Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full details
This is the Traxxas GTR Hard Anodized XX-Long Shocks with Titanium Shafts.Features: Black colored TiN coated shafts Bodies made of alumnum Includ...
View full details
Traxxas Complete GTR Long Shocks feature hard anodized PTFE coated bodies with TiN shafts. These shocks are fully assembled and ready for oil, and ...
View full details
This is a pair of Fully Assembled (without springs) Long Green-Anodized GTR Shocks from Traxxas. Features: Hard Anodized PTFE Aluminum Bodies T...
View full details
Traxxas TRA5853X 17mm wheels hubs set is constructed of anodized blue aluminum.This is the new Traxxas 17mm wheel hub kit for the Traxxas Slash, St...
View full details
Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slas...
View full details
The Traxxas TRX-4 Pre-Mounted Canyon Trail 1.9" Crawler Tires w/Sport Wheels. The 1.9 Canyon Trail S1 compound tires and tuned foam inserts are sup...
View full details
This is a pair of Traxxas Maxx tires and wheels.Features: Fits the 1/10 scale Traxxas E-Maxx, T-Maxx and Revo Wheels constructed of plastic, split...
View full details
Traxxas LED light kit, 1/16 E-Revo (includes power supply, front & rear bumpers, light harness (4 clear, 4 red), wire ties)
This is an optional Front Heavy Duty Axle Shaft (Left and Right) and requires the TRA8064 Front Portal Drive Input Gear (sold separately). Featur...
View full details
TRA5192X 2-SPD UPGRADE SPORTMAXX (right side of C)
Carburetor, Pro (complete, assembled for TRX Pro.15) (6.0mm bore) combine with cooling head (4032) to upgrade TRX .15 to Pro .15 performance. Repl...
View full details
Features: Anodized Blue in Color 6061 T6 Aluminum Construction Countersunk Screw Holes Includes: One Blue Aluminum Chassis
Traxxas optional aluminum engine mount for the Traxxas Nitro T-Maxx. This is located on the chassis and supports the engine. This mount fits both t...
View full details
These are optional Left and Right 30 Degree Caster Blocksfor the Traxxas Jato.FEATURES:Silver Titanium-anodized 6061-t6 aluminum30-degreeINCLUDES:O...
View full details
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH) ¶ÿ This product is not shippable to the USA
Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4" drive Traxxas precision-ground, hardened-steel ball-end hex bits fit ju...
View full details
These are the optional Front Caster Blocks for the Traxxas Jato.These are located on the front suspension assembly.FEATURES:Titanium-anodized alumi...
View full details
Traxxas ProGraphix Custom bodies are painted with the same hot, clean graphics as our regular ProGraphix bodies, however the overall color is left ...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
This is the ProGraphix body for the Traxxas Stampede 4x4 VXL.Features: Black, silver, gray and carbon fiber painted graphics Pretrimmed Includes:...
View full details
TRA9523R Traxxas Chassis brace (T-Bar), 6061-T6 aluminum (red-anodized)/
TRA9523X Traxxas Chassis brace (T-Bar), 6061-T6 aluminum (blue-anodized)/
TRA9523G Traxxas Center brace (T-Bar), 6061-T6 aluminum (green-anodized)/
TRA9523 Traxxas Center brace (T-Bar), 6061-T6 aluminum (black-anodized)/
These are the Aluminum Beadlock Rings used on the Traxxas 1.9" Beadlock Crawler wheels. These are available in 6 different colors listed below. Us...
View full details
Big Bore shocks (x-long) (hard-anodized and PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2)
TRA9496X Traxxas LED light set, front, complete (blue)
TRA9496R Traxxas LED light set, front, complete (red)
TRA9496G Traxxas LED light set, front, complete (green)
Traxxas’ new aluminum turnbuckles make it possible for R/C hobbyists to dress up their Jato™ and save weight at the same time! These turnbuckles co...
View full details
Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm sha...
View full details
TRA9523T Traxxas Center brace (T-Bar), 6061-T6 aluminum (orange-anodized)
Traxxas optional toe links for use on the 1/16 Slash Vehicles. Constructed of anodized red aluminum. Traxxas aluminum toe links are manufactured fr...
View full details
This is a replacement Traxxas Aluminum Rear Axle Carrier Set, and is intended for use with the Traxxas X0-1.
TRA9576 Traxxas Wheelie bar, black (assembled)
TRA9371 Traxxas Tires and wheels, assembled, glued (split-spoke black chrome wheels)
Traxxas 2.1" Response Pre-Mounted Front Tires w/Split-Spoke Wheels. These replacement pre-mounted tires are intended for the Traxxas 4-Tec 3.0 equi...
View full details
TRA9538R Traxxas Shock tower, rear, 6061-T6 aluminum (red-anodized)
TRA9538T Traxxas Shock tower, rear, 6061-T6 aluminum (orange-anodized)
TRA9538G Traxxas Shock tower, rear, 6061-T6 aluminum (green-anodized)
TRA9538A Traxxas Shock tower, rear, 6061-T6 aluminum (gray-anodized)
TRA9538 Traxxas Shock tower, rear, 6061-T6 aluminum (blue-anodized)
This is the chassis for the Traxxas E-Revo 4WD Monster Truck RTR.Features: Nylon construction that’s grey in color Installed foam pads Also fits t...
View full details
This is a replacement Traxxas Aluminum Front Shock Tower, and is intended for use with the Traxxas X0-1.
