Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full details
Top drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full details
Silicone diaphragms (4) Silicone diaphragms (4) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis 4-Tec...
View full details
Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft) X-Maxx® drive cup with 3x8 mm set screw. For use with 8s-spec heavy duty driveshaft ...
View full details
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full details
Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear) Heavy-duty 11-tooth rear differential pin...
View full details
Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...
View full details
Suspension pin retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. Replacement part for these model...
View full details
Spur gear, 50-tooth 50-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full details
Heat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full details
The Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles. ...
View full details
This is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full details
This is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full details
Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the ...
View full details
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no...
View full details
Spur gear, 60-tooth 60-Tooth spur gear. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help ...
View full details
FEATURESSteel construction, white in colorDab of paint on end of spring indicates compression rateINCLUDESTwo Long 0.892 Blue Rate GTR Shock Spring...
View full details
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full details
This is the Traxxas Splined 17mm Wheel Wrench.Features: Black colored Made of nylon Compatible with the 17mm splined nuts used on many Traxxas veh...
View full details
Traxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...
View full details
This is a bottle of Traxxas Differential Oil. This differential oil can be used for a variety of vehicle types. The thicker the oil, the less your ...
View full details
TRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full details
Bulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2)) Rear upper and lower X-Maxx...
View full details
Nerf bars, chassis (black) Pair of black chassis nerf bars Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Fo...
View full details
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full details
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full details
Screws, 3x10mm countersunk machine (6) (hex drive) 3x10 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full details
Traxxas Premium Shock Oil (40 wt) Traxxas premium 40 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...
View full details
This is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full details
Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip Battery hold down and hold down retainer with battery post, ...
View full details
Battery, Power Cell, 1800mAh (NiMH, 6-C flat, 7.2V) Traxxas Power Cell NiMH battery packs provide excellent “punch” at an affordable price. Low-res...
View full details
Screws, 4x12mm countersunk machine (hex drive) (6) 4x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Carriers, stub axle (rear) (2) Standard rear stub axle carriers (2) Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full details
Heavy-Duty Chassis Brace Designed for the Extreme The heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG chassis and all R...
View full details
This is the Fox Edition Body for the Traxxas Slash and Slash 4x4.FEATURES:Molded plastic constructionTrimmed and painted with decals appliedBlack a...
View full details
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full details
Shock shafts, steel, chrome finish (long) (2) Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2). Replacement pa...
View full details
High-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx© Tough! The Traxxas Maxx redefines speed, durability and toughness with its innova...
View full details
This is the Traxxas Battery Hold-Down with Tall Retainers for the 1/10 scale Rally VXL and Slash LCG.Features: Black colored Made of plastic For t...
View full details
Suspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full details
Traxxas Pro Scale Led Light Set for the Ford Bronco2021 High Beam Reverse Lights Brake Lights Turn Signal & Hazards Includes: (1)...
View full details
Wheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
Body mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full details
