DUMA1813 Aeronca C-3 Kit


Key Features:

  • Construction: Hand selected laser cut balsa
  • Vacuum molded nose cowl 
  • Rudder Control: Pull-pull cables
  • Elevator Control: Wire pushrod 
  • Servo Placement: Mounted in rails on fuselage
  • Landing Gear: 1/16" diameter wire front, .041 diameter wire rear, requires bending


  • All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows


  • GWS IPS (indoor power system) motor with "A" ratio gear drive
  • 3 channel radio system (minimum) 
  • 2 micro servos
  • 5A ESC w/BEC GWSM2059
  • 2 cell 700mAh LiPo battery 
  • GWS 8x6 prop, GWSQ2017
  • Building and field equipment


  • Length: 22" (559mm)
  • Wingspan: 40" (1016mm)
  • Wing Area: 329 sq.in. (21.25 sq dm)
  • Airfoil: Flat bottom, high wing placement
  • Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side
  • Control Throws:
  • Elevator, Up and Down: 3/4" (19mm) 
  • Rudder, Left and Right: 1" (25mm)

You recently viewed

Clear recently viewed