Filters
Accessories
Brand
Capacity
Component
Level
Model
Part Type
Parts Category
Sensored
Type
Voltage
ALL TRAXXAS
TRA4142X FLYWHEEL LARGER KNURLED(SET)
TRAXXAS
This new, light weight, silver anodized machined aluminum flywheel is 40mm in diameter, perfect for using a starter box with the Revo & Slayer....
View full details
TRA5288 CRANKSHAFT, IPS: TRX 3.3 W/STARTER
TRAXXAS
This is the Crankshaft w/IPS for the Traxxas 3.3racing engine with starter, TRAG5407.FEATURES:Steel ConstructionIPS (Integrated Pilot Shaft)INCLUDE...
View full details
TRA7789 Rebuild kit, slipper clutch (steel disc/friction insert (1)/spring (1)/2.5x12mm pin/4.0mm NL(1))
TRAXXAS
This is a slipper clutch rebuild kit for the Traxxas X-Maxx Monster Truck. Features: Restores like-new performance to worn or damaged slipper clut...
View full details
TRA7719 Battery hold-down (2)/ foam pad (2)
TRAXXAS
This is a set of Traxxas Battery Hold Down and Foam Pads.Features: Molded composite plastic construction with thin foam strip to cushion battery H...
View full details
TRA7711X Body, X-Maxx, ProGraphix (graphics are printed, requires paint & final color application)/ decal sheet
TRAXXAS
This is a Traxxas Body X-Maxx ProGraphix Body Decal Sheet. Add some style to your Traxxas X-Maxx with this ProGraphix body and decal sheet. The gra...
View full details
TRA7665 Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/springs) (4)/
TRAXXAS
This is a set of four Traxxas GTR Hard Anodized Shocks with Springs for the LaTrax Teton. These aluminum shocks are rugged and will give you superi...
View full details
TRA7445 Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)
TRAXXAS
This is the set of Traxxas Long GTR Shock Springswith 0.810 Pink Compression Rate.FEATURES:Steel construction, white in colorDab of paint on end of...
View full details
TRA7073 Tires and wheels, assembled, glued
TRAXXAS
These are the SCT right and left off-road tires and wheels for use on the Traxxas 1/16 Slash VXL 4WD RTR. Features: Assembled and glued SCT satin ...
View full details
TRA7028 Hollow balls (20)
TRAXXAS
These are the hollow balls for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black in colorIncludes: T...
View full details
TRA6873R Tires & wheels, assembled, glued
TRAXXAS
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
TRA6838 Shock tower, rear
TRAXXAS
Features:Hardened plastic constructionBlack in colorIncludes:One rear shock towerRequires:Installation on chassisTechnical Specifications:Length: 8...
View full details
TRA6823R Bulkhead tie bars, front & rear, aluminum (red-anodized)
TRAXXAS
This is the Traxxas set of Aluminum Anodized Front/Rear Bulkhead Tie Bars. These Front/Rear Bulkhead Tie Bars are red colored and compatible with t...
View full details
TRA6732 Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
TRAXXAS
Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3x18mm BCS (4) Left and right front suspension arm guards with spacers (2),...
View full details
TRA5881 Tires & wheels, assembled, glued (SCT satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front)
TRAXXAS
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
TRA5835 Bumper, front/ bumper mount, front (black)
TRAXXAS
This is the front bumper and mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck.Features: Nylon construction that is black in colorIncl...
View full details
TRA5690X Plate, motor (for single motor installation, use with gear cover #5677X)
TRAXXAS
This is an optional Traxxas Single Motor Motor Plate, and is intended for use with the Traxxas E-Revo model 5605. Traxxas makes it easy to convert ...
View full details
TRA5660 Motor mount, finned aluminum
TRAXXAS
Traxxas motor mount is constructed of silver aluminum. Replaces damaged motor mount. Requires: Motor Mount Hinge Post Specs:Length: 58.2mm (2.29")W...
View full details
TRA5576A Wheels, All-Star 2.8" (black chrome) (nitro rear/ electric front)
TRAXXAS
These are the All-Star 2.8 black chrome wheels for the Traxxas Stampede and Rustler.Features: Black chrome wheelsIncludes: Two All-Star 2.8 black c...
View full details
TRA5538 Turnbuckles, toe-links, 61mm (front or rear) (2) (assembled with rod ends and hollow balls)
TRAXXAS
These are the 61mm front turnbuckles for the Traxxas Nitro Jato Stadium Truck.Features: Metal and nylon construction that’s black and silver in co...
View full details
TRA5463T Shaft, GTR shock TiN-coated (2)
TRAXXAS
This is a pair of shock shafts for the Revo type GTR shocks from Traxxas.Features: Constructed of steel and threaded on both ends TiN coated for s...
View full details
TRA5442 Spring, shock (red) (GTR) (4.9 rate silver) (std. front 120mm) (1 pair)
TRAXXAS
This is a 4.9 Silver (light) rate shock spring for the Traxxas Revo.Features: Steel construction Painted red with small silver stripe 4.9 tension ...
View full details
TRA5397 OptiDrive sensor assembly/ 2.5x6mm CS (2)
TRAXXAS
This is a replacement opti-drive sensor assembly for the Traxxas Revo monster truck. This is the sensor that attaches to the transmission and deter...
View full details
TRA5351X T-Maxx Torque Control Slipper Upgrade Kit (fits firstgeneration T-Maxx transmission, w/o Optidrive) (patentpending)
TRAXXAS
The Revo©-Spec Torque-Control slipper clutch upgrade kit fits T-Maxx¶© Classic, S-Maxx, and SportMaxx trucks equipped with the original T-Maxx styl...
View full details
TRA5341 Linkage, steering (Revo 3.3) (3x50mm Turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4)
TRAXXAS
Linkage, Steering: Revo 3.3,SLY This is the Steering Linkage for the Traxxas Revo 3.3. Features Connects between servo horns and steering arms Incl...
View full details
TRA5326X Cover plate, steering servo/ 3x8 BCS (4)
TRAXXAS
This is the Traxxas steering servo cover plate for the Traxxas Revo 3.3.Features: Nylon construction that is black in colorIncludes: One Steering S...
View full details
TRA5214 Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm eclip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)
TRAXXAS
This is the Clutch Bell with Washer and E-Clip for the Revo FEATURES: Metal construction Five cooling holes on the face of bell (bellow the teeth) ...
View full details
TRA5182 Ball bearings, blue rubber sealed (20x27x4mm) (2)
TRAXXAS
These are the 20x27x4mm ball bearings for use on the Traxxas Summit Truck RTR.Features: Steel construction that is rubber sealedIncludes: Two Ball ...
View full details
Save 50%
TRA5131R Suspension arms (upper) (2) (fits all Maxx series)
TRAXXAS
These are the upper suspension arms for the T-Maxx 3.3.Features: Fastens to bulkhead and helps to support axle carriers Black in color that’s cons...
View full details
TRA4929R Bulkheads (l & r) (rear) (grey)
TRAXXAS
Traxxas left and right rear bulkheads for the T-Maxx 3.3 fastens to rear skidplate and holds rear diff in place. Constructed of hardened plastic IN...
View full details
TRA4612 Ball bearings (10x15x4mm) (2)
TRAXXAS
This is a pair of ball bearings by Traxxas. Ball Bearings help to reduce friction on your vehicle.Features: Stainless steel construction that’s sil...
View full details
TRA3996X Idler gear, 20-tooth/ idler gear shaft
TRAXXAS
This is the replacement 20-tooth idler gear and shaft for the Traxxas E-Maxx 4WD RTR.Features: Steel construction that’s gun metal in color Replac...
View full details
TRA3139 Turnbuckles (62mm) (front tie rods) (2)
TRAXXAS
Turnbuckles (62mm) (front tie rods) (2) Pair of 62 mm turnbuckles (front tie rods) Replacement part for these models: Bigfoot® Officially Licens...
View full details
TRA2577X Screws, 3x10 button-head machine (hex drive) (stainless steel)(6)
TRAXXAS
Screws, 3x10 button-head machine (hex drive) (stainless steel)(6)
TRA2524 Screws, 2.5x8 countersunk machine (hex drive) (6)
TRAXXAS
Screws, 2.5x8 countersunk machine (hex drive) (6)
TRA1952A Carriers, stub axle (red-anodized 6061-T6 aluminum)(rear)(2)
TRAXXAS
Carriers, stub axle (red-anodized 6061-T6 aluminum)(rear)(2)
TRA1937 Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)
TRAXXAS
Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)
TRA9595 Traxxas Sway bar kit, Sledge (front and rear) (includes front and rear sway bars and linkage)
TRAXXAS
TRA9595 Traxxas Sway bar kit, Sledge (front and rear) (includes front and rear sway bars and linkage)
TRA9537 Traxxas Steering blocks, left & right/ M4x0.7 NL (4)
TRAXXAS
TRA9537 Traxxas Steering blocks, left & right/ M4x0.7 NL (4)
TRA8999X Traxxas Suspension arms, lower, blue (L/R, F/R) (WideMAXX kit)
TRAXXAS
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
TRA8917T Traxxas Skid plate, roof (body) (orange)/ 3x12mm CS (4)
TRAXXAS
This is a replacement Traxxas Maxx Roof Skid Plate, intended for use with the Traxxas Maxx kit. This skid plate is made from plastic material and a...
View full details
TRA8610 Traxxas Body reinforcement set (fits #8611 body)
TRAXXAS
This is a factory replacement Set of Body Reinforcements from Traxxas intended for use with the E-Revo Body: TRA8611. Features:Factory Replacemen...
View full details
TRA8946 Traxxas Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)
TRAXXAS
Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2) Steering bellcranks with support, se...
View full details
TRA6832G Traxxas Aluminum Caster Block Set (2) (Green)
TRAXXAS
This is a pair of Traxxas Aluminum Left/Right Caster Blocks (C-Hubs) in Green. Fits the following models:Ford Fiesta ST RallySlash 4X4 PlatinumSla...
View full details