This is a pair of Traxxas Aluminum Left/Right Caster Blocks (C-Hubs) in Green. Fits the following models:Ford Fiesta ST RallySlash 4X4 PlatinumSla...
View full details
This is a pack of two optional Traxxas Rear Heavy Duty Machined Axle Shafts for use with the TRX4 series. These heavy duty axle shafts are used i...
View full details
Traxxas power tune cooling head is constructed of machined blue aluminum. Molded head protector Specs:Height: 2" (51mm)Diameter: 2.1" (53mm) at wid...
View full details
This is an optional upgrade Traxxas TRX-4 Front/Rear Outer Portal Drive Housing in Anodized Aluminum. This replaces the stock part TRA8251. Featur...
View full details
Traxxas TRX-4 Pre-Mounted Canyon Trail 2.2 Crawler Tires. The premounted option on black TRX-4 Sport Wheels means they are ready to install when yo...
View full details
This is a pair of Traxxas pre-assembled rims and tires, the 3.8" 6 spoke wheels have a 17mm splined hex and the Talon EXT tires are pre-glued to th...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, paddle tires, foam inserts) (rear) (2) (TSM® rated) Traxxas paddle tire...
View full details
FEATURESOutside U-joint is lubricated and sealed by a rubber boot toprotect it from dirt and grimeU-joint pins are held captive by the ball bearing...
View full details
Tires & wheels, assembled, glued (black chrome 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated) Ultra-rugged Sledgehammer® ti...
View full details
Slash® 2WD Low-CG (Low Center of Gravity) Conversion Kit #5830 Everything to convert your Slash 2WD The Low-CG Conversion Kit lowers your Slash’...
View full details
Traxxas TRX-4 Pre-Mounted Canyon Trail 1.9 Crawler Tires. These are pre-mounted on Satin TRX-4 Wheels. The 1.9 Canyon Trail S1 compound tires and t...
View full details
Traxxas center differential kit for use on the Slayer. From the factory, the differentials are filled with 30K weight silicone diff fluid. This is ...
View full details
This is an optional Traxxas Center Differential Kit, and is intended for use with the Traxxas E-Revo and E-Maxx trucks. The Traxxas center differen...
View full details
This is the Crankshaft w/IPS for the Traxxas 3.3racing engine with starter, TRAG5407.FEATURES:Steel ConstructionIPS (Integrated Pilot Shaft)INCLUDE...
View full details
This is a replacement Traxxas 4-Channel 2.4GHz Transmitter, and is intended for use with the Traxxas QR-1 quad-copter and DR-1 helicopter. This d...
View full details
Tires & wheels, assembled, glued (SCT Split-Spoke black, satin chrome beadlock style wheels, paddle tires, foam inserts) (2) (4WD f/r, 2WD rea...
View full details
This is a pair of Traxxas GTR Assembled XX-Long Shocks (Without Springs) in Green for the Slash 4x4 Ultimate. These shocks feature PTFE-coated bodi...
View full details
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full details
Sledgehammer Extreme Terrain Tires Extreme Terrain TractionSledgehammer extreme-terrain tires provide maximum traction and control on varie...
View full details
This is the Traxxas GTR Hard Anodized XX-Long Shocks with Titanium Shafts.Features: Black colored TiN coated shafts Bodies made of alumnum Includ...
View full details
Traxxas Complete GTR Long Shocks feature hard anodized PTFE coated bodies with TiN shafts. These shocks are fully assembled and ready for oil, and ...
View full details
This is a pair of Fully Assembled (without springs) Long Green-Anodized GTR Shocks from Traxxas. Features: Hard Anodized PTFE Aluminum Bodies T...
View full details
Traxxas TRA5853X 17mm wheels hubs set is constructed of anodized blue aluminum.This is the new Traxxas 17mm wheel hub kit for the Traxxas Slash, St...
View full details
Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slas...
View full details
The Traxxas TRX-4 Pre-Mounted Canyon Trail 1.9" Crawler Tires w/Sport Wheels. The 1.9 Canyon Trail S1 compound tires and tuned foam inserts are sup...
View full details
This is a pair of Traxxas Maxx tires and wheels.Features: Fits the 1/10 scale Traxxas E-Maxx, T-Maxx and Revo Wheels constructed of plastic, split...
View full details
Traxxas LED light kit, 1/16 E-Revo (includes power supply, front & rear bumpers, light harness (4 clear, 4 red), wire ties)
This is an optional Front Heavy Duty Axle Shaft (Left and Right) and requires the TRA8064 Front Portal Drive Input Gear (sold separately). Featur...
View full details
TRA5192X 2-SPD UPGRADE SPORTMAXX (right side of C)
Carburetor, Pro (complete, assembled for TRX Pro.15) (6.0mm bore) combine with cooling head (4032) to upgrade TRX .15 to Pro .15 performance. Repl...
View full details
Traxxas 49mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
This set of two Traxxas 49mm Aluminum Camber Link Turnbuckles makes it easy to add strength and adjustability to 4X4 Traxxas models. These turnb...
View full details
Features: Anodized Blue in Color 6061 T6 Aluminum Construction Countersunk Screw Holes Includes: One Blue Aluminum Chassis
Traxxas optional aluminum engine mount for the Traxxas Nitro T-Maxx. This is located on the chassis and supports the engine. This mount fits both t...
View full details
These are optional Left and Right 30 Degree Caster Blocksfor the Traxxas Jato.FEATURES:Silver Titanium-anodized 6061-t6 aluminum30-degreeINCLUDES:O...
View full details
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH) ¶ÿ This product is not shippable to the USA
Traxxas 39mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4" drive Traxxas precision-ground, hardened-steel ball-end hex bits fit ju...
View full details
These are the optional Front Caster Blocks for the Traxxas Jato.These are located on the front suspension assembly.FEATURES:Titanium-anodized alumi...
View full details
LiPo Cell Voltage Checker/Balancer (2968X)The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included bal...
View full details
Traxxas ProGraphix Custom bodies are painted with the same hot, clean graphics as our regular ProGraphix bodies, however the overall color is left ...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
This is the ProGraphix body for the Traxxas Stampede 4x4 VXL.Features: Black, silver, gray and carbon fiber painted graphics Pretrimmed Includes:...
View full details
