DUMA1811 Pacer Kit 40


Key Features:

  • Construction: Hand selected laser cut balsa 
  • Vacuum molded nose cowl  
  • Rudder Control: Pull-pull cables
  • Elevator Control: Wire pushrod  
  • Servo Placement: Mounted in rails on fuselage 
  • Landing Gear: 1/16" diameter wire front, .041 diameter wire rear, requires bending


  • All balsa, lightweight colored (black, white and red) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, one 3/4" (19mm) lightweight plastic tail wheel, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, acetate sheet for windows


  • GWS IPS (indoor power system) motor with "A" ratio gear drive
  • 3 channel radio system (minimum)
  • 3 micro servos  
  • 5A ESC w/BEC GWSM2059
  • 2 cell 700mAh LiPo battery
  • GWS 9x7 prop, GWSQ2019
  • Building and field equipment


  • Length: 27" (686mm) 
  • Wingspan: 40" (1016mm) 
  • Wing Area: 272 sq.in. (17.57 sq dm)
  • Airfoil: Flat bottom, high wing placement
  • Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the wing at the fuselage side 
  • Control Throws:
  • Elevator, Up and Down: 9/16" (14mm)
  • Rudder, Left and Right: 15/16" (23.5mm)

You recently viewed

Clear recently viewed