TRA4147 Nuts, 5mm nylon locking (8)
TRAXXAS
Nuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®
Nuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®
Spur gear, 68-tooth (0.8 metric pitch, compatible with 32-pitch) 68-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
This is a 4x14mm Button Head Screw Set for the Traxxas Revo vehicle. Features Steel constructionBlack in colorLow-profile, button-head designHex dr...
View full details
Screws, 3x25mm button-head machine (hex drive) (6)
Screws, 4x12mm countersunk machine (100-degree) (6)
Body, LaTrax® Desert PreRunner (clear, requires painting)/ decals From mild to wild, Traxxas clear bodies are your own personal canvas. You choos...
View full details
Just like the Traxxas heavy-duty suspension arms, X-Maxx green roof skid plates use our toughest composite material. Whether you’re sending it at t...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
This is the Torque Biasing Center Drive and Ball Bearings for the Traxxas X-Maxx. Features Improves Driveline Durability Drives Larger Module ...
View full details
This is the Traxxas Unlimited Desert Racer Lower Left Suspension Arm with Insert and Pre-Installed Hollow Ball.Stock Replacement OnUnlimited Desert...
View full details
Suspension arms, front (right), heavy duty (upper (1)/ lower (1)) Heavy-duty E-Revo® suspension arms utilize our latest proprietary composite mat...
View full details
Ball bearing, black rubber sealed (20x27x4mm) (2) Pair of 20x27x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
All-Star black chrome wheels, paddle tires, foam inserts,electric rear (2) TSM rated.
This is a set of replacement Traxxas Caster Blocks intended for the 4-Tec 2.0. Features:Nylon/Plastic Construction Includes: (2) Caster Blocks (4)...
View full details
This is the inner driveshaft assembly for the VXL from Traxxas.Features: Plastic constructionIncludes: Inner Shaft assembly and M2x8 Screw PinRequi...
View full details
This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soo...
View full details
These are the optional aluminum push rods for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR.Features: Aluminum construction that’s anodized ...
View full details
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles.Features: Plastic construction Allows installation and removal of the receiver wi...
View full details
SHOCK TOWER, FRONT Replacement front shock tower Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Rally Slash 4X4 Ultim...
View full details
This is the Traxxas Gear, 29-T pinion (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft)/ set screw. This is Traxxas part number 6492Part Num...
View full details
Traxxas TRA5853X 17mm wheels hubs set is constructed of anodized blue aluminum.This is the new Traxxas 17mm wheel hub kit for the Traxxas Slash, St...
View full details
These are the tall front and rear body mount posts for use on the Traxxas Summit Truck.Features: Nylon construction this is black in colorIncludes:...
View full details
This is the rocker arm set progressive 2 (90-T) for the REVO from Traxxas.Features: Durable gray nylon constructionIncludes: An eight piece Rocker...
View full details
This is the steel suspension pin set for the Traxxas Revo. They are also commonly known as hinge pins.Features: Steel construction with a polished ...
View full details
6x10x12 Roller Clutch One-way starter bearing for the TRX® Pro.15 nitro engine Replacement part for these models: TRX® Pro .15
Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Sealed receiver box for Traxxas micro receivers....
View full details
Screws, 3x12mm roundhead self-tapping (6)
Screws, 4x18mm countersunk machine (hex drive) (6)
Tires & wheels (Tracer 2.2" chrome wheels, Anaconda 2.2" tires with foam inserts)
Camber link set for Bandit (grey) (plastic/ non-adjustable)
Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel Replacement hardened-steel internal gears for 2...
View full details
Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (4) The front and rear har...
View full details
Traxxas Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx V2 with extended chassis (352mm wheelbase))
Shock shafts, hardened steel, titanium nitride coated (long) (2) These hardened steel shafts have a super tough titanium nitride coating with a mi...
View full details
Traxxas Captured Shock Spring Retainers. These optional spring retainers are a great upgrade to help support the shock springs found on the Traxxas...
View full details
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth steel spur gear (32-pitch) fits the...
View full details
TRA3945X 15 Tooth Heavy Duty Pinion Gear 32 Pitch Accessory part for these models: E-MaxxE-RevoSlash 4X4 UltimateSlash 4X4Stampede 4X4 VXLStampede ...
View full details
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you ...
View full details
Wheel hubs, hex, steel (4) Steel hex wheel hubs fit with greater precision and deliver slip-proof performance with their splined-hex design. Sold ...
View full details
TRA3045R Electronic Speed Control LaTrax Waterproof Electronic Speed Control, LaTrax, waterproof (assembled with bullet connectors)
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) ...
View full details
Tires & wheels, assembled, glued (Geode chrome wheels, paddle tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #535...
View full details
This is a replacement Traxxas 39 Tooth TRX-4 Spur Gear.
Traxxas cooling head gasket measures 0.30mm stock thickness head gasket, use thicker gasket for fuels with high nitro content and thinner gasket fo...
View full details
This is a pair of Traxxas Pinion Gear Differentials for the LaTrax Rally Car.Features: Black colored Made of plastic For the LaTrax Rally Car Inc...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS