TRA6545 Tqi Charger: For Use w/Docking Base &TRA3037 Batt
TRAXXAS
This is the Battery Charger for the optional NiMH Batteryused in the Traxxas TQi Docking Base.FEATURES:Charges the optional Traxxas #3037 NiMH batt...
View full details
This is the Battery Charger for the optional NiMH Batteryused in the Traxxas TQi Docking Base.FEATURES:Charges the optional Traxxas #3037 NiMH batt...
View full details
Input shaft/ drive gear assembly, lightweight (18/ 13-tooth top gear) (hard-anodized/PTFE-coated 7075 T6 aluminum gears)
This is a slipper pressure plate and hub for the Traxxas X-Maxx Monster Truck. Features: Cast metal construction Installs on transmission input sh...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
This is an optional Traxxas Complete LED Light Kit. Package includes the power supply, chrome lightbar, wire ties, mounts, 2-red/4-clear roof light...
View full details
This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 Summit...
View full details
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation.The U-joint pins are held captive by a h...
View full details
Save 45%
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...
View full details
This is a replacement Traxxas Aluminum Rear Axle Carrier Set, and is intended for use with the Traxxas X0-1.
Traxxas Water Cooling Jacket Spartan Features: Rubber construction Includes: Water Motor Cooling Jacket Fits: Traxxas Spartan
Bulkhead, Rear (Left & Right Halves) for Summit Replacement Part For: Summit (Model# 56076-4)
This is the front bulkhead for use on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes: One Front Bulkhead ...
View full details
This is a pair of Traxxas "Alias" rear tires with foam inserts. Whether racing on a track or tearing across a back lot, the rear Alias tires are th...
View full details
This is the driveshaft assembly for the Traxxas Jato. These Driveshafts transfer power from the gearbox to the rear wheels.Features: Fully assemble...
View full details
These are the optional Front Caster Blocks for the Traxxas Jato.These are located on the front suspension assembly.FEATURES:Titanium-anodized alumi...
View full details
Traxxas chassis brace is constructed of 0.12 (3mm) thick 6061 T-6 aluminum and anodized blue in color. INCLUDES: Chassis Brace and 4x16mm hex head ...
View full details
TRA5342 Tuned pipe, aluminum, blue-anodized (dual chamber with pressure fitting)/ 4mm GS
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
Traxxas aluminum engine mounting set is constructed of aluminum. Hex drives and Phillips drive. This set has all of hardware to assemble the engine...
View full details
Traxxas 4429 Bumper Rear/Battery Box/Box Cover/3x15mm This is the Rear Bumper and Battery Box Cover for the Traxxas Nitro Slash Short Course Racing...
View full details
This is the Upper Composite Chassis Section for the Traxxas Nitro Slash Short Course Racing Truck. FEATURES Composite plastic construction, black ...
View full details
TRA9591 Traxxas Hardware, motor mount, Sledge
This is the Traxxas Communication Link/Telemetry Expander.FEATURES:For use with Traxxas telemetry componentsConnects the telemetry expander to the ...
View full details
This is a Replacement Slide Carb Bellcrank Link for the Traxxas T-Maxx. This part is connected to the engine throttle linkage.
This is a pair of Traxxas Rear Sway Bar Linkages with Hollow Balls and a Left/Right Sway Bar Arm for the Unlimited Desert Racer.
This is a Traxxas Upper/Lower Suspension Pin Retainer Set for the Unlimited Desert Racer. Includes:2x Upper Retainers1x Lower Retainer
This is a replacement Traxxas 4-Tec 2.0 Front Suspension Arm Set. Features:Factory Replacement Part Includes:(2) Front Suspension Arms
This is the Rear Differential Housing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Includes: (1) Rear Differential Housing
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
This is the Traxxas 4-Tec 2.0 Rear Bulkhead. This is used in both the Ford GT and Mustang GT versions.Fits4-Tec 2.0
This is the Red Tail Lights, Exhaust Tips, Exhaust Mount and Screws for the Traxxas Ford GT and 4-Tec 2.0 AWD. Features: Plastic construction R...
View full details
TRA4262 32mm Steel Shock Shafts (Chrome Finish) (2) Replacement part for these models:Nitro 4-Tec Accessory part for these models:4-Tec 2.0 AWD Cha...
View full details
This is the Offset Rod Ends for the Traxxas TRX-4 and TRX-6. Features: Plastic in Construction Includes: (4) Offset Rod Ends
This is a pack of ten replacement Traxxas 10° TRX-4 Angled Rod Ends.
Traxxas 8246 Steering Draglink TRX-4 This is a Traxxas set of a replacement 5x60mm steering link and a 5x117mm drag link. Features: Factory Replac...
View full details
This is a replacement Traxxas TRX-4 Transmission Gear Set.
This is the Front and Rear Suspension Arm Mounts, and Hinge Pin Retainers for the Traxxas 4-Tec. Includes: (2) Front Suspension Arm Mounts (2) ...
View full details
These are the two Wheels for the #6978 Wheelie Barused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, bla...
View full details
Traxxas brake disc set for the 3.3 T-Maxx RTR is constructed of steel Includes: Brake Disc for the 3.3 Traxxas T-Maxx RTR COMMENTS: Fits the 3.3 ve...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS