TOPA0706 Giant Scale Focke-Wulf 190 ARF

Key Features:

• Construction: Balsa & ply and fiberglass¶ÿ
• Wing: One-piece¶ÿ
• Aileron Control: Dual servo with dual servo flap control¶ÿ
• Cowl: Painted fiberglass
• Canopy: Clear with painted-on frame lines, detailed cockpit with instrumentation¶ÿ
• Spinner: Aluminum 5.5" (140mm) diameter, painted red¶ÿ¶ÿ
• Covering: Matte finish MonoKote
• Landing Gear: Heavy duty fixed,¶ÿ 5" (127mm) diameter main foam¶ÿwheels, 1-1/2" (38mm) foam tailwheel¶ÿ
• **Robart makes a set of giant scale 100¶ø rotating retracts for this model ROBQ1665, see COMMENTS¶ÿ
• Fuel Tank: 24oz (720cc), approximate¶ÿ
• Building Time: Ready to fly in several hours
• Warranty: Top Flite Models guarantees this kit to be free of defects¶ÿin material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.

Includes:

• Pre-built fuselage wing and tail assemblies, decals, landing gear,¶ÿwheels, spinner, hardware package, fuel tank, cockpit detail and¶ÿphoto-illustrated instruction manual

Requires:

• Engine: 2.6 - 3.3 cu in (43 - 55cc) gasoline or glow, (the DLE 55 DLEG0055 is recommended. The manual provides specific instructions for the mounting of this engine. Modifcations may be needed if¶ÿmounting other engines. See COMMENTS¶ÿ
• Muffler: To match selected engine, J'TEC makes a muffler (JTCG1040)¶ÿspecifically for use with this airplane and the DLE 55 engine¶ÿ
• Radio: At least 5-channel, 6-channel needed if installing retractable landing gear¶ÿ
• Servos: Nine, all control surfaces require high-torque servos, servos with 40 oz-in of torque can be used for throttle, choke and air¶ÿvalve¶ÿ
• Heavy Duty 24" (310mm) Servo Extensions: Two for ailerons
• Heavy Duty 12" (305mm) Servo Extensions: Five, two for flaps, two¶ÿfor elevator, one for rudder¶ÿ
• Y-Harnesses: One each for aileron, flaps & elevator¶ÿ
• Receiver Battery: At least 1500mAh
• Heavy Duty Switch Harness: Two¶ÿ
• Charge Receptacle: Two¶ÿ
• Servo Arms: Two 1", one 2"¶ÿ
• Building and Field Equipment

Specs:

• Wingspan: 86" (2,185mm)
• Wing Area: 1,262in¶ý (81.4dm¶ý)
• Weight: 23-24lb (10.43-10.88kg)¶ÿ¶ÿ¶ÿ
• Wing Loading: 42-44oz/ft¶ý (128-134g/dm¶ý)¶ÿ
• Length: 72" (1,830mm)
• Airfoil: Semi-symmetrical¶ÿ
• Center of Gravity (CG): 5.5" (140mm) back from the leading edge of the top of the wing on both sides of the fuselage¶ÿ
• Control Throws-¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ Low Rate¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ High Rate¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ
  Elevator Up & Down:¶ÿ¶ÿ¶ÿ3/4" (19mm) 10¶ø¶ÿ¶ÿ 1" (25mm) 13¶ø¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ
  Rudder Right to Left:¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ 1" (25mm) 9¶ø¶ÿ¶ÿ¶ÿ¶ÿ1-7/8" (48mm) 18¶ø¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ
  Ailerons Up & Down:¶ÿ¶ÿ¶ÿ 3/4" (19mm) 13¶ø ¶ÿ1" (25mm) 18¶ø¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ
  Flaps:¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ¶ÿ 2-1/2" (64mm) 36¶ø