Spur gear, 45-tooth (32-pitch) 45-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
This is the battery compartment door and vents for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is black...
View full details
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details
This is the Traxxas auto-detectable temperature sensor.Features: Only for use with the Traxxas Telemetry ExpanderIncludes: Auto-Detectable Temperat...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full details
Traxxas EZ start system is a simple push-button starting for glow plug and starter motor. LED status for both glow plug and starter motor All-in-on...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
Camber link set (plastic / non-adjustable ) ( front & rear) (gray) Non-adjustable gray composite camber link set includes front and rear links...
View full details
Screws, 3x18 button-head machine (hex drive) (6) 3x18 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
MODEL 71054-8: Fully assembled, Ready-To-Race®, with TQ™ 2.4 GHz radio system, Titan® 12T 550 motor, XL-2.5™ electronic speed control, 7.2 volt...
View full details
Rustler 4X4 LED Light Kit Built Traxxas Tough™The Traxxas Rustler® 4X4 takes stadium truck performance to new heights. The all-new High-Output Off...
View full details
MODEL 59076-3: Slayer Pro 4X4: 1/10 scale 4WD nitro short course truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with ...
View full details
Sold out
TAKE THE PATH LESS TRAVELED The Traxxas TRX-4 Scale and Trail Crawler is an all-new Traxxas design that is loaded with innovation that instan...
View full details
Shaft, GTX shock TiN-coated (2) (assembled with rod ends and steel hollow balls) Pair of 110 mm titanium-nitride coated long GTX shock shafts. TiN...
View full details
Traxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Features:Hardened plastic constructionBlack in colorIncludes:One motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknutRequires:...
View full details
This is the Stuffing Tube with Nylon Liner for the Traxxas Spartan.Features: Brass and nylon constructionIncludes: One Assembled Stuffing TubeRequi...
View full details
This is an optional Traxxas LED Light Bar Set and is intended for use with the Traxxas Summit. Now you can blaze even brighter trails! The new Acce...
View full details
This is an optional Traxxas Center Driveshaft Set, and is intended for use with the Traxxas E-Revo and Summit trucks. Traxxas Steel Constant Veloci...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic) Skid plate set includes front and rear skid plates. Replacement pa...
View full details
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full details
Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx) Pair of replacement lower suspension arms for T-Maxx® and E-Maxx® trucks. Replacement part for ...
View full details
Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Alias® tires, foam inserts) (electric rear) (2) Alias® step-pin tires provide...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
Screws, 3x30mm button-head machine (hex drive) (6) 3x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Screws, 3x6mm cap-head machine (hex drive) (6)
Gear, 19-T pinion (48-pitch) / set screw 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Carriers, stub axle (blue-anodized 6061-T6 aluminum)(rear)(2)
The Traxxas Slash 4x4 Pro-Built Rear Differential is a prebuilt replacement for Slash 4X4 Short Course Trucks. Traxxas Pro-Built parts allow you to...
View full details
Save 13%
BIG, LIFTED PERFORMANCE The Traxxas lineup of exciting and capable High Trail TRX-4® models is expanding with the all-new 1979 F...
View full details