BSI209 FNSH CURE 20MIN EPY 4 1/2OZ

This is a four and a half ounce package of Bob Smith Industries FINISH-CURE€«’???¶ô¶« 20 Minute Epoxy. FINISH-CURE€«’???¶ô¶« 20 minute epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE€«’???¶ô¶« can be sanded the easiest of all the BSI epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE€«’???¶ô¶« should be heated to a temperature above 85*F or when applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE€«’???¶ô¶«. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70*F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spackling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE€«’???¶ô¶« is best mixed in a disposable cup.Ç??¶ôǨ