TRA5353A Wheel nuts, splined, 17mm (green-anodized) (4)
TRAXXAS
This is the Traxxas set of Splined 17mm Wheel Nuts, (4). These Wheel Nuts are green colored and compatible with the Traxxas T-Maxx 3.3 4WD Nitro Mo...
View full details
This is the Traxxas set of Splined 17mm Wheel Nuts, (4). These Wheel Nuts are green colored and compatible with the Traxxas T-Maxx 3.3 4WD Nitro Mo...
View full details
Traxxas complete accessory package of replacement steering and throttle servo horns for the Revo Truck. Black and grey plastic. INCLUDED: Three thr...
View full details
FEATURES: Black plastic air filter housing with cover screen andand changeable elementRubber double angled neck for filterZip tie for fastening INC...
View full details
These are the optional tubes lightweight aluminum turnbuckles for the Traxxas T-Maxx.Features: 30% lighter than stock steel toe links 4 times stif...
View full details
Traxxas optional aluminum engine mount for the Traxxas Nitro T-Maxx. This is located on the chassis and supports the engine. This mount fits both t...
View full details
Traxxas optional stainless steel suspension pin set for the Traxxas T-Maxx or E-Maxx Monster Trucks. These suspension pins hold the upper and lower...
View full details
This is the Traxxas Rubber Vibration Cushion for the 150cc Fuel Tank on the Nitro Slash.Features: Made of rubber For the Traxxas Nitro Slash Incl...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
This is a replacement Traxxas Maxx 4x15.8mm Drive Cup & Screw Pin, intended for use with the Maxx 1/10 Brushless Monster Truck. Use only with T...
View full details
Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977) Replacement fuses for Traxxas 12-volt DC chargers.
Shock tower, rear Replacement rear shock tower Replacement part for these models: Hoss® 4X4 VXL Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4
This is the replacement Gearbox Halves and Idler Gear Shift for the E-Revo VXL Brushless. Includes: (1) Front Gearbox Half (1) Rear Gearbox Hal...
View full details
This is the Traxxas E-Revo 2 Gear Cover and 3x12mm Capscrew.Stock Replacement OnE-Revo 2.0
This is the optional 13 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
Description: Traxxas Servo SaverThis item package consists of the following Traxxas items. Servo saver/ servo saver spring/ servo horn, steering ...
View full details
This is a replacement Traxxas TRX-4 Motor Plate and Upper Spur Gear Cover. Features: Factory Replacement Part Nylon Construction Includes: (1) ...
View full details
This is a pack of two replacement Traxxas 5x63mm TRX-4 Front Upper Suspension Links. Features: Factory Replacement Upper Suspension Links 5x63mm ...
View full details
This is a replacement Traxxas TRX-4 Lower Gear Cover Skid-plate Set. Features:Factory Replacement Parts Includes:(1) Lower Gear Cover Skid-plate Set
This is the set of two Traxxas spare tire mount, mounting bracket and screw pins.
This is a replacement Traxxas GTR Shock Spring Set, and is intended for use with the Traxxas 1/16 Rally.
These are the Links, Rear Sway Bar (2) for theNHRA Funny Car Race Replica by Traxxas, TRAD69**.FEATURES:Metal and black plastic construction.INCLUD...
View full details
This is the Traxxas Receiver Box and Cover for the Traxxas Funny Car.Features: Black colored Plastic construction For the Traxxas Funny Car Inclu...
View full details
This is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full details
This is a set of two optional aluminum idler gear shafts from Traxxas. These idler shafts support the idler gears inside the transmission.
Water pick-up, backing plate and tee-fitting for Villain EX series for water cooling. Accessory for other boats.
This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSk...
View full details
Anchoring pins with locknuts (4)/ plastic thumbscrews for upper deck (4)
Traxxas package of two front and rear toe links are constructed of green composite material. For the 1/16 Slash and E-Revo. Fits: Traxxas 1/16 Ral...
View full details
This is the center driveshaft for the Latrax SST Stadium Truck.Features: Aluminum constructionIncludes: Center Driveshaft 1.5 x 8mm Steel Pin
Traxxas 7569 LaTrax Rally Wheel Hubs Hex (Disc Brake Rotors) (4)These are the Wheel Hubs for the Latrax Rally Car from Traxxas.FEATURESFor front an...
View full details
This is a replacement LaTrax Front & Rear Suspension Arm Set. Package includes four suspension arms that can be used in either the front or rea...
View full details
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series.FEATURES:Nylon and rubber constructionINCLUDES:Two Diff Gear CoversTwo L...
View full details
This is the Sway Bar Wires Set for the Traxxas Slash 4x4FEATURES:Steel constructionBlack and silver for soft and hardINCLUDES:2 front sway bars2 re...
View full details
This is a set of two Traxxas Progressive Rate Front Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjus...
View full details
These are the Traxxas Front/Rear Plastic Non-Adjustable Camber Links for the Telluride 4x4.Features: Grey colored Made of tough plastic Fits the f...
View full details
Includes: (2) Battery Hold Down Retainers Replacement Part For: XO-1® (Model# 64077-3)
Traxxas pair of rear springs are constructed of white steel. Specs: Length: 71mm (2.8")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56"...
View full details
Traxxas Trib Tab 4x12mm BCS Spartan (2) Features: Stainless steel construction Pre-drilled for mounting Includes: Two trim tabs w/mounting hardw...
View full details
This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...
View full details
FEATURES:Nylon constructionRed in colorBeadlock styleINCLUDES:Two Red Sidewall ProtectorsTwenty Four 2.5x8mm Cap ScrewsREQUIRES:Installation on the...
View full details
These are the blue sidewall protectors from Traxxas.Features: Nylon construction that’s blue in color Beadlock style Includes: Two Blue Sidewall ...
View full details
This is a Rear Bumper and Mount for the Traxxas Summit from Traxxas. Features Black plastic with mounting screws Includes Rear bumperRear bumper mo...
View full details
This is the roof and front bumper lightbar for use on the Traxxas Summit Truck RTR.Features: Plastic construction that is chrome in colorIncludes: ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS