Menu
Cart 0
HAN5015 Hangar 9 Meridian 10cc ARF

HAN5015 Hangar 9 Meridian 10cc ARF

Hangar 9

  • 38899


Key Features:

  • Designed to fit the Evolution® 10cc gas engine
  • Flaps for expanded flight envelope
  • Tricycle landing gear
  • Covered in genuine UltraCote® covering
  • Landing gear attached to fuselage
  • Large top fuselage hatch for easy access to radio gear and EP battery
  • Pre-painted fiberglass cowl and wheel pants
  • EP-ready
  • Two-piece plug-in wings
  • Preinstalled pilot figure and instrument panel

You will need:

Common Radio Equipment:
- 5+ channel transmitter and receiver radio system
- Receiver pack
- Charge switch
- Standard servos (7)

Gas Setup:
- 10cc 2-stroke gas engine
- Muffler
- Propeller
- Starter battery
- Fuel
- Fuel tubing

Electric Setup:
- 46-size motor
- Speed controller
- Flight battery
- Charger for flight battery
- Propeller

Specs:

  • Wingspan: 69.0 in (175 cm)
  • Overall Length: 55.5 in (140 cm)
  • Wing Area: 880 sq in (56.8 sq dm)
  • Flying Weight: 7.0–8.0 lb (3.2–3.7 kg)
  • Engine Size: 10cc gas; 0.52-0.60 2-stroke glow; 0.62-0.72 4-stroke glow
  • Motor Size: Power 46
  • Radio: 5-channel radio system minimum
  • Servos: 7 standard servos (6 for EP)
  • Trim Scheme Colors: UltraCote® covering - True Red (U866), White (U870), Black (U874)
  • CG (center of gravity): 3.3-3.8 in (84-96mm) behind the leading edge
  • Wing Loading: 18.3–20.9 oz/sq ft (56.3–65.1 g/sq dm)
  • Prop Size: 12 x 6–13 x 6 (10cc); 14 x 7E (EP)
  • Spinner Size: 2.25 in (57mm)
  • Recommended Battery: 14.8V 4S 4000mAh Li-Po
  • Flaps: Yes
  • Retracts: No
  • Control Throw (Ailerons): Low: 0.5 in (13mm) up/down; High: 0.75 in (19mm) up/down; 20% Expo
  • Control Throw (Elevator): Low: 0.75 in (19mm) up/down; High: 1.0 in (25mm) up/down; 20% Expo
  • Control Throw (Rudder): Low: 1.0 in (25mm) left/right; High: 1.5 in (38mm) left/right; 20% Expo
  • Control Throw (Flaps): 0.75 in (19mm) mid flap; 1.50 in (38mm) full flap
  • Minimum Age Recommendation: 14 years
  • Experience Level: Intermediate
  • Recommended Environment: Outdoor
  • Assembly Time: 10-15 Hours
  • Is Assembly Required: Yes

We Also Recommend