TRA5141 Turnbuckles, toe links (5.0mm steel) (front) (2)
TRAXXAS
These are the front turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Front...
View full details
These are the front turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Front...
View full details
Tires & wheels(Tracer 2.2" chrome wheels,Anaconda 2.2" tires with foam inserts)
Turnbuckles, aluminum (red-anodized), toe links, 61mm (2)(assembled with rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wrench...
View full details
M3x27mm Bhcs Button Head Cap Screws (6)
Traxxas 7529 Latrax Servo Mount/Servo HornThis is the Servo Mount/Servo Horn for the Latrax Rally Car from Traxxas.FEATURESPlastic constructionServ...
View full details
This is a replacement Traxxas Front Bumper/Skidplate Set, and is intended for use with the Traxxas Stampede 4X4. Features:Factory Replacement Set I...
View full details
TRA6534 Telemetry trigger magnet holder/ magnet 5x2mm (1)
Traxxas package of four 17mm hub retainers. This is the new hub retainer pin that is used on the new TRA5853X & TRA6856X 17mm wheel adapter ass...
View full details
This is the steering bellcrank set for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s gray in colorIncludes: Left and Ri...
View full details
These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...
View full details
Traxxas primary forward and reverse gears for the Traxxas T-Maxx 3.3. Gears are constructed of steel and plastic. This package includes;One Plasti...
View full details
This is the Traxxas left electronics box for the Traxxas Revo 3.3.Features: Constructed of plastic Holds the high torque and micro servos for the ...
View full details
Traxxas stock replacement differential gear set for the T-Maxx. Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be r...
View full details
This is the shock tower for the all versions of the Traxxas T-Maxx. This is for rectangular body posts.Features: Plastic constructionIncludes: Shoc...
View full details
Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
Screws, 4x25mm button-head machine (hex drive) (6)
Screws, 2.5x10 countersunk machine (hex drive) (6) 2.5x10 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for th...
View full details
Bushings, self-lubricating (5x11x4mm) (14)
Save 13%
**** Free battery charger with the purchase of this truck. Please add TRA2827X and TRA2920 to your shopping cart. It will automatically discount...
View full details
Axle housing, intermediate (TRX-6™) or rear (TRX-4®) Replacement rear or intermediate axle housing Replacement part for these models: TRX-4® 197...
View full details
This is a replacement Traxxas TRX-4 Front Axle Housing. Features:Factory Replacement Part Includes:(1) Front Axle Housing Axle housing, front Re...
View full details
Cable, T-lock (front) Replacement front differential T-Lock cable for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1972 C...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
Traxxas Resonator aluminum tuned pipe for Revo is specifically engineered to fit right in the chassis and compliment Revo's TRX 2.5R and 3.3R racin...
View full details
Save 13%
NEW FROM TRAXXAS MODEL 102076-4: Maxx Slash 4WD 6s brushless short course truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio sys...
View full details
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right Includes: (...
View full details
This is the Replacement Backplate for the Traxxas 2.5 engine.This backplate is used on the 2.5 equipped with EZ starter.FEATURES:Aluminum construct...
View full details
This is a replacement Traxxas Maxx Transmission Input Shaft, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Features:Factory Repl...
View full details
This is a replacement set of two Traxxas Maxx Gear Covers, intended for use with the Maxx 1/10 Brushless Monster Truck.
This is a replacement Traxxas Rear Upper and Lower Bulkhead Set, for use with the TRA8622 Chassis only. This set includes the upper and lower bulkh...
View full details
This is a replacement pack of Traxxas 72mm GT-Maxx Steel Shock Shaft with a chrome finish with Rod Ends, intended for use with the Maxx 1/10 Brush...
View full details
Wheel nuts, splined, 17mm, serrated (black-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
Wheelie bar The Rustler 4X4 wheelie bar helps prevent backflips under full-throttle acceleration. Replacement part for these models: Rustler® 4X...
View full details
This is a front or rear suspension screw pin set hardened steel by Traxxas. Includes Four 4x18mm pins Two 4x38mm pins Two 4x33mm pins Two 4x43mm p...
View full details
This is a set of center harness lights, intended for use with the Traxxas Summit Monster Truck.
Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks) The GTR shock rebuild kit ...
View full details
Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
Skidplate, transmission, nylon (black)/ coverReplacement part for these models:E-Revo VXL Brushless
Just like the Traxxas heavy-duty suspension arms, X-Maxx orange roof skid plates use our toughest composite material. Whether you’re sending it at ...
View full details
This is a set of optional anodized 6061-T6 aluminum toe links for use with the TRA8995 WideMaxx Suspension Kit. These toe links measure 119.8mm o...
View full details
Traxxas Body Mount Posts XO-1 (2) Features: Black colored Includes: Two mount posts Two post pivots Two screw pins Fits: Traxxas XO-1 Traxxas ...
View full details
This is a replacement differential ring and pinion gear set for the Traxxas TRX-4. Package contains one ring gear and one pinion gear. Features:F...
View full details
This is a Traxxas 52T, 32P Spur Gear for use on the centerDifferential of the Slash 4X4. Features M0.8 pitch52 toothBlack plastic constructionCompa...
View full details
Portal drive input gear, rear Rear portal drive input gear Replacement part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™...
View full details
This is the Blue Anodized Aluminum Spring Retainer (adjuster) for the Traxxas GT-Maxx Shocks. Features: Anodized Aluminum Blue in Color In...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS