TRA9461 Traxxas Wheels, wheelie bar, black (26mm (2), 18mm (2))
TRAXXAS
Traxxas Drag Slash Wheelie Bar Wheels. Package includes two 26mm wheels and two 18mm wheels.


Traxxas Drag Slash Wheelie Bar Wheels. Package includes two 26mm wheels and two 18mm wheels.
This is the Shift Linkage Set for the Traxxas 3.3 T-Maxx.FEATURES:Installs on shift servo and controls shifting of the transmissionINCLUDES:Servo h...
View full details
Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only) Replacement front and rear center half shafts (plastic parts...
View full details
This is a stock replacement part for the Traxxas Nitro Rustler (not theelectric version).Features: Steel top gear shaft with preinstalled 16 tooth ...
View full details
This is the Traxxas Pink Front Bumper and Mount for Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam trucks.Fits1/10 Monster Jam TrucksCraniacSk...
View full details
This is a Team Traxxas Decal Set for R/C Carsfrom Traxxas.FEATURES:These decals are designed to be used on any scale lexan R/C car and truck bodies...
View full details
FEATURES: Aluminum brake cam construction Plastic brake sleeve construction INCLUDES: One brake cam Part #5388 One plastic sleeve Part #5388 SPECS:...
View full details
This is the a replacement Brake Cam Lever for the Traxxas Jato. Features: Nylon construction Black in color Includes: (1) Brake Came Lever...
View full details
This is the Differential Pulley and Side Cover for the Traxxas Nitro 4-Tec.FEATURES:Plastic constructionBlack in colorINCLUDES:One differential pul...
View full details
This is the center driveshaft for the Latrax SST Stadium Truck.Features: Aluminum constructionIncludes: Center Driveshaft 1.5 x 8mm Steel Pin
This is a set of four Traxxas Suspension Down Stop Screws with a 2.5mm Drill Bit for the Jato. All R/C off-road racers want as much ground clearanc...
View full details
This is a 10x19mm ball bearing from Traxxas. It is primarily for used in the 2-speed Spur Gear on the Traxxas T-Maxx.Features: Ball bearings reduc...
View full details
PROPELLER, 42X59MM Replacement 42x59 mm propeller Replacement part for these models: DCB M41 Widebody Spartan® SR Spartan®
Traxxas optional aluminum brake adapter for the T-Maxx monster truck.; Features blue aluminum construction.; This is to be used with the heavy duty...
View full details
This is the Brake Adapter for the Traxxas T-Maxx 4WD RTR Monster Truck.This adapter fits in the center of the brake disc and fastensto the output y...
View full details
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 15-tooth pinion gear (1.0 metric pitch) fits...
View full details
This is a set of eight Traxxas 5mm Black Serrated Steel Flanged Nylon Locking Nuts for the Unlimited Desert Racer. Features: Made of steelSerrated...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full details
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
Ball bearings, blue rubber sealed (6x12x4mm) (2) Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Ball bearings, black rubber sealed (5x11x4mm) (2) Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Traxxas Gear Center Differential Revo Features: Nylon construction Includes: Gear, two ring seals, gasket and instruction sheet Fits: Traxxas ...
View full details
This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...
View full details
TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)
This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full details
Ball bearings, black rubber sealed (4x10x4mm) (2) Pair of 4x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a replacement Traxxas 4-Tec 2.0 Front and Rear Body Mount Set. Features:Factory Replacement Body Mount Set Includes:(1) Body Mount Set
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
These are the rod ends for the 1/16 scale Traxxas Revo and Slash series.Features: Black nylon constructionIncludes: Eight Nylon Rod Ends Eight Nyl...
View full details
Traxxas 5677A Cover Gear 3x8mm CS Revo (1)This is the Gear Cover for the Traxxas Revo.FEATURESPlastic construction, black in colorFor the single mo...
View full details
TRA9542 Traxxas Suspension pins, outer, front, 3.5x48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)
Ball bearings, black rubber sealed (5x10x4mm) (2) Pair of 5x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the Rear Differential Housing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Includes: (1) Rear Differential Housing
This is an optional Traxxas Rear Suspension Hinge Pin Mount Set. These blocks feature different anti-squat angles which will alter the suspension c...
View full details
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
This is a pair of replacement drive yokes for the Traxxas Revo. These yokes attach to the half shaft assemblies.Features: Black plastic constructio...
View full details
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
This is a replacement Traxxas 4-Tec 2.0 Camber and Toe Link Set. Features:Factory Replacement Part Includes:(6) Camber and Toe Links
This is a replacement Idle Mixture Screw for theTraxxas TRX 2.5 Carb (TRAG5252).FEATURES:Pre-installed gasketINCLUDES:One NeedleSPECS:Length: 13.8 ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS