Filters
Accessories
Brand
Capacity
Component
Level
Model
Part Type
Parts Category
Sensored
Type
Voltage
ALL TRAXXAS
TRA6937 Steering Blocks (Left&Right):NHRA
TRAXXAS
These are the Left and Right Steering Blocksused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, black in ...
View full details
TRA5241 SCREW IDLE SPEED, TRX 2.5
TRAXXAS
This is a replacement Idle Mixture Screw for theTraxxas TRX 2.5 Carb (TRAG5252).FEATURES:Pre-installed gasketINCLUDES:One NeedleSPECS:Length: 13.8 ...
View full details
TRA4341 TIE-ROD SET 4-TEC (8)
TRAXXAS
This is the replacement tie-rod set for the Traxxas 4-Tec. This set includes steering and camber links.Features: Black nylon rod ends and Steel stu...
View full details
TRA4968X LINKAGE, SHIFT
TRAXXAS
This is the Shift Linkage Set for the Traxxas 3.3 T-Maxx.FEATURES:Installs on shift servo and controls shifting of the transmissionINCLUDES:Servo h...
View full details
TRA3993X INPUT SHAFT/DRIVE GEAR
TRAXXAS
Input shaft/ drive gear assembly, lightweight (18/ 13-tooth top gear) (hard-anodized/PTFE-coated 7075 T6 aluminum gears)
TRA4850 SUSPENSION ARMS REAR
TRAXXAS
Traxxas left and right rear suspension arms are constructed of black plastic. Includes: Two suspension arms. Specs: Length: 62.0mm (2.443")Width: 3...
View full details
TRA7335 Front Bumper/Bumper Mount: 1/16 Rally
TRAXXAS
This is the front bumper and mount for the Traxxas 1/16 scale Rally VXL.Features: Black plastic constructionIncludes: One Mount and BumperRequires:...
View full details
TRA4375 ADAPTERS WHEELS
TRAXXAS
Traxxas Wheel Adapter Features: Allow the use of Aftermarket Wheels to be Used. Includes: Four Wheel Adapters Part Compatibility: Traxxas Nit...
View full details
TRA7788 Slipper pressure plate and hub
TRAXXAS
This is a slipper pressure plate and hub for the Traxxas X-Maxx Monster Truck. Features: Cast metal construction Installs on transmission input sh...
View full details
TRA7786 Input shaft, transmission (slipper shaft)
TRAXXAS
FEATURESHardened steel constructionSplined to hold the pressure plate, slipper clutch and spur gearassemblies in place INCLUDESTransmission Input S...
View full details
TRA7668G Wheel nut washer, machined aluminum, green/3x12mm CS (4)
TRAXXAS
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
TRA7668 Wheel nut washer, machined aluminum, blue/3x12mm CS (4)
TRAXXAS
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Blue colored Made of aluminum For the LaTrax Te...
View full details
TRA7622 Prerunner Chassis (long)
TRAXXAS
This is the Long Chassis for the Traxxas 1/18 LaTrax Desert Prerunner. Includes: (1) Chassis
TRA7539 Camber rods, 2-degree/3-degree (6 each)
TRAXXAS
This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
TRA7522 Latrax Rally Chassis
TRAXXAS
Traxxas 7522 Latrax Rally ChassisThis is the Chassis for the Latrax Rally Car from Traxxas.FEATURESMolded fiber composite constructionINCLUDESChass...
View full details
TRA7424 Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2)
TRAXXAS
Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2) Sealed receiver box for vehicles equipped with the low-CG 4X4 cha...
View full details
TRA7423 Nerf bars, chassis (2)
TRAXXAS
This is the Traxxas pair of Nerf Bars for the 1/10 scale Rally VXL, (2).Features: Black colored Made of plastic For the Traxxas Rally VXL Include...
View full details
TRA7285 LED light kit, 1/16th Summit (power supply, chrome lightbar, roof light harness (4 clear, 2 red), chassis harness (4 clear, 2 red), wire ties, mounts)
TRAXXAS
This is an optional Traxxas Complete LED Light Kit. Package includes the power supply, chrome lightbar, wire ties, mounts, 2-red/4-clear roof light...
View full details
TRA7274 Tires and wheels, assembled, glued (Geode chrome, blue beadlock style wheels, Canyon AT tires, foam inserts) (1 left, 1 right)
TRAXXAS
This is a pair of Canyon AT 2.2" Tires with foam inserts mounted on Geode Chrome, Blue Beadlock Wheels from Traxxas. Features: Canyon AT tires ...
View full details
TRA7245A Spring, shock (nickel finish) (GTR) (2.925 rate, blue) (1 pair)
TRAXXAS
This is a pair of blue rate springs for the GTR shocks used on the Traxxas Gravedigger off-road truck.Features: Steel construction with nickel fin...
View full details
TRA7220 ExoCage, 1/16th Summit (includes mounting hardware)
TRAXXAS
This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 Summit...
View full details
TRA7175 Tires & wheels, assembled, glued (white dished 2.2" wheels, Response Pro 2.2" tires, foam inserts) (2)
TRAXXAS
TRA7118 Push rod (molded composite) (red) (4)/ hollow balls (8)
TRAXXAS
These are the pushrods and hollow balls for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Molded composite construction that’s red in colorI...
View full details
TRA7066 Body, GTR shock (molded composite) (2)
TRAXXAS
Traxxas shock bodies for use on the GTR Shocks. Constructed of black molded composite material.Requires: Installing all shock components into shock...
View full details
TRA7051X Driveshaft, steel constant-velocity (assembled) (4)
TRAXXAS
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation.The U-joint pins are held captive by a h...
View full details
TRA6874R Tires & wheels, assembled, glued (2)
TRAXXAS
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
TRA6872 Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile
TRAXXAS
This is a pair of SCT Split Spoke Wheels in Black from Traxxas.FEATURES:Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slas...
View full details
TRA6759 Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4).
TRAXXAS
These are the Traxxas Heavy Duty External and Internal Splined Half Shafts with metal U-Joints for the Telluride 4x4.Features: Black and silver/gr...
View full details
TRA6756 Driveshaft, center, plastic (blue)/ screw pin
TRAXXAS
This is the Center Driveshaft for the Traxxas 1/10 scale Telluride 4x4.FEATURES:Plastic construction, blue in colorINCLUDES:Center Driveshaft with ...
View full details
TRA6752 Half shaft, external splined (steel-spline constant-velocity)
TRAXXAS
Traxxas External Splined Half Shaft. This is the male end half shaft that works with the CVD type driveshafts. Package includes one half shaft.
TRA6580 Sound output module, on-board audio system
TRAXXAS
This is a replacement On-Board Audio System Sound Output Module from Traxxas. Includes: (1) Sound Output Module
TRA6542X Flywheel (large, knurled for use with starter boxes)
TRAXXAS
This is the Large Knurled Flywheel from Traxxas.FEATURES:Enables Traxxas glow powered vehicles to be started with a starter boxAluminum constructio...
View full details
Save 45%
TRA6524 Sensor, temperature & voltage (fits XO-1)
TRAXXAS
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...
View full details
TRA6466 Input shaft (cush drive)/ pin
TRAXXAS
This is the Input Shaft/ PinFor the Traxxas Cush drive outputFEATURES:Steel constructionINCLUDES:One input shaftOne pinCOMMENTS:This part is for th...
View full details
TRA6461 Motor adapter/ GS 3x30mm
TRAXXAS
Traxxas Motor Adapter/GS 3x30mm XO-1 Features: Metal construction, blue colored Includes: One motor adapter
TRA6460 Motor mount.
TRAXXAS
Traxxas Motor Mount XO-1 Features: Aluminum construction, anodized blue in color Includes: Motor Mount with Instruction Sheet Fits: Traxxas XO-1
TRA6457 Center bearing carrier/ bushings (2)
TRAXXAS
Traxxas Center Bearing Carrier/Bushings XO-1 (2)
TRA6456 Driveshaft, center, 6061-T6 aluminum (blue-anodized)
TRAXXAS
This is a Traxxas 6061-T6 Aluminum Center Driveshaft for the XO-1.
TRA6455 Axle carriers, rear, 6061-T6 aluminum, left & right (blue-anodized)
TRAXXAS
This is a replacement Traxxas Aluminum Rear Axle Carrier Set, and is intended for use with the Traxxas X0-1.
TRA6432 Splitter extension (universal)/ 3x10mm CC (2)
TRAXXAS
This is the Splitter Extension for the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Molded plastic constructionINCLUDES:Splitter Extension with two ...
View full details