Filters
Accessories
Brand
- ARRMA
- ASSOCIATED
- AXIAL
- Big Boys With Cool Toys
- CASTLE CREATIONS
- DROMIDA
- DU-BRO
- DURATRAX
- DYNAMITE
- ECX
- EXCEL
Component
Part Type
Parts Category
Car and Truck Parts
TRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
TRAXXAS
TRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
TRA4998 Output gear assembly, reverse (26-T)
TRAXXAS
This is the 26 tooth Reverse Output Gear Assembly for the Traxxas T-Maxx4WD Radio Control Monster Truck.This reverse output gear installs on the ou...
View full detailsTRA4997 Output gear assembly, forward (26-T)
TRAXXAS
Traxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...
View full detailsTRA4993 Gear shaft, primary(1)
TRAXXAS
Traxxas Gear Shaft Primary Features: Replaces stock gear shaft. Constructed of steel. Includes: One gear shaft Part Compatibility: Traxxas S-...
View full detailsTRA4992 Drive gear, two-speed (17/22-teeth)/ slipper shaft
TRAXXAS
FEATURES: Replaces damaged or worn 2-speed drive gearsGears are constructed of plastic and pre-installed on steel shaft INCLUDES: One 17 and 22 too...
View full detailsTRA4988 Drive hub assembly, clutch/ 6x8.5x0.5mm PTFE-coated washer (1)
TRAXXAS
This is the Replacement Drive Hub Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.This drive hub assembly fits into the spur gear a...
View full detailsTRA4987 Rings, retainer (snap rings) (14mm) (2)
TRAXXAS
This is the Replacement Pair of 14mm Snap Rings for the Gear Hub Assembly on the Traxxas T-Maxx 4WD Radio Control Monster Truck. These are extra sn...
View full detailsTRA4986 Gear hub assembly, 1st/ one-way bearing/ snap ring
TRAXXAS
Traxxas replacement gear hub assembly for the T-Maxx 4WD Radion Control Monster Truck. This is the replacement gear hub assembly. This gear hub ass...
View full detailsTRA4984 Spur gear, 43-T (1st speed)
TRAXXAS
This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full detailsTRA4973 Tires, Maxx 3.8" (6.3" outer diameter (160mm)) (2)
TRAXXAS
Features: Fits all Traxxas vehicles in the Revo and Maxx seriesIncludes: Two 3.8 Tires and foam insertsRequires: Installing on wheels with Tire Glu...
View full detailsTRA4971 Foam inserts, tire (2)
TRAXXAS
This is the set of Foam Inserts for Traxxas T-Maxx 4WD RTR Monster Truck.These foam inserts fit inside each wheel adding firmness andkeeping the ti...
View full detailsTRA4970 Tires, 3.2" Maxx series (2)
TRAXXAS
This is the set of tires for the Traxxas T-Maxx 4WD monster truck. These tires fit on the wheels of the T-Maxx.Features: Replaces damaged or worn ...
View full detailsTRA4968X LINKAGE, SHIFT
TRAXXAS
This is the Shift Linkage Set for the Traxxas 3.3 T-Maxx.FEATURES:Installs on shift servo and controls shifting of the transmissionINCLUDES:Servo h...
View full detailsTRA4968 Wires: brake, throttle, shift/ servo horns: throttle, brake & shift;ball screw and ball cup (shift shaft)
TRAXXAS
Traxxas throttle brake linkage for the T-Maxx is an assortment of linkage wires for the Traxxas T-Maxx. These wires connect the servos to the engin...
View full detailsTRA4934X Aluminum caps, pivot ball (blue-anodized) (4)
TRAXXAS
Replaces stock silver pivot ball aluminum caps. Constructed of blue aluminum.
TRA4934 Aluminum caps, pivot ball (4)
TRAXXAS
Traxxas 4934 Aluminum Caps Pivot Balls (4pcs) T-Maxx These are the Pivot Ball Aluminum Caps for the Traxxas T-Maxx4WD Radio Control Monster Truck....
View full detailsTRA4923X Chassis braces, lower machined 6061-T6 aluminum (blue) (2)/ hardware
TRAXXAS
This is a pair of Traxxas Machined Aluminum Lower Chassis Braces in Blue with Hardware for the T-Maxx. These aluminum lower braces provide the ulti...
View full detailsTRA4922X Chassis, 7075-T6 billet machined aluminum (4mm) (blue)/hardware
TRAXXAS
TRA4922X Chassis, 7075-T6 billet machined aluminum (4mm) (blue)/hardware
TRA4920X Decal sheets, T-Maxx 3.3 (long wheelbase) (model 4908)
TRAXXAS
FEATURES: Pre-cut easy peel and stick application Sheet contains body trim and various Traxxas T-Maxx 3.3 graphics in white, silver, red and black ...
View full detailsTRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
TRAXXAS
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
TRA4919A Servo mounts, throttle/brake (1) (grey)
TRAXXAS
Traxxas throttle and brake servo mounts for the T-Maxx 3.3 is constructed of gray plastic. Includes: Two servo mounts Specs:Length: 1-3/8" (36mm)Wi...
View full detailsTRA4918A Servo mounts, steering/shift (f&r)(grey)
TRAXXAS
Traxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts Specs:Length: 1-1/2" (38mm)Widt...
View full detailsTRA4918 Servo mounts, steering/ shift (f&r) (black)
TRAXXAS
Traxxas 4918 Servo Mounts Front/Rear This is a pair of Steering or Shifting Servo Mounts for the Traxxas T-Maxx. These mounts are what holds the s...
View full detailsTRA4791 Tires, Pro-Trax mini-spiked 2.2" (rear) (2)
TRAXXAS
TRA4791 Tires, Pro-Trax mini-spiked 2.2" (rear) (2)
TRA4790R Tires, Pro-Trax spiked 2.2" (soft-compound)(rear) (2)/ foam inserts (2)
TRAXXAS
This is a set of two Traxxas Pro-Trax 2.2 Rear Buggy Tires with Inserts. These tires feature a spiked tread design, and soft compound rubber constr...
View full detailsTRA4740 Tires, 2.1" Pro-Trax ribbed (front) (2)
TRAXXAS
TRA4740 Tires, 2.1" Pro-Trax ribbed (front) (2)
TRA4606 Ball bearings (5x8x2.5mm) (8) (for wheels only)
TRAXXAS
Traxxas Ball Bearings 5x8x2.5mm. Features: Standard bearings. Includes: Eight 5mm x 8mm Bearings Requires: Assembly into the model. Specs: Height: ...
View full detailsTRA4580 Box, control
TRAXXAS
This is the replacement EZ start control box for the Traxxas EZ Start. This is the box that attaches to the 6-Cell battery and controls the start o...
View full detailsTRA4570 EZ-Start System, complete
TRAXXAS
Traxxas easy start Starting System for Nitro Vehicles using the Traxxas TRX and TRX PRO Engines such as NITRO SPORT, NITRO RUSTLER, NITRO STAMPEDE,...
View full detailsTRA4533 Cover, receiver
TRAXXAS
This is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck.
TRA4487 Exhaust header, Perfect-Fit for N. 4-Tec, N. Rustler/Sport
TRAXXAS
This is the Traxxas Exhaust Header Set for the Nitro Rustler.This Exhaust Set bolts to the exhaust outlet of the engineand connects to the coupler ...
View full detailsTRA4457A Springs, rear (white) (2)
TRAXXAS
Features:Painted whiteSteel construction Includes:Two springs Technical Specifications:Length: 3.11" (79mm)Inside diameter: .61" (15mm)Outside diam...
View full detailsTRA4452 Tuned pipe, assembled
TRAXXAS
This is a pre-assembled tuned pipe for the Traxxas Rustler.Features: Plastic Construction Pre-Installed Pressure Tap and Wire Mount 90 Degree Rubb...
View full detailsTRA4445 Fuel tank vibration cushion, rubber
TRAXXAS
TRA4445 Fuel tank vibration cushion, rubber
TRA4432A Fuel tank box (holder)/ throttle servo mount (grey)
TRAXXAS
Traxxas fuel tank box, servo holder is constructed of gray nylon. Specs: Length: 88mm (3.47")Width: 101mm (3.98")Height: 28mm (1.10")
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
TRAXXAS
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
TRA4260A ULTRA SHOCKS, SHORT, GREY
TRAXXAS
This is a set of two replacement short gray ultra shocks from Traxxas. Includes part to build two shocks.
TRA4196 Idler gear (20-tooth)/ idler gear shaft
TRAXXAS
This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...
View full detailsTRA4192A Bulkhead (rear) (grey)
TRAXXAS
This is the Rear Grey Bulkhead for the Traxxas Nitro Stampede. Features Sturdy grey nylon construction Includes One rear bulkhead for the Traxxas N...
View full detailsTRA4191 Gearbox halves (l&r)
TRAXXAS
FEATURES: Durable black plastic constructionINCLUDES: One left gear box half One right gear box halfREQUIRES: Two 3x20mm round head machine screws ...
View full detailsTRA4183 Throttle & brake rods/ brake lever
TRAXXAS
These are Replacement Throttle and Brake Rod for the TraxxasGas Powered Stampede.FEATURES:Steel ConstructionINCLUDES:One Straight Rod with Z BendOn...
View full detailsTRA4174 TRX Pro-Star chrome wheels (2) (front) (for 2.2" tires)
TRAXXAS
These cool, 5-spoke chrome wheels can be used to replace the dished wheels on older models. The TRX Pro-Star wheels feature a chrome-less gluing su...
View full details