MPUA2260 Easy Star II Kit

by Muliplex USA

Key Features:

  • Construction: Elapor foam on the fuselage, wing and tail section
  • Wings: Two-piece, foam construction, white in color, may be built with optional ailerons
  • Radio Compartment: Foam, sized for high capacity LiPo packs
  • Landing Gear: No landing gear, model lands on its belly 
  • Hardware: Pushrods and other hardware included 
  • Spinner: White plastic 1.4" (35mm)  
  • Propeller: Plastic, folding pusher type, pro faces the rear of the airplane
  • Decals: Precut colorful Easy Star II logo decals


  • Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware


  • Radio: 3-channel 
  • Servos: Two nano (rudder, and elevator control), two extra servos are required if building with ailerons       
  • Servo Extensions: Two 12" (305mm) 
  • Motor: 28mm brushless outrunner with at least 200W output 
  • ESC: Brushless compatible, to match selected motor 
  • Battery: 3S 1500-2500mAh LiPo
  • Battery Charger: To match selected LiPo battery 
  • LiPo charge bag and miscellaneous building equipment


  • Wingspan:   54" (1370mm) 
  • Wing Area: 435 sq in (2810 sq dm) 
  • Wing Loading: 8.28 oz/sq ft (25.27 g/sq dm) 
  • Weight:     25 oz (709 g) 
  • Length:     38.5" (978mm) 
  • Airfoil: Flat bottom, high wing configuration
  • Center of Gravity: 3.07" (78mm) back from the wing's leading edge at the fuselage sides.
  • Control Throws-                                                     
    Elevator: 0.20" (5mm) up, 0.16" (4mm) down                        
    Rudder: Right & Left 0.39" (10mm)