This is the Traxxas Receiver Box and Cover for the Traxxas Funny Car.Features: Black colored Plastic construction For the Traxxas Funny Car Inclu...
View full details
Sold out
Traxxas rear drive belt for the Nitro 4-Tec 3.3 is made of rubber and black in color INCLUDES: One rear drive belt
This is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full details
This is a set of two optional aluminum idler gear shafts from Traxxas. These idler shafts support the idler gears inside the transmission.
Traxxas Exo-Carbon Wing Ford Fiesta Features: Mounts to rear of body to control downforce during high speed Includes: Exo-Carbon Wing with Mount...
View full details
This is the Traxxas Right/Left Rear Suspension Link Mount for the Traxxas Funny Car.Features: Black colored Plastic construction For the Traxxas F...
View full details
Traxxas rear shock tower replaces damaged shock towers. Constructed of hardened plastic. Two mounting holes per side for different damping rates. I...
View full details
This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSk...
View full details
FEATURESOutside U-joint is lubricated and sealed by a rubber boot toprotect it from dirt and grimeU-joint pins are held captive by the ball bearing...
View full details
This is the optional Traxxas 1/16 Grave Digger 4WD Conversion Kit. This kit includes the parts and hardware necessary to convert your 1/16 Grave Di...
View full details
Features:Metal and black plastic constructionAssembled, with ball joints Includes:Two upper suspension armsTwo lower suspension arms
Cylinder sleeve/ piston (w/ oil ring ) (matched set) Replacement part for these models: TRX® Pro .15
Traxxas package of two front and rear toe links are constructed of green composite material. For the 1/16 Slash and E-Revo. Fits: Traxxas 1/16 Ral...
View full details
FEATURESSteel constructionINCLUDESTwo Shock SpringsSPECIFICATIONSLength: 6.2" (158mm)Inner Diameter: 1.13" (28.8mm)
This is the center driveshaft for the Latrax SST Stadium Truck.Features: Aluminum constructionIncludes: Center Driveshaft 1.5 x 8mm Steel Pin
Traxxas 7569 LaTrax Rally Wheel Hubs Hex (Disc Brake Rotors) (4)These are the Wheel Hubs for the Latrax Rally Car from Traxxas.FEATURESFor front an...
View full details
This is a replacement LaTrax Front and Rear Suspension Pin Retainer. Package includes one front pin retainer, and one rear pin retainer. Features: ...
View full details
This is a replacement LaTrax Front & Rear Suspension Arm Set. Package includes four suspension arms that can be used in either the front or rea...
View full details
This is an optional LaTrax Carbon Fiber Conversion Kit, intended for use with the LaTrax 1/18 Rally Car. This kit includes the carbon fiber chassis...
View full details
This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, gl...
View full details
These are the Traxxas GTR XX-Long Tin-Coated Shafts for the Slash 4x4 Platinum.Features: Brass colored Tin-Coated Made of metal For the Traxxas Sl...
View full details
This is the Body Bumper Foam for the Traxxas 1/10 scale Rally Race Car TRAD74**FEATURES:Foam construction, black in colorInstalls on chassis undern...
View full details
These are the GTR Shock Springs for use on theTraxxas 1/16 Slash VXL 4WD RTRFEATURES:Steel constructionRed in colorDouble green0.88 rateINCLUDES:Tw...
View full details
These are the front and rear toe links for the Traxxas Grave Digger off-road truck.Features: Molded composite plastic construction that is green in...
View full details
This is the white wing and decal sheet for the 1/16 Traxxas E-Revo and E-Revo VXL. Features: Nylon construction White in color Includes: (...
View full details
Traxxas differential gear set for use on the 1/16 E-Revo and Slash VXL Vehicles. Constructed of steel. This package includes; Two Output GearsThree...
View full details
This is a pair of SCT off-road racing tires, foam inserts mounted on SCT satin chrome, red beadlock style wheels from Traxxas. Features: SCT sa...
View full details
These are the assembled stub axles and yokes for use on the Traxxas 1/16 E-Revo VXL and Slash vehicles.Features: Steel constructed axles that’s bla...
View full details
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series.FEATURES:Nylon and rubber constructionINCLUDES:Two Diff Gear CoversTwo L...
View full details
This is the Sway Bar Wires Set for the Traxxas Slash 4x4FEATURES:Steel constructionBlack and silver for soft and hardINCLUDES:2 front sway bars2 re...
View full details
This is a set of two Traxxas Progressive Rate Front Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjus...
View full details
This is the Traxxas Fiberglass Go-Pro Camera Mount and is intended for use the Traxxas Slash 4x4. Traxxas makes it easy to capture exciting first-p...
View full details
These are the Traxxas Front/Rear Plastic Non-Adjustable Camber Links for the Telluride 4x4.Features: Grey colored Made of tough plastic Fits the f...
View full details
Traxxas changed the game with Telemetry allowing you to monitor and record real-time data from your vehicle. By combining the water-sealed Telemetr...
View full details
This is the Splitter MountFor the Traxxas 1/7 X-1 4WD On-Road Supercar TQi/2.4GHz RTR (TRAD45**).FEATURES:Made of a black composite materialINCLUDE...
View full details
Includes: (2) Battery Hold Down Retainers Replacement Part For: XO-1® (Model# 64077-3)
Rear Bumper, Rear Brace: Slayer This is the Rear Bumper for theTraxxas Slayer Pro 4WD Short Course Nitro RTR Features Nylon constructionBlack in co...
View full details
Traxxas optional upper/lower front suspension arms for the Traxxas Slayer Pro. Constructed of black composite plastic. Left front for Slayer 4x4 Pr...
View full details
These are the optional aluminum push rods for the Traxxas Slayer Pro 4WD Short Course Nitro RTR.Features: Aluminum construction with Nylon rod ends...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front a...
View full details
Traxxas pair of rear springs are constructed of white steel. Specs: Length: 71mm (2.8")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56"...
View full details
This is the rear bumper and mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck.Features: Nylon construction that is black in colorInclu...
View full details
