This is a set of two optional Pink Aluminum Stub Axle Carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
These are the Traxxas Assembled Glued Slick Tires and 12-Spoke Blue Wheels for the LaTrax Rally Car.Features: Black and Blue colored Premounted sl...
View full details
This is the Traxxas pair of White GTR Long Spring Shocks with an Orange Compression Rating, 0.623 (2). These Spring Shocks fit the Traxxas Slash 4x...
View full details
This is a replacement Traxxas Finned 550 Motor Mount, and is intended for use with the Traxxas 1/16 Summit. Features: Factory Replacement Part Alu...
View full details
Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks) The GTR shock rebuild kit ...
View full details
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right Includes: (...
View full details
This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...
View full details
This is the rear suspension arm set for use on the Traxxas 1/16 Slash VXL 4WD RTR.Features: Nylon construction that is black in colorIncludes: Low...
View full details
This is the Center Diff Housing for the Traxxas Slash 4X4 and 4X4 Platinum.Features: Black nylon, aluminum and steel constructionIncludes: Two hou...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
This is a Traxxas 52T, 32P Spur Gear for use on the centerDifferential of the Slash 4X4. Features M0.8 pitch52 toothBlack plastic constructionCompa...
View full details
This is the optional tall battery hold down retainer for the Traxxas XO-1 on-road car.Features: Allows the installation of taller multi-cell batter...
View full details
Traxxas Body Mount Posts XO-1 (2) Features: Black colored Includes: Two mount posts Two post pivots Two screw pins Fits: Traxxas XO-1 Traxxas ...
View full details
This is the gray Nylon chassis for the 2WD Traxxas Slash.Features: Gray composite nylon constructionIncludes: One chassis for the Traxxas SlashRequ...
View full details
This is the rear LED lights harness for use on the Traxxas Summit Truck RTR.Features: JST ConnectorIncludes: Rear Harness Six RED LED Lights Three...
View full details
This is a set of center harness lights, intended for use with the Traxxas Summit Monster Truck.
This is the center half shaft set for the Traxxas E-Revo.Features: Plastic construction that’s black in colorIncludes: Center half shafts (three in...
View full details
This is the front bumper and mount for the Traxxas Summit.Features: Black plastic with mounting hardwareIncludes: Front bumper and mountRequires: I...
View full details
This is an optional Traxxas Center Differential Kit, and is intended for use with the Traxxas E-Revo and E-Maxx trucks. The Traxxas center differen...
View full details
These are the left and right gearbox halves for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorIncludes: On...
View full details
Traxxas Front Upper & Lower Bulkheads Jato Features: Nylon Construction Black in Color Includes: One Front Upper Bulkhead One Front Lower Bu...
View full details
The Traxxas Revo front and rear sway bar kit is a must have for Revo racers everywhere. The kit was created, developed, and extensively field teste...
View full details
Traxxas Resonator aluminum tuned pipe for Revo is specifically engineered to fit right in the chassis and compliment Revo's TRX 2.5R and 3.3R racin...
View full details
This is a pair of 5.4 rate (pink) shock springs for the Traxxas Revo.Features: Metal construction that’s red in color (small pink square indicates ...
View full details
This is a pair of Red 4.4 Rate Black GTR shock springs from Traxxas. The springs use high-quality spring steel with durable powder-coated finishes....
View full details
This is a pair of 3.8 rate (gold) shock springs for the Traxxas Revo.Features: Metal construction that’s red in color (small gold square indicates ...
View full details
Traxxas replacement center wing mount for the optional Traxxas Revo series wing mount set. Constructed of black composite nylon. Replaces a worn or...
View full details
This is the Fuel Cap Pull Ring/Shut-Off Clamp set for the Traxxas Revo.FEATURES:Plastic constructionSimple, squeeze-clamp restricts fuel line for e...
View full details
These are the Front and Rear Blue Aluminum Bulkhead Tie Barsfor the REVO from Traxxas.FEATURES:Blue anodixed aluminum (2.5mm thick)INCLUDES:One fro...
View full details
FEATURES: Plastic construction Black in color INCLUDES: One Air Filter Housing One Foam Insert Element One Rubber Filter Base One Cable Tie SPECS: ...
View full details
This is a replacement flywheel nut from Traxxas.Features: Metal construction Used on the Traxxas TRX 2.5. engine Includes: Flywheel Nut
These are replacement cooling head protectors for the Traxxas 2.5 Engine. These attach to the top of the cooling head.Features: Black nylon constru...
View full details
TRA5215 Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm eclip(requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
These are the wheelie bar wheels for the Traxxas 3.3 T-Maxx.Features: Constructed of hard plastic Axles constructed of steel Includes: Four wheel...
View full details
Bumper Mounts,FR & R:EMX,TMX,2.5,3.3 This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.These mounts attach the bum...
View full details
This is a package of 3X20mm Flat Head Countersunk Hex Screws by Traxxas.FEATURES:Flat head countersunk screw with a hexagon drive insertINCLUDES:Si...
View full details
This is a replacement fuel tank for the Traxxas Nitro Rustler Stadium truck kitFeatures:Clear plastic, flip-top style tank for glow fuel only.Nippl...
View full details
Traxxas Shoulder screws, 3x10mm (6) (with threadlock)
The extended quick release battery hold downs for E-Maxx® make it easy to install small or large format, multi-cell battery packs. Stock E-Maxx hol...
View full details
This is the replacement battery hold down set for the Traxxas E-Maxx.Features: Black nylon construction Adhesive backed foam strips Fits standard ...
View full details
Turnbuckles, aluminum (red-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow balls)/wrench Traxxas’ alu...
View full details
Traxxas Seal Kit Rx Box Features: Properly seals receiver box to minimize dirt and moisture exposure Includes: Silicone grease One Gasket Two Fo...
View full details
This is a replacement Traxxas ESC/Receiver Mounting Plate, intended for use with the installation of the Traxxas XL-5 or XL-10 Electronic Speed Con...
View full details
Screws, 2.5x6mm cap-head machine (hex drive) (6) Set of six 2.5x6 mm cap-head machine screws with hex-drive heads Replacement part for these mode...
View full details
