HAN5060 Hangar 9 Valiant 30cc ARF

by HANGAR 9
$850.49

Key Features:

  • Giant-scale versatility with an executive look
  • Outstanding performance with a wide speed envelope
  • Top quality balsa and plywood construction thatƒ??s strong and light
  • Genuine Hangar 9¶© UltraCote¶© film covering
  • Functional flaps that significantly expand the flight envelope
  • Two-piece, plug-in cantilever wing
  • Removable horizontal and vertical tail surfaces
  • Finished fiberglass cowl and wheel pants in matching colors
  • Painted aluminum landing gear
  • Tinted windows and windshield
  • Pre-drilled or pre-slotted control surface hinge locations
  • Ready to mount the Evolution¶© 33GX gas engine
  • Electric motor mount kit (sold separately) makes conversion easy
  • Complete high-grade hardware package included
  • Optional float kit and tundra-style landing gear (available)

You will need:

Internal Combustion
- 6+ channel Transmitter and Receiver radio system
- (8) standard digital servos
- Receiver and ignition pack
- Engine
- Propeller
- Engine kill switch
- Spinner

Electric Power
- 6+ channel Transmitter and Receiver radio system
- (7) standard digital servos
- Motor
- ESC
- Propeller
- Motor battery
- EP mount set
- Spinner

Specs:

  • Wingspan:¶ÿ108.3 in (275 cm)
  • Overall Length:¶ÿ78.2 in (199 cm)
  • Wing Area:¶ÿ1663.0 sq. in. (107.3 sq. dm.)
  • Flying Weight:¶ÿ16.5 - 17.5 lb ( 7.48 - 7.94 kg)
  • Engine Size:¶ÿ33cc
  • Motor Size:¶ÿPower 160
  • Radio:¶ÿ6+ channel
  • Servos:¶ÿGas/Petrol: 8 servos EP: 7 servos
  • Trim Scheme Colors:¶ÿWhite, Silver, True Red
  • CG (center of gravity):¶ÿ4-1/8 - 4-3/4 in (105-121 mm) behind leading edge at wing root.
  • Wing Loading:¶ÿ23-24 oz/sq ft.
  • Prop Size:¶ÿGas/Petrol: 17-18x8, EP: 18x10
  • Spinner Size:¶ÿ3.25 in (83 mm)
  • Speed Control :¶ÿ80A HV
  • Recommended Battery:¶ÿEP: 37.0V 10S (5S x2) 5000mAh LiPo RX: 6.6V 2S 2200 - 3000mAh Li-Fe
  • Flaps:¶ÿYes
  • Control Throw (Ailerons):¶ÿLow: 15/16 in Up, 13/16 in Down, High: 1-1/8 in Up, 15/16 in Down
  • Control Throw (Elevator):¶ÿLow: 1-3/8 in Up and Down, High: 1-3/4 in Up and Down
  • Control Throw (Flaps):¶ÿ3.0 in Full, 1-1/2 in Mid
  • Recommended Environment:¶ÿOutdoor
  • Assembly Time:¶ÿ15-20 Hours
  • Is Assembly Required:¶ÿYes
  • Experience Level:¶ÿIntermediate
  • Control Throw (Rudder):¶ÿLow: 2-1/8 in Left and Right High: 2-3/4 in Left and Right

You recently viewed

Clear recently viewed