3x15 mm cap-head machine screws with hex drive heads. Set of six. Replacement part for these mode...
View full details
This is a pair of Fully Assembled (without springs) Long Green-Anodized GTR Shocks from Traxxas. Features: Hard Anodized PTFE Aluminum Bodies T...
View full details
The Traxxas Maxx Hardened Steel Suspension Pin Set is an optional upgrade that will improve the durability of the Traxxas Maxx Monster Truck. These...
View full details
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) 59 mm (78 mm center to center) adjustable toe l...
View full details
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector) Replacement...
View full details
Steering blocks, left & right Left and right steering blocks Replacement part for these models: Maxx® Slash® Maxx®
TRA3037 Battery, RX Power Pack (5-cell hump style, NiMH, 1200mAh)
TRA5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full details
This is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full details
This is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full details
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxa...
View full details
These are the short half shafts for use on the Traxxas Summit Truck RTR.Features: Plastic construction that’s black in colorIncludes: Two Short Hal...
View full details
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
Spur gear, 50-tooth (1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas...
View full details
Differential kit, center (complete) The optional center differential transfers power to the front and rear differentials independently for smooth ...
View full details
Features: Clear molded polycarbonate construction Trimmed out wheel arches and body post holes Includes: Latrax Teton Clear Body with Decal Sheet...
View full details
Screws, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
Traxxas 48 Pitch Spur Gears are available in 45, 50 or 55 tooth count options to fine tune the gear ratio of your model. Fits: Traxxas 1/16 E-Revo...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS