DUMA1810 Tiger Moth Kit 35


Key Features:

  • Construction: Hand selected laser cut balsa 
  • Vacuum molded cowl and spinner 
  • Rudder and Elevator Control: Wire pushrod  
  • Servo Placement: Mounted in rails on fuselage  
  • Landing Gear: 1/16" diameter wire front, tail wire skid requires bending


  • All balsa, lightweight colored (black and white) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid, lightweight plastic tail wheel, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, acetate sheet for windows and vacuum molded cowl and spinner


  • GWS IPS (indoor power system) motor with "A" ratio gear drive 
  • channel radio system (minimum) 
  • 3 micro servos  
  • 5A ESC w/BEC GWSM2059
  • 2 cell 700mAh LiPo battery 
  • GWS 9x7 prop, GWSQ2019  
  • Building and field equipment


  • Length: 25" (635mm) 
  • Wingspan: 35" (889mm) 
  • Wing Area: 352sq.in. (22.74 sq dm)
  • Airfoil: Flat bottom  
  • Center of Gravity (CG): 3-7/16" 87.5mm) back from the leading edge of the TOP wing 
  • Control Throws:
  • Elevator, Up and Down: 1/2" (13mm)
  • Rudder, Left and Right: 1" (25.5mm)

You recently viewed

Clear recently viewed